Manual

BEFOREOPERATINGTHE PLAYER I
[]
[]
When you press the
, _, , EJECT (A)button onthe
front of the desired Rack,
, ; L , ,,,4 "
i;i' _P'9 ' __2J)J)the Rack opens slightly.
Slowly pull the Rack
forward until it is
completely open.
[]
[] Repeat 2~4
[]
I
Insert discs into the Rack I
I
(only 12-cm discs)
Insert desired discs into the Racks (1 - 4). Up to 25 discs may be
inserted into each rack, and a total of 100 discs can be inserted
into the player. The disc grooves are numbered from the left side
of the rack.
Rack 1 : Disc numbers 1 to 25
Rack2 : Disc numbers 26 to 50
Rack 3 : Disc numbers 51 ,to 75
Rack4 : Disc numbers 76 to 100
[] Manually open the front panel by pulling it
toward you.
[] When you press the EJECT ( A ) button on the
front of the desired Rack, the Rack opens slightly.
Slowly pu IIthe Rack forward until it is completely
open.
[] Position discs with the label sides rightward.
Up to 25 discs can be loaded per Rack.
[] Push the Rack back to its original position.
• Gently close the Rack completely.
[] Insert other discs into the other Racks by
repeating steps 2 to 4.
[] Manually close the front panel.
PRECAUTION:
• If discs are inserted label sides leftward, they will not be played.
• Never insert objects other than discs (song cards, explanations
of disc contents, etc.) into the Rack.
• Do not touch the playing surface of discs (the side that has no
label) with hands or fingers.
• Never insert more than one disc in the groove of the Rack.
• Never insert an 8-cm CD or with its adaptor into the Rack.
• Be careful not to insert your hands in the cabinet beyond the
Rack.
• Please be careful not to pinch your hands or fingers when closing
the Rack or front panel.
-- NO TE
If adjacent discs adhere to each other after they have been inserted, gently touch both
sides of each disc with the supplied Electrostatic charge removal sheet.
• Discs may be electrified naturally due to environmental changes. An electrified disc may
lead to a malfunction.
9
<PRB1227>
En