DJ MIXER DJM-250-K DJM-250-W http://www.prodjnet.com/support/ The Pioneer website shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort.
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same. 1) 2) 3) 4) 5) 6) 7) Read these instructions.
WARNING This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.
Contents How to read this manual The names of displays, menus, and buttons in this manual are enclosed in brackets. (e.g. [MASTER] channel, [ON/OFF], [File] menu) Before start Features........................................................................................................ 5 System setup example................................................................................ 5 What’s in the box.........................................................................................
Before start Before start Features This unit is a DJ mixer that carries over the technology of the Pioneer DJM series, the world standard in club sound. It is a standard type unit equipped with the basic functions required for mixing, enabling full-fledged DJ play easily. SOUND COLOR FILTER MIC/AUX INPUT Each channel is equipped with a SOUND COLOR FILTER function by which filter effects can be achieved simply by turning a large control.
Connections Be sure to turn off the power and unplug the AC adapter from the power outlet before making or changing connections between devices. Wait until all connections between devices have been completed before connecting the AC adapter. Only use the AC adapter included with this unit. Refer to the operating instructions for the component to be connected.
Connecting the input/output terminals ! Rear panel, front panel Audio input section Connections When creating a DVS (Digital Vinyl System) combining a computer, audio interface, etc., be careful in connecting the audio interface to this unit’s input terminals and in the settings of the input selector switches. Also refer to the operating instructions of the DJ software and audio interface.
About the AC adapter Safety instructions To ensure your personal safety and to maximize the full operating potential of your unit, read and follow these safety instructions. Read & Retain Instructions Read all operating and user information provided with this product. Cleaning Use a damp cloth to clean the exterior housing. Avoid using any fluids including liquid, aerosol or alcohol-based cleaning products.
Mounting the power plug Connections Slide the power plug along the guide rails in the AC adapter unit as shown on the diagram below, then press in until a click is heard. Removing the power plug While pressing the [PUSH] button on the AC adapter unit, slide the power plug away from the adapter as shown on the diagram below to remove it. Once the power plug is mounted, there is no need to remove it. Power plug The power plug shown below is included with this product.
Operation Mixer section Control panel MIC/AUX section 9 MIC/AUX MIC OFF TRIM AUX 1 AUX 2 2 AUX 3 LEVEL Two sets of audio signals can be adjusted separately for basic DJ mixing (page 11).
Basic operations (mixer section) 9 TRIM CD a b PHONO /LINE CD TRIM PHONO /LINE c 9 9 HI HI a b 9 MID d EQ 9 LOW 1 CH-2 OVER OVER +4 +4 +2 +2 0 0 -6 -6 -12 -12 -18 -18 dB dB 6 Turn the [MASTER LEVEL] control 1 clockwise. 9 d MID EQ 9 LOW LEVEL 9 Switch the channel whose sound is output from the speakers. — Left edge: The [CH-1] sound is output. — Center position: The sound of [CH-1] and [CH-2] is mixed and output. — Right edge: The [CH-2] sound is output.
3 Move the crossfader f gradually towards the right. While checking the sound output from the speakers, operate the crossfader to substitute the sound of [CH-1] with the sound of [CH-2]. Mixing is completed once only the [CH-2] sound is being output from the speakers.
To start playback using the crossfader 1 Set [THRU, , ] (the crossfader curve selector switch) j to [ ] or [ ]. Using a microphone or external device (MIC/AUX section) MIC/AUX MIC Turn the fader start function on. AUX 1 AUX 2 AUX 3 LEVEL 3 3 Move the crossfader f. 0 HI Move the crossfader to the opposite edge from the channel for which you want to use the fader start function. 4 4 Set the cue on the DJ player. The DJ player pauses playback at the cue point. 5 Move the crossfader f.
Additional information Troubleshooting ! ! Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
About trademarks and registered trademarks ! ! ! Pioneer is a registered trademark of PIONEER CORPORATION. The names of companies and products mentioned herein are the trademarks of their respective owners. When playing music files you have acquired on this unit, we kindly ask you to respect copyrights. MASTER output terminal RCA pin jacks..................................................................................... 1 set BALANCED OUTPUT output terminal XLR connector................................
En
Additional information 17 En
En
Pioneer Electronics(USA) Inc. Limited Warranty PRODUCTS COVERED MODEL PREFIX DJ Compact Disc Player DJ DVD Player Digital Media Player DJ Mixer DJ Effector Video Switcher WARRANTY PERIOD Parts Labor CDJ, CMX .................................................................................... 1 YEAR DVJ .............................................................................................. 1 YEAR DMP .............................................................................................
To register your product, find the nearest authorized service location, to purchase replacement parts, operating instructions, or accessories, please go to one of following URLs : Pour enregistrer votre produit, trouver le service après-vente agréé le plus proche et pour acheter des pièces de rechange, des modes d’emploi ou des accessoires, reportez-vous aux URL suivantes : In the USA/Aux Etats-Unis http://www.pioneerelectronics.com In Canada/Aux Canada http://www.pioneerelectronics.
