User manual

4
4
15
iPod/iPhone playback
Merely by connecting your iPod/iPhone to this unit, you can
enjoy high-quality sound from your iPod/iPhone.
Playback for iPod/iPhone music can be performed from this
unit or the iPod/iPhone itself.
Confirming what iPod/iPhone models are
supported
The iPod/iPhone playable on this unit are shown below.
Note
• USB works with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s,
iPhone 4, iPhone 3GS, iPod touch (1st through 5th
generation) and iPod nano (3rd through 7th generation).
However, some of the functions may be restricted for some
models.
• This unit has been developed and tested for the software
version of iPod/iPhone indicated on the website of Pioneer
(http://pioneer.jp/homeav/support/ios/eu/).
• Installing software versions other than indicated on the
website of Pioneer to your iPod/iPhone may result in
incompatibility with this unit.
• Features such as the equalizer of iPod/iPhone cannot be
controlled using this unit, and we recommend switching
the equalizer off before connecting.
1
Select “Settings” from the top menu.
You can confirm your software version by operating your
iPod/iPhone. When using iPod touch or iPhone, select
“General” after selecting “Settings”.
2
Select “About”.
The software version will be displayed.
Connect iPod/iPhone to the USB terminal
Connect your iPod/iPhone to the USB terminal on the unit’s
front panel. Use the iPod cable supplied with your iPod/
iPhone for the connection.
• For the cable connection, also refer to the operating
instructions for your iPod/iPhone.
Playing your iPod/iPhone
CAUTION
• When your iPod/iPhone is connected to this unit and you
wish to operate the iPod/iPhone directly, be sure to hold the
iPod/iPhone steady with the other hand to prevent
malfunctions due to faulty contacts.
1
Connect your iPod/iPhone.
To connect your iPod/iPhone, see Connect iPod/iPhone to
the USB terminal on page 15.
2
Press iPod/USB FRONT or iPod/USB REAR to select iPod/
USB as the input source.
iPod/USB Front or iPod/USB Rear is shown on the
display and starts playback.
Note
• When the iPod/iPhone is connected to this unit, the
playback information for the songs are displayed on the
iPod/iPhone display. Pressing iPod CONTROL button on
the remote will switch the display and display the
information on the front panel of the unit.
iPod/iPhone Audio Control
iPod nano 3G/4G/5G/6G/7G 
iPod touch 1G/2G/3G/4G/5G 
iPhone 3GS 
iPhone 4 
iPhone 4s 
iPhone 5 
iPhone 5c 
iPhone 5s 
/I STANDBY/ON
STANDBY DIRECT Hi-Bit 32
Up Sampling
iPod/iPhone
5V
1A
Front panel
USB cable included with
the iPod/iPhone
iPod/iPhone
LAN (10/100)
OPTICAL COAXIAL
12
OPTICAL COAXIAL
5V 1A
DC OUTPUT
For
(5V 0.6A MAX)
WIRELESS
LAN
iPod/iPhone
CONTROL
OUT
DIGITAL IN
DIGITAL IN
DIGITAL OUT
USB DAC

Rear panel
USB cable included with
the iPod/iPhone
iPod/iPhone