Operation Manual

10 Enjoying through External Equipment
48
En
Watching a VCR image
Connecting a VCR
Use the INPUT 2 or 3 terminal when connecting a VCR
and other audiovisual equipment.
If your VCR supports TV-VCR advanced “AV link” sys-
tems (page 49), you can connect the VCR to the INPUT
2 or 3 terminal on the Media Receiver using the fully-
wired 21-pin SCART cable.
AV link advanced system
• Download tuning information directly from TV to VCR
(Preset download).
• While watching TV, you can record a programme with
a one-touch press of the VCR recording button.
(WYSIWYR*)
*Refer to your VCR operation manual as some VCRs
have an exclusive key for WYSIWYR.
Displaying a VCR image
To watch a VCR image, press INPUT 2 on the remote
control unit or press INPUT on the Plasma Display to
select INPUT2.
• When you press the play button on the VCR, the
system automatically turns on from standby and
displays a VCR image.
•TV-VCR advanced “AV link” systems may not be
compatible with some external sources.
VCR
Media Receiver (rear view)
SCART cable
(commercially available)
SERVICE ONLY
i / o link.A
SELECT
CONTROL
SUB WOOFER
OUTPUT
INPUT 3
COMPONENT
S-VIDEO
VIDEO R-AUDIO-L
MONITOR
OUTPUT
YP
B P R
VIDEO
IN OUT
INPUT 1
INPUT 2 INPUT 3
AC INLET
BLACK
WHITE
SYSTEM CABLE
INPUT
23
INPUT 1
INPUT 2
INPUT 3
• If VCR images do not come in clearly, you may need
to change the input signal type setting using the
menu. See pages 65 and 66.
•Refer to your VCR operation manual for the signal
type.