Owner's Manual

06Basic Operations

English

Watching TV channels

Unless you set up TV channels that you can watch under the

current conditions, you cannot tune in those channels. For the

procedure, see “Setting up TV channels” on page 24.

• When watching a digital TV program, you may see emergency alert

messages scrolling at the top of the screen. Those messages are

broadcast by TV stations as necessary when in emergency situations.

Selecting the analog and digital channels

To watch a TV program, first select “ANALOG CH” or

“DIGITAL CH” by pressing the INPUT button.

Changing channels

To increase the channel number, press the CH + button on the

remote control unit. To decrease the channel number, press the

CH – button.

• CHANNEL +/– on the Plasma Display has the same

function as CH +/– on the remote control unit.

Using 0 – 9 and •(dot) on the remote control unit

Select channels directly by pressing buttons 0 to 9. To select

subchannels, also use the •(dot) button.

EXAMPLE

•To select channel 5 (1-digit channel), press 5.

•To select channel 25 (2-digit channel), press 2 then 5.

•To select channel 125 (3-digit channel), press 1, 2, then 5.

•To select subchannel 10-1, press 1, 0, •(dot), then 1.

•To select subchannel 10-15, press 1, 0, •(dot), 1, then 5.

•After entering a channel or subchannel number, you may press CH

ENTER to tune in the channel more quickly.

•To return to the previous channel, press the CH RETURN button.

MUTING

VOLCH

C.C.

FAVORITE

RETURN

EXIT BACK

SLEEP

DISPLAY

SCREEN SIZESOUND EFFECT

HD WIDEINPUT

AV SELECTION

11 3322

44 6655

77 9988

ENTER

07-PDP5016HD-Eng (18-22) 4/7/06, 21:3619