User manual

Installing and Connecting the Unit 9
En
4 Place the TV in its final position.
Caution
• Pioneer is not responsible for any accidents or
damage that result from improper installation/
mounting, incorrect use, modification, disaster,
etc.
• Place the TV in the center of the unit.
• Place the TV so that its stand does not stick out
over the unit.
• Place the unit so that it does not extend out over
the TV rack, shelf etc.
• Refer to the operating instructions for your TV for
methods to prevent the TV from tipping over or
falling. Do not attach any parts intended to prevent
the TV from tipping over or falling (such as belts
etc.) to this unit. Doing so may cause damage to
the unit, or result in fire or electric shock. Doing
so may also mean the TV can tip over or fall, and
being damaged or causing injury.
5 Connect the power cord.
Note
• Some TVs have settings for digital audio output. For
details, see the operating instructions for your TV.
• Set audio output from the built-in speakers of the
TV to OFF. If this cannot be set, set the TV volume
to the minimum level.
Connections with
external device
You can connect a playback device (BD, DVD,
or CD player) with an optical digital audio
output or a satellite broadcast tuner or other
device with a coaxial digital audio output to the
unit to enjoy the sound of that device.
Digital audio pin cable (commercially available)
Satellite broadcast tuner,
cable TV tuner,
or other device
BD player or other device
Optical digital audio cable
(commercially available)
Note
• An optical digital audio cable with a square plug
can be connected to this unit.
• When an MPEG2-AAC (digital broadcast) signal is
input to a digital audio input terminal, sound not
be output.
If sound is not output, switch the audio output of
the device connected to the digital audio input
terminal to PCM.
For the switching procedure, refer to the operating
instructions for the connected device.
• Some connected devices have settings for the
digital audio output. For details, see the operating
instructions for the specific playback device.