N-70A-K/-S N-50A-K/-S NETWORK AUDIO PLAYER Discover the benefits of registering your product online at http://www.pioneer.co.uk (or http://www.pioneer.eu).
CAUTION WARNING VENTILATION CAUTION TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.
POWER-CORD CAUTION Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock.
Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. Before you start About this product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Checking what’s in the box. . . . . . . . . . . . . . . . . . . . . . . . . Loading the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating range of remote control . . . . . . . . . . . . . . . . . . .
Before you start About this product Loading the batteries This operating Instructions uses simplified illustrations of the product. Everything as shown in this operating Instructions may differ from the actual display on the product. NETWORK AUDIO PLAYER /I STANDBY/ON SOURCE STANDBY DIRECT Hi-Bit 32 Operating range of remote control The remote has a range of about 7 m at an angle of about 30° from the remote sensor.
1 Controls and displays 8 Front panel 1 2 3 4 6 5 7 8 9 10 NETWORK AUDIO PLAYER /I STANDBY/ON SOURCE STANDBY DIRECT Hi-Bit 32 N-50A Up Sampling 5V 1A iPod/iPhone N-50A Press to stop playback. 9 Press to start playback. During playback, pause/unpause playback. 10 Press to return to the beginning of the currently playing file. Hold down to fast-rewind.
1 Controls and displays 9 Play bar Display 1 2 Music Server DIGITAL OUT Displays the status of file playback. May not be displayed depending on the input or the file. 10 Repeat and Shuffle 3 Repeat all files. 1 Song 1 4 FLAC 176.4kHz / 24bit 6 7 Shuffle Artist Album 5 11 SOUND feature indicator 8 3:45 / -5:23 L.R.A A S R A.L.C 9 Repeat a file. 10 L.R.A Displayed when the Lock Range Adjust setting is set to anything other than Range 7 (Initial setting).
1 Controls and displays 3 Hi-Bit 32 Remote control 1 STANDBY/ON 2 DIRECT Hi-Bit32 Up Sampling 3 A.S.R A.L.
2 Connecting your equipment CAUTION • Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. • Connect the power cord after all the connections between devices have been completed. N-50A Analog audio output connections By connecting this unit’s analog audio output to the analog audio input of an amplifier, you can use the amplifier to enjoy analog audio produced from this unit.
2 Connecting your equipment Digital audio input connections Digital audio connections Digital audio output connections By connecting this unit’s digital audio output to the digital audio input of an AV receiver or D/A converter, etc, you can use the amplifier to enjoy digital audio produced from this unit. By connecting a digital audio component’s audio output to this unit’s digital audio input, this unit can be used as a D/A converter.
2 Connecting your equipment Using a USB cable to connect to a computer By using a USB cable (sold separately) to connect this unit’s USB DAC port to the USB port on a computer, this unit can be used as a D/A converter. For details regarding the output of signals input to the USB DAC port, see section Playing music from a computer on page 30. Note • When using this connection to input audio files from a computer to this unit, it may be necessary to install a special driver on the computer.
2 Connecting your equipment Connecting using wireless LAN Wireless connection to the network is possible through a wireless LAN connection. Use the separately sold wireless LAN converter (Pioneer Model No. AS-WL300) for connection. Internet DIGITAL OUT DIGITAL IN 2 OPTICAL COAXIAL OPTICAL LAN (10/100) DC OUTPUT CONTROL For OUT WIRELESS LAN (5V 1 COAXIAL DIGITAL IN iPod/iPhone 5V 0.
2 Connecting your equipment Plugging in Important • Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. CAUTION • Do not use any power cord other than the one supplied with this unit. • Do not use the supplied power cord for any purpose other than that described below. After you’ve finished making all connections, plug the unit into an AC outlet.
3 Getting started Setting the unit Auto power off setting General control When you use the unit for the first time, the following screens will be displayed. Set up the following items to customize the unit. Power to the unit will turn off automatically if no controls are performed for the set period of time. • The factory default setting is 15 min. Input function 1 Setting auto power off Press /I STANDBY/ON. The power indicator flashes slowly.
4 iPod/iPhone playback Merely by connecting your iPod/iPhone to this unit, you can enjoy high-quality sound from your iPod/iPhone. Playback for iPod/iPhone music can be performed from this unit or the iPod/iPhone itself. Confirming what iPod/iPhone models are supported The iPod/iPhone playable on this unit are shown below.
4 iPod/iPhone playback Important • If this unit cannot play your iPod/iPhone, perform the following troubleshooting checks: - Check whether the iPod/iPhone is supported by this unit (page 15). - Reconnect the iPod/iPhone to the unit. If this doesn’t seem to work, try resetting your iPod/iPhone. - Check the iPod/iPhone software is supported by this unit. • If the iPod/iPhone cannot be operated, check the following items: - Is the iPod/iPhone connected correctly? Reconnect the iPod/iPhone to the unit.
