English MARINE DIGITAL MEDIA RECEIVER RÉCEPTEUR MEDIA AUDIO MARIN RECEPTOR DE MEDIOS DIGITALES MARINO Français Operation Manual Mode d’emploi Manual de operación Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. Important (Numéro de série) Le numéro de série se trouve au bas de cet appareil.
Table of Contents Getting Started ........................................................................................ 3 Radio .......................................................................................................... 7 Bluetooth ............................................................................................... 10 Pandora® ................................................................................................ 14 Spotify® .............................................
Getting Started Basic operation (navigation)/LIST USB port M.C. (multi-control) dial SRC (source)/OFF DISP (display) BASS BAND/ Detach button Display window AUX input jack (3.5 mm stereo jack) Optional remote control The marine wired remote control CD-ME300 is sold separately. Frequently used operations Purpose Operation Turn on the power* Press SRC/OFF to turn on the power. Press and hold SRC/OFF to turn off the power. Adjust the volume Turn the M.C. dial.
Purpose Operation Ending a call Press Boost the bass level Press BASS. • You can select the bass level ([HI] or [LOW]) in [D.BASS] (page 24). . Display indication Indication Description Appears when a lower tier of the menu or folder exists. BASS Appears when the BASS function is activated. Appears when random/shuffle play is set (except when BT AUDIO is selected as the source). Appears when repeat play is set (except when BT AUDIO is selected as the source).
Resetting the microprocessor The microprocessor must be reset in the following situations: – Before using this unit for the first time after installation – If the unit fails to operate properly – When strange or incorrect messages appear on the display Remove the front panel (page 4). Press the RESET button with a pointed instrument longer than 8 mm. RESET button Setup menu When you turn the ignition switch to ON after installation, the setup menu appears in the display.
2 3 [QUIT :YES] appears. To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO], then press to confirm. Press the M.C. dial to confirm the settings. NOTE Canceling the demonstration display (DEMO OFF) 1 2 3 4 Press the M.C. dial to display the main menu. Turn the M.C. dial to select [SYSTEM], then press to confirm. Turn the M.C. dial to select [DEMO OFF], then press to confirm. Turn the M.C. dial to select [YES], then press to confirm.
Menu Item Description SYSTEM UPDATE Select [SYSTEM INFO] to confirm the latest system information [SYSTEM INFO], [S/ on the unit. Select [S/W UPDATE] to update the unit to the latest software W UPDATE] and initialize the unit settings. For details on the latest software and updating, visit our website. [YES], [NO] Select [YES] to initialize the unit settings. The unit will be restarted automatically. Radio The tuner frequencies on this unit are allocated for use in North America.
NOTE [SEEK] needs to be set to [MAN] in the FUNCTION settings (page 22). To store stations manually 1 While receiving the station you want to store, press and hold one of the number to 6/ ) until it stops flashing. USB/iPhone®/AUX (iPhone source is not available when [USB MTP] is set to [ON] in the SYSTEM settings (page 27).) Playing back Disconnect headphones from the device before connecting it to the unit. USB devices (including Android™)/iPhone 1 Open the USB port cover.
MTP connection A device installed with Android OS 4.0 or most of later versions can be connected to the unit via MTP, using the cable supplied with the device. However, depending on the connected device, OS version or the numbers of the files in the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is not compatible with WAV file formats and FLAC file formats, and cannot be used with the MIXTRAX function.
Purpose Operation Return to root folder (USB only)*1 Press and hold 1/ . *1 Compressed audio files only *2 When you use the fast forward or reverse function while playing a VBR file, the playback time may be not correct. NOTES • iPhone needs to be connected with Pioneer Smart Sync via USB for using this function (page 17). • Depending on the file/song, sound effects may not be available. 1 Press 3/MIX to turn MIXTRAX on/off.
4 5 Select the unit name shown in the device display. Make sure the same 6-digit number appears on this unit and the device, then select [YES] if the 6-digit numbers displayed on this unit and the device are the same. Important • Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running can drain the boat’s battery. • Be sure to stop your boat in a safe place. To make a phone call 1 Press to display the phone menu.
