Installation Manual

Using the function menu
1 Display the “Function Menu” screen.
= For details of the operation, refer to Display-
ing the “Function Menu” screen on page
77.
2 Turn MULTI-CONTROL to select a func-
tion.
Turning MULTI-CONTROL switches between
the functions in the following order:
Function1 (function 1) — Function2 (function
2) — Function3 (function 3) — Function4
(function 4) — Auto/Manual (auto/man-
ual)
Operate the external unit
by using “Function1 ”—
“Function4”
The external unit can be operated by transmit-
ting the operating commands set to
“Function1” through “Function4”.
1 Display the “Function Menu” screen.
= For details of the operation, refer to Display-
ing the “Function Menu” screen on page
77.
2 Turn MULTI-CONTROL until the desired
setting appears in the display.
3 Press the center of MULTI-CONTROL to
set.
p The operating commands set to
“Function1” through “Function4” vary de-
pending on the external unit.
p Some functions may not be used until you
touch and hold the key.
Switches between automatic
and manual function
1 Display the “Function Menu” screen.
= For details of the operation, refer to Display-
ing the “Function Menu” screen on page
77.
2 Turn MULTI-CONTROL until “Auto/Man-
ual” appears in the display.
3 Pressing the center of MULTI-CONTROL
switches between “Auto” and “Manual”.
p Operating commands set for “Auto” and
“Manual” operations vary depending on
the external unit connected.
En
109
English
Chapter
24
Using the external unit (EXT1, EXT2)