5 USB/External HDD playback Playing files stored on USB storage devices This unit may not recognize a USB storage device/External HDD, play files or supply power to a USB storage device/ External HDD. For details, see Connecting USB storage devices on page 10. Pioneer does not guarantee that any file recorded on a USB storage device/External HDD will play or that power will be supplied to a USB storage device/External HDD.
6 Network quick setup guide By connecting this unit to the network via the LAN interface, you can play back audio files stored on components on the network, including your computer, and listen to Internet radio stations. 3. 1 Connect to the network • This section will explain about performing basic network settings. • The factory default setting is DHCP On. 1. Connect the unit and the router using a LAN cable. Modem Router 2 DIGITAL OUT The power to the unit will be turned on.
6 Network quick setup guide Try using network functions Enjoy listening to music using the following functions when preparations are completed. 1 Listen to the Internet radio. (page 20) 2 Listen to music using AirPlay. (page 20) - Listen to music on an iPhone, iPod touch or iPad using AirPlay. - Listen to music on a computer using AirPlay. 3 Listen to music on a computer or NAS (network attached storage). (page 22) - Shared settings with Windows Media Player. - Shared settings with NAS.
6 Network quick setup guide 1 Listen to the Internet radio. Press the NET SERVICE button. STANDBY/ON Use / and the ENTER button to select a station. Using a computer Internet Radio 1 All Stations DISPLAY 2 Listen to music using AirPlay. 1 3 Connect a computer with iTunes 10.2.2 or higher installed to the same router as this unit. 07Rock Hi-Bit32 Up Sampling A.S.R A.L.C SOUND iPod/USB FRONT iPod/USB REAR iPod CONTROL MUSIC SERVER NET SERVICE FAVORITES 1.
6 3 Network quick setup guide Start iTunes, click the AirPlay mark, and then select this unit. Using an iPhone, iPod touch or iPad 1 Connect an iPhone, iPod touch or iPad (iOS version 4.3.3 or higher) to the same router as this unit. Internet Note • The displayed name will change depending on the product being used. N-70A or N-50A will be displayed. The above image is an example using iTunes Version 11. Exact controls will differ depending on the version of iTunes that you use.
6 5 Network quick setup guide 7 Tap (touch) AirPlay. Select a track and play it. Swipe (slide) and hide display of the Control Center. Playback will begin through this unit. 3 Listen to music on a computer or NAS (network attached storage). 1 Press the STANDBY/ON button. The power to the unit will be turned on. STANDBY/ON N-70A ***** 6 Once the name of this unit is displayed, select it. 2 DISPLAY DIRECT Hi-Bit32 Up Sampling A.S.R A.L.
6 Network quick setup guide Using a NAS that supports DLNA 1 From the product name’s dropdown list, select “Permitted” and then press “OK”. • Network and internet Change NAS settings to allow access to NAS. Refer to the user manual of your NAS for more details. Using a computer with Windows Media Player 12 installed N-70A 1 Perform share settings for media stored on the computer. • Control panel 2 Press the MUSIC SERVER button.
6 4 Network quick setup guide Use / and the ENTER button to select a track. is displayed. the unit. Music Server 1 Server 1 Install the Pioneer ControlApp. Using an iPhone/iPod touch xxxxxx Access the App Store and install the Pioneer ControlApp. xxxxxx Using an Android Device xxxxxx xxxxxx Access Google Play and install the Pioneer ControlApp. 5 Confirm that the Wi-Fi operation mark 4 Use the Pioneer ControlApp to operate 2 Playback will begin. Press the STANDBY/ON button.
7 Perform network settings Network setting If a broadband router (with built-in DHCP server function) is connected to this unit, you can simply turn on the DHCP server function without having to set up the network manually. Before you set up the network, consult with your ISP or the network manager for the required settings. It is advised that you also refer to the operation manual supplied with your network component.
7 Perform network settings Setting the network standby function Listening to the Internet radio Tune into a station Allows power to the unit be turned on using the Pioneer ControlApp even when the unit is in standby mode. It also allows the unit to power on automatically using AirPlay and DLNA. Follow the steps below to turn on network standby. Power consumption increases when set to network standby when compared to regular standby mode. • The factory default setting is Off.
7 Perform network settings Advanced operations for the Internet radio Registering broadcast stations not on the vTuner list from the special Pioneer site With this unit, broadcast stations not included on the list of stations distributed by vTuner can be registered and played. Check the access code required for registration on this unit, use this access code to access the special Pioneer Internet radio site and register the desired broadcast stations in your favorites.
7 Perform network settings • When this unit is selected with the Spotify application, the account information is registered on this unit as well. When disposing of this unit, reset this unit’s settings in order to delete the account information registered on this unit. For instructions on resetting, see Resetting this unit on page 36. Use the unit to listen to Spotify audio stream 1 Press NET SERVICE repeatedly to select Spotify as the input source. Spotify is shown on the display.