Purpose Operation Switch between the current caller and a caller on hold Press the M.C. dial. Press and hold Adjust the volume of the caller’s voice (When private mode is on, this function is not available.) Turn the M.C. dial during the call. . Turn the private mode on or off Press BAND/ English Cancel a caller on hold during the call. To preset phone numbers 1 Select a phone number from a phone book or call history. 2 Press and hold one of the number buttons (1/ to 6/ ).
Description PHONE BOOK Display the contacts in your phone. PRESET 1-6 Recall the preset phone numbers. You can also recall the preset phone numbers by pressing one of the number buttons (1/ to 6/ ). A.ANSR* Select [ON] to answer an incoming call automatically. [ON], [OFF] PB INVT Invert the order of names in the phone book (name view). DEVICELIST Display the list of paired Bluetooth devices. “*” appears on the device name when the Bluetooth connection is established.
TIP When more than two and up to five devices are registered to the unit via Bluetooth, you can switch the Bluetooth device by playing back songs on the device. By doing so, playing back a song from the Bluetooth device of each passenger is easily available. However, depending on the usage conditions, multiple connections may not be available and the audio files/songs may not be able to be played back properly. English Basic operations You can make various adjustments in the FUNCTION settings (page 22).
2 3 4 Press and hold 1/ to display [APP CONTROL]. Turn the M.C. dial to select one of the below. • Select [WIRED] for the USB connection. • Select [BLUETOOTH] for the Bluetooth connection. Press SRC/OFF to select [PANDORA]. Launch the Pandora application on the mobile device and start playback. NOTE When you connect a mobile device other than an iPhone/Android device, it may not operate correctly depending on your mobile device.
Purpose Operation Store the track information currently 1 Press and hold 3/MIX. being played in your Pandora [BOOKMARK] appears. account. 2 Press the M.C. dial. NOTE Spotify® (Not available when [USB MTP] is set to [ON] in the SYSTEM settings (page 27).) Spotify is a music streaming distribution service not affiliated with Pioneer. More information is available at http://www.spotify.com. The Spotify application is available for compatible smartphones, please visit https:// support.spotify.
NOTE When you connect a mobile device other than an iPhone/Android device, it may not operate correctly depending on your mobile device. Basic operations You can make various adjustments in the FUNCTION settings (page 22). The available operations may vary according to the type of contents (track/album/artist/playlist/radio) you want to play. Purpose Operation Skip a track Press Search for a track from a list 1 Press and hold to display the list. 2 Turn the M.C.
For details on what operations are available on the application, see the application’s help section. NOTE The APP source is not available when a Pioneer Smart Sync connection is not made or [USB MTP] is set to [ON] in the SYSTEM settings (page 27). For iPhone users This function is compatible with iOS 10.3 or later. You can download Pioneer Smart Sync on iTunes App Store. For Android device users This function is compatible with devices that have Android OS 5.0 or later installed.
Image (example): English Examples: – Selecting a source of the unit – Listening to the music on your iPhone/Android device – Controlling the sound field intuitively – Controlling your connected Bluetooth device Extending the functions of the unit by using the application The following functions, which are unavailable on the unit alone, are available by making a Pioneer Smart Sync connection.
1 2 3 4 5 6 7 Press the M.C. dial to display the main menu. Turn the M.C. dial to select [SYSTEM], then press to confirm. Turn the M.C. dial to select [APP CONTROL], then press to confirm. Turn the M.C. dial to select one of the below. • Select [WIRED] for the USB connection. • Select [BLUETOOTH] for the Bluetooth connection. Turn the M.C. dial to select [AUTO APP CONN], then press to confirm. Turn the M.C. dial to select [ON], then press to confirm. Connect this unit with the mobile device.
Audio Adjustments You can also make various adjustments in the AUDIO settings (page 23). You can adjust the cut-off frequency value and the slope value of each speaker. The following speakers can be adjusted. [FRONT], [REAR], [SUBWOOFER] NOTE [SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 23). 1 2 3 4 5 6 7 Press the M.C. dial to display the main menu. Turn the M.C. dial to select [AUDIO], then press to confirm. Turn the M.C. dial to select [CROSSOVER], then press to confirm.
