Owner's Manual

65
En
Adjustments and Settings
11
English
AV mode
PC mode except for XGA signals
PC mode for XGA signals
Selecting a screen size automatically
The Plasma Display automatically selects an appropriate
screen size when video signals are received from a connected
HDMI equipment (see page 68). To activate this function, use
the following procedure.
1 Press HOME MENU.
2 Select “Option”. ( / then ENTER)
3 Select “Auto Size”. ( / then ENTER)
4 Select “On”. ( / then ENTER)
5 Press HOME MENU to exit the menu.
NOTE
• Manually select an appropriate screen size if an image does
not automatically switch to a correct screen format.
• When the video signal contains no aspect ratio information,
the function will not work even with “On” selected.
Selecting a screen size for received 4:3 aspect
ratio signals
Specify whether the Plasma Display should choose the 4:3
mode or WIDE mode when 4:3 aspect ratio signals are received
with the Auto Size function activated.
1 Press HOME MENU.
2 Select “Option”. ( / then ENTER)
3 Select “4:3 Mode”. ( / then ENTER)
4 Select “WIDE” or “4:3”. ( / then ENTER)
5 Press HOME MENU to exit the menu.
4:3
WIDE FULL
CINEMA ZOOM
4:3
Dot by
Dot
FULL
4:3
FULL2 FULL1
Item Description
Off
(factory default)
Deactivates the Auto Size function.
On Activates the Auto Size function.
Item Description
WIDE
(factory default)
Wide image without side masks
4:3 Keeps the 4:3 aspect ratio and presents side
masks.
Auto Size
Off
On
4:3 Mode
WIDE
4:3
4:3WIDE
PDP5060HD.book Page 65 Friday, July 15, 2005 11:30 AM