7 Perform network settings • There are cases where the time elapsed may not be correctly displayed. 1 Press MUSIC SERVER to select Music Server. All available servers are shown on the display. “Please wait” will be displayed until an available server is found. • Check your network environment if “Please wait” continues to be displayed. If your DLNA compatible digital media server supports the Scan function. Press and hold the button or button to Fast Forward or Rewind.
8 Using other functions Using the Sound mode For greatest fidelity to the original sound This function allows you to utilize various sound modes during playback. • This function cannot be used when the DIRECT mode is on. • Digital audio will not be output when DIRECT mode is off. The DIRECT mode allows audio signals to be played via the shortest playback circuit without passing through the DSP, thus reducing noise and producing playback sound with greatest fidelity to the original.
8 Using other functions Adjust the DAC lock range (N-70A only) Switch digital filter (N-70A only) Use this function to make fine adjustments in the pursuit of higher audio quality. Even using clock input with the same jitter, incidental noise can be reduced and overall sound quality increased by narrowing the lock range. However, if you set the lock range too narrow, then an input signal with severe jitter may release the lock and interrupt the audio or generate noise.
9 Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
9 corresponding information again. Check whether the connection status is set to “Do not authorize”. There are no playable audio files on the component connected to the network. Check the audio files stored on the component connected to the network. Wireless Accessory Configuration fails. If the iOS device is not connected via Wi-Fi, connect the iOS device via Wi-Fi. If the iOS device and router are connected via 5 GHz, change the connection between the iOS device and router to 2.
9 11 an application such as Pioneer ControlApp, the volume can also be increased from the application. Playback continues on this unit when the Spotify application is quit. The Spotify audio stream continues from this unit, even when the Spotify application is quit. To operate again, relaunch the Spotify application. Cannot perform gapless playback. Confirm that the conditions for gapless playback have been met (page 39). Wireless LAN Network cannot be accessed via wireless LAN.
9 If the audio output on your OS set to mute? Check the settings on your computer and turn off the mute setting. Are you running multiple applications at the same time? Close the applications that you are not using. The OS or application audio output destination is not set up correctly. Select “Pioneer N-70A N-50A USB Audio” for Sound Device. Additional information Firmware Update Firmware Update messages Use this procedure to update the unit’s software.
9 11 Note • Confirm the unit’s IP address as follows: 1. Press NET SERVICE SETUP. 2. Select System Info. 3. Confirm the IP field. 4 Additional information 6 Click Network Setup Firmware Update. Browse the latest firmware on your computer (a) and then press Upload (b). The confirmation screen is displayed. If you continue the firmware update, press Yes. Once the firmware update process starts, you can’t stop it.
9 Do not place objects on this unit. Additional information DLNA Do not place any objects on top of this unit. Do not expose to heat. Do not place this unit on top of an amplifier or other component that generates heat. When rack mounting it, to avoid the heat given off by the amplifier or other audio component, place it on a shelf below the amplifier. Cleaning the product • Unplug the power cord from the power outlet when cleaning this unit. • Clean this unit using a soft cloth.
9 11 Additional information Authorizing this unit FLAC In order to be able to play with Music Server, this unit must be authorized. This happens automatically when the unit makes a connection over the network to the computer. If not, please authorize this unit manually on the computer. The authorization (or permission) method for access varies depending on the type of server currently being connected. For more information on authorizing this unit, refer to the instruction manual of your server.
9 Additional information Category Extension Stream WAV WMA AAC .wav .wma .m4a .aac .3gp .3g2 Apple .m4a Lossles .mp4 s LPCM WMA2/7/ 8/9b MPEG-4 AAC MPEG-4 HE AAC (aacPlus v1/2) ALAC Gapless playback Category Extension Stream Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz Quantization bitrate 16 bit, 24 bit Channel 2 ch Sampling frequency 32 kHz, 44.
9 11 Additional information The USB-DAC function of this unit supports the following file formats. Note that some file formats are not available for playback although they are listed as playable file formats. N-70A Windows 8 About iPod/iPhone This product is Windows 8.1 Compatible and Windows 8 Compatible. Category Extension Stream LPCM DSD LPCM DSD Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.
9 Additional information About Spotify Specifications The Spotify software is subject to third party licenses found by the following procedures. Analog audio output 1 Be sure this unit and your computer are connected to the same wired or wireless network. 2 3 Launch Web browser on your computer. Enter “http://(the unit’s IP address)/notice.html” into your web browser's address bar. Note • Confirm the unit’s IP address as follows: 1. Press NET SERVICE SETUP. 2. Select System Info. 3.
http://www.pioneer.co.uk http://www.pioneer.eu © 2014 PIONEER HOME ELECTRONICS CORPORATION. All rights reserved. PIONEER HOME ELECTRONICS CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.
