User manual

Before you start 7
En
Rear panel
1 2 43 5
1 Optical digital audio input 1 terminal
(page 8)
Connect a TV or other device with an
optical digital audio output.
2 Optical digital audio input 2 terminal
(page 9)
Connect a BD, DVD, or CD player or other
device with an optical digital audio output.
3 Coaxial digital audio input terminal
(page 9)
Connect a satellite broadcast tuner or
other device with a coaxial digital audio
output.
4 Analog audio input terminal
(page 8)
(3.5-mm stereo mini jack)
Connect a TV, portable audio player, or
other device with an analog audio output.
5 AC IN terminal
Be sure to connect this last.
Front panel
1 2 5 6 7 8 9 a3 4
b
1
u
/I
Turns the power of the unit on/off (standby
mode).
2 INPUT SELECT
Switches the input.
3 VOLUME +/–
Adjusts the volume.
4 Input selection indicators
The indicator corresponding to the
selected input is lit.
Green: TV, BD/DVD, STB
Orange: ANALOG
5 SURROUND indicator
Lit when the surround is on.
6 NIGHT indicator
Lit when the night function is on.
7 AUTO LEVEL CONT indicator
Lit when the auto level control function is
on.
8 DIALOG indicator
Lit when the dialog function is on.
9
/DTS indicator
Lit when any of the following audio formats
is input.
Green: Dolby Digital
Red: DTS
Off: PCM
a BT AUDIO indicator
Lit when connected with a Bluetooth
device.
Flashes when not connected with a
Bluetooth device.
Quick flashing: Pairing mode
Slow flashing: Connection standby mode
b Remote control sensor
Note
• Refer to page 15 for details on indicator displays.