Manual

ManualsBrandsPioneer ManualsAudio EquipmentOfficial Pioneer cd player

CONNECTIONS

• Make sure that all of the components are turned off before making connections.

Control cable

Stereo amplifier

I?ooO

Red Red

Cassette deck

..... ......................,

CD-DECKSYNCHROcable

v v _ (Suppliedwith the cassette deck)

_1_ To the CONTROL IN jack of the

Pioneer component bearing the

_] mark.

OUT

Power cord 1_

CD player

To a household AC wall outlet.

Making connections

[] Connect the output jacks (LINE OUT) of this unit to the input

jacks (CD or AUX) of the amplifier by Output cable. Make sure

that the white plugs are connected to the left (L) jacks and the

red plugs to the right (R) jacks.

CD White

Red

• Be sure not to connect this unit to the amplifier's PHONO

jacks, as sound will be distorted and normal playback will not

be possible.

12_Connect the power cord to a household AC wall outlet.

• Make sure plugs are inserted fully into the wall outlet.

NOTE:

Do not connect the power cord to an AC outlet on your ampfifier.

If you connect the power cord to a "SWITCHED" AC outlet on an

amplifier, you will not be able to use this unit's memory function.

System remote control with a Pioneer stereo

amplifier that has the [] mark

When a Pioneer stereo amplifier bearing the [] mark is used,

connect the CONTROL IN jack on the rear panel of the CD player

to the CONTROL OUT jack of the amplifier by Control cable. This

will enable the CD player to be controlled using the remote control

unit supplied with the stereo amplifier. If you do not plan to use

this feature, it is not necessary to connect CONTROL IN/OUT

jacks.

• The remote control unit supplied with the amplifier can be used

to control Play, Stop, Pause, Track/Disc Search and Disc Change

operations.

• For instructions regarding connections and operation, refer to

the operating instructions provided with your stereo amplifier.

NOTES:

• When a control cable is connected to the player's CONTROL IN

jack, direct control of the player with the remote control unit is

not possible. Operate the player with the remote control unit

by aiming it at the ampfifier.

• Be sure to connect both of the control cable's plugs securely to

the CONTROL IN and CONTROL OUT jacks. Do not connect

only one end of the cable.

• Be sure to turn off the power of the ampfifier before connecting

the power cord and output cable.

CD-Deck synchro function

If you have a Pioneer cassette deck provided with the CD-Deck

synchro function, connect the CD-DECK SYNCHRO jacks of the

CD player and cassette deck. With this function, synchro recording

can be carried out between player and deck.

• For details on connections and operation, refer to the operating

instructions supplied with the cassette deck.

• The CD-DECK SYNCHRO cable is not supplied with the CD

player.

• When the CD-Deck synchro recording is carried out on several

discs, use the program playback function. (Refer to page 15 for

details of program playback.)