Owner's Manual

06 Basic Operations
18
En
Turning the power on and off (Standby)
1
Press the POWER button on the bottom of the Plasma
Display to enter the standby mode.
• The POWER indicator lights up red.
2
Press the TV button on the remote control or the
STANDBY/ ON button on the Plasma Display.
• The Plasma Display switches to on. The POWER
indicator changes to blue.
3
To switch the Plasma Display off, press the TV button
on the remote control or the STANDBY/ ON button on
the Plasma Display for 1 second.
• The Plasma Display enters to standby mode and the
POWER indicator changes to red.
4
To switch the Plasma Display off completely, press the
POWER button on the bottom of the Plasma Display.
• The POWER indicator lights off.
• If you are not going to use the Plasma Display for a long period of
time, disconnect the power cord of the Plasma Display from a wall
outlet.
• If the Plasma Display is switched off completely, you cannot turn the
Plasma Display on by pressing the TV button on the remote
control.
• If the Plasma Display is switched off completely, it cannot switch the
Plasma Display on automatically by the “On Timer” setting.
• If the Plasma Display is switched off by pressing the POWER
button (the system does not enter the standby mode), you can turn
the Plasma Display on by pressing the POWER button the next
time.
POWER button
POWER
indicator
STANDBY/ON button
OK
INPUT
STANDBY/ON
Front view
(PDP-5016HD)
STANDBY
/ON
INPUT
OK
MENU
VOL+
(PDP-4216HD)
PDP-5016HD
PDP-4216HD
POWER
button
STANDBY/ON
button
POWER indicator
SCREEN SIZESOUND EFFECT
HD WIDEINPUT
TV
AV SELECTION
11 3322
44 6655
07-PDP5016HD-Eng (18-22) 4/7/06, 21:3618