Operating instructions

ManualsBrandsPioneer ManualsTVs & monitorsPDP-436XDE

Enjoying through External Equipment

English

Using HDMI Input

This Plasma Display System is equipped with two HDMI

terminals (INPUT 3 and 4) which accept digital video and audio

signals. To use the HDMI terminal, activate the terminal and

specify the types of video and audio signals to be received from

the connected equipment. For the types of these signals, see

the operation manual that came with the connected

equipment.

Before starting the menu, press INPUT 3 or INPUT 4 on the

remote control unit or press INPUT on the Media Receiver to

select INPUT 3 or INPUT 4.

For audio, the system supports the following:

• Linear PCM (STEREO 2ch)

• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

NOTE

• PC signals are out of correspondence.

Connecting HDMI equipment

When using the INPUT 3 HDMI terminal:

When using the INPUT 4 HDMI terminal:

To activate the HDMI terminal:

When you use the INPUT 3 HDMI terminal, use the following

procedure to activate the terminal.

1 Press HOME MENU.

2 Select “Option” ( / then ENTER).

3 Select “HDMI Input” ( / then ENTER).

4 Select “Setting” ( / then ENTER).

5 Select “Enable” ( / then ENTER).

6 Press HOME MENU to exit the menu.

NOTE

• You need not activate the INPUT 4 HDMI terminal; you

cannot manually deactivate this terminal.

To specify the type of digital video signals:

1 Repeat steps 1 to 3 provided for “To activate the HDMI

terminal.”

2 Select “Video” ( / then ENTER).

3 Select the type of digital video signals ( / then ENTER).

• If you select “Auto”, an attempt will be made to identify

the type of digital video signals when digital video

signals are received.

4 Press HOME MENU to exit the menu.

Input signal correlation table

1920*1080i@50Hz

720*576p@50Hz

1280*720p@50Hz

720(1440)*576i@50Hz

1920*1080i@59.94/60Hz

720*480p@59.94/60Hz

1280*720p@59.94/60Hz

720(1440)*480i@59.94/60Hz

1920*1080p@24Hz

INPUT 1

CONTROL

SERVICE ONLY

IN OUT

ANT

i /o link.A

SELECT

INPUT

2 3

INPUT 3

HDMI HDMI

SYSTEM CABLE

ANT(DIGITAL)

INOUT

OPTICAL

DIGITAL OUT

COMMON INTERFACE

INPUT 2

COMPONENT VIDEO

AUDIO OUTPUT

INPUT 4

R-AUDIO-L SUB

WOOFER

PB PR

BLACK

WHITE

ece

ver

(

rear v

)

HDMI cable

(commercially

available.)

SCART cable

(commercially available.)

Connect the SCART cable only

when inputting analogue audio

signals.

HDMI equipment

Item Description

Disable

(factory default)

Deactivates the HDMI terminal.

Enable Activates the HDMI terminal.