3 • FUNCTION settings (page 22) • AUDIO settings (page 23) • SYSTEM settings (page 25) • ILLUMINATION settings (page 28) • MIXTRAX settings (page 28) Turn the M.C. dial to select the options, then press to confirm. English FUNCTION settings The menu items vary according to the source. Menu Item Description BSM Store the six strongest stations on the number buttons (1/ to 6/ ) automatically.
Menu Item Description PLAY Start playback. STOP AUDIO settings NOTE [CHK APP SETTG.] may be displayed when the setting is performed from Pioneer Smart Sync. Menu Item Description EQ SETTING [SUPER BASS], [POWERFUL], Select or customize the equalizer curve.
Menu Item Description SPEAKER LEVEL Types of speaker: [FRONT L], [FRONT R], [REAR L], [REAR R], [SUBWOOFER] Output level: [–24] to [10] Select a speaker unit (filter) and adjust the output level. • Each value you have adjusted changes when you change the [POSITION] setting (page 24). Select a speaker unit (filter) to adjust the HPF or LPF cut-off frequency and the slope for each speaker unit. For details on the [CROSSOVER] setting, see page 21.
Menu Item Description LOUDNESS [OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume. [+4] to [–4] Adjust the volume level for each source except FM. Each of the below combinations are set to the same setting automatically. • When making a USB connection, set USB, iPhone, PANDORA, APP, and SPOTIFY. • When making a Bluetooth connection, set BT AUDIO, iPhone, PANDORA, APP, and SPOTIFY. SLA [1] (effective for low compression Enhance compressed audio and restore rich rates), sound.
Menu Item Description INFO DISPLAY Display the item on the sub information display. • When [SOURCE/SPEANA] or [CLOCK/SPEANA] is selected, display the antenna instead of the speana on the radio source. [ON], [OFF] Set to [ON] when using an auxiliary device connected to the unit. AUX BT AUDIO [ON], [OFF] Set the Bluetooth signal on/off. PANDORA [ON], [OFF] Set to [ON] when using the Pandora function. SPOTIFY [ON], [OFF] Set to [ON] when using the Spotify function.
Menu Item Description USB MTP [ON], [OFF] AUTO APP CONN [ON], [OFF] Select [ON] to automatically launch Pioneer Smart Sync when the iPhone/Android device is connected to the unit. USB AUTO [ON], [OFF] Select [ON] to automatically switch to USB source when a USB device/iPhone is connected to the unit. Select [OFF] when a USB device/iPhone is being connected to the unit just for charging.
ILLUMINATION settings Menu Item Description DIM SETTING [SYNC CLOCK], [MANUAL] Select the way to change the display brightness. [1] to [10] Change the display brightness. The available setting ranges differ depending on [DIM SETTING]. MIXTRAX settings Menu Item Description SHORT PLAYBCK [1.0 MIN], [1.5 MIN], [2.0 MIN], [2.5 MIN], [3.0 MIN], [OFF] Select the length of the playback time. MIX PATTERN [SOUND LEVEL] Change the MIXTRAX special effects according to the audio level.
Additional Information – Make a Bluetooth connection between the unit and the cellular phone again. Troubleshooting Error messages Common The repeat play range changes unexpectedly. → Depending on the repeat play range, the selected range may change when another folder or track is being selected or during fast forwarding/reversing. – Select the repeat play range again. A subfolder is not played back. → Subfolders cannot be played when [FLD] (folder repeat) is selected. – Select another repeat play range.
ERROR-23 → USB device was not formatted properly. – Format the USB device with FAT12, FAT16 or FAT32. PROTECT → All the files on the connected USB device are embedded with DRM. – Replace the USB device. ERROR-16 → The iPhone firmware version is old. – Update the iPhone version. → iPhone failure. – Disconnect the cable from the iPhone. Once the iPhone’s main menu is displayed, reconnect the iPhone and reset it. N/A USB → The connected USB device is not supported by this unit.
