HTP-071 S-22W-P S-11-P HOME CINEMA PACKAGE SUBWOOFER SPEAKER SYSTEM Discover the benefits of registering your product online at http://www.pioneer.co.uk (or http://www.pioneer.eu).
Thank you for buying this PIONEER product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. These operating instructions have has been written for joint use with the S-22W-P and S-11-P models. Please consult those portions of the manual indicated for your model. WARNING: Do not climb or sit on this unit. Be especially careful when children are around.
Contents Features ............................................... 3 Accessory Items .................................. 3 Installation .......................................... 3 Connections and Use .......................... 6 Specifications ...................................... 8 Troubleshooting .................................
Satellite speakers (S-11-P) • Labels located on the rear of each speaker indicate whether they are designed for front or surround use. • Speakers installed to the right and left should be separated by about 1.8 m to 2.7 m distance. They should be installed at equal distances from the television, and at equal heights from the floor. • Optional speaker stands can be purchased to facilitate optimal mounting of the surround speakers at or slightly above the listener’s ear height.
• • • • Pioneer is not responsible for any accidents or damage that result from improper installation, misuse or modification of the product, or natural disasters. Maintenance of external surfaces: • Clean the surface by wiping with a soft, dry cloth. • When the surfaces are very dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleaners.
Connections and Use Connection Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. Connecting the speakers To get the best out of your speakers it is important that you connect them properly to your receiver. Each speaker connection consists of a positive (+) and a negative (–) terminal. These should be matched between the receiver and the speaker. 1 Attach one end of the supplied speaker cord to the rear of the each speaker.
Wall-mounting the front and surround speaker system (S-11-P) Attaching the brackets • When attaching the speakers to brackets, always use the furnished brackets for wall mounting. • Make sure to tighten the supplied screw as securely as possible when attaching the bracket to the back of the speaker. • Do not attach brackets to center speaker or subwoofer. • Use the M5 metric thread screw. Do not use inch thread screw.
Specifications S-22W-P Cabinet.......................................................................................................................... Bass-reflex, floor type Speaker ..................................................................................................................................16 cm cone type Nominal impedance ...................................................................................................................................6 Ω Outline Dimension...........
Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer to carry out repair work. Symptom Cause Remedy No sound.
http://www.pioneer.co.uk http://www.pioneer.eu © 2011 PIONEER CORPORATION. All rights reserved. PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901, 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.