Pandora – Wait until Pandora allows you to skip again. NOT FOUND → The Pandora application has not started running yet. – Start up the Pandora application. RATING ERROR → The thumb rating operation was disabled. – Run the same command for another track. UPDATE APP → This version of the Pandora application is not supported. – Connect a device that has a compatible version of the Pandora application installed. LOG IN ERROR → Your Pandora account is not logged in.
NO BT DEVICE GO TO BT MENU TO REGISTER → No Bluetooth device found. – Connect the unit and the device via Bluetooth (page 10). STATION LIMIT → A new station cannot be added. – Delete an old station to open a spot for a new one. CONN. FAILED PRESS BAND KEY TO RETRY → Bluetooth connection failed. – Press BAND/ to make a connection again. CANNOT DELETE → The station could not be deleted. – Run the same command for another station.
– The device may cause audible interference when you are listening to the radio. Windows Media™ Audio Professional, Lossless, Voice/DRM Stream/Stream with video iPhone • Do not leave the iPhone in places with high temperatures. • Firmly secure the iPhone when driving. • Incompatible text saved on the iPhone will not be displayed by the unit. MP3 files Sampling frequency • Only the first 32 characters can be displayed as a file name (including the file extension) or a folder name.
• FLAC file formats cannot be connected via MTP. • FLAC files may not be playable, depending on the encoder. File extension Sampling frequency Quantization bit rate Channel mode .flac, .fla 8/11.025/12/16/22.05/ 24/32/44.1/48/96 kHz 8/16/24 bit 1/2 ch USB device • There may be a slight delay when starting playback of audio files on a USB storage device with numerous folder hierarchies. Playable folder hierarchy Up to eight tiers (A practical hierarchy is less than two tiers.
Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners. WMA Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc. FLAC Copyright © 2000-2009 Josh Coalson Copyright © 2011-2014 Xiph.
Google™, Google Play, Android Google, Google Play and Android are trademarks of Google LLC. MIXTRAX MIXTRAX is a trademark of the PIONEER CORPORATION. Spotify® SPOTIFY and the Spotify logo are among the registered trademarks of Spotify AB. Compatible mobile digital devices and premium subscription required, where available, see https://www.spotify.com. T-Kernel 2.0 This product uses the source code of TKernel 2.0 under T-License 2.0 granted by T-Engine Forum (www.tron.org).
Time alignment: 0 Inch to 140 Inch (1 inch/Step) USB CEA2006 Specifications Power output: 14 W RMS × 4 Channels (4 Ω and < = 1 % THD+N) S/N ratio: 91 dBA (reference: 1 W into 4 Ω) NOTE Specifications and the design are subject to modifications without notice. FM tuner Frequency range: 87.9 MHz to 107.9 MHz Usable sensitivity: 11 dBf (1.
© 2019 PIONEER CORPORATION. All rights reserved. © 2019 PIONEER CORPORATION. Tous droits de reproduction et de traduction réservés.
P1or,eer Installation Manual Manuel d’installation Manual de instalación
TWO 6-1/2” MARINE FULL RANGE SPEAKERS DEUX HAUT-PARLEURS MARINS DE 6.
Visit our website / Visitez notre site Web / Visite nuestro sitio Web Register your product at Enregistrez votre produit au Registre su producto en http://www.pioneerelectronics.com in Canada au Canada en Canada http://www.pioneerelectronics.ca - Learn about product updates (such as firmware updates) for your product. - Register your product to receive notices about product updates and to safeguard purchase details in our files in the event of loss or theft.
English Consult your dealer on method of installation. A Speaker installation WARNING This product contains chemicals known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. Wash hands after handling. A 1 Determine the location of the speaker as illustrated. ф 175 mm (6-7/8 in. Dia.) ф 130 mm (5-1/8 in. Dia.) 28.5 mm (1-1/8 in.) 56 mm (2-1/4 in.) Front A B C D E ф 156 mm (6-1/8 in. Dia.) ф 142 mm (5-5/8 in. Dia.) 8- ф 4.
PIONEER CORPORATION 28-8, Honkomagome 2-chome, Bunkyo-ku , Tokyo 113-0021, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (O) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 2 Jalan Kilang Barat, #07-01 , Singapore 159346 TEL: 65-6378-7888 PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
