User Manual

English
- 87 -
[Off] The volume does not change.
[Source Level Adjuster]
[-4] to [+4]
Adjust the volume level of each source to prevent radical
changes in volume when switching between sources other
than FM.
Touch or to adjust the source volume after
comparing the FM tuner volume level with the level of the
so
urce.
TIP
If you directly touch the area where the cursor can be moved, the
SLA (source level adjustment) setting will be changed to the value
of the touched point.
NOTES
• Settings are based on the FM tuner volume level, which remains
unchanged.
• This function is not available when the FM tuner is selected as
the AV source.
• This function is available only for the currently selected source.
[Subwoofer]
[On] [Off]
Select enable or disable rear subwoofer output from this
product.
[Speaker Level]
Listening position*1*2
[Off] [Front-L] [Front-R]
[F
ront] [All]
Standard Mode*3
[Front Left] [Front Right]
[Re
ar Left] [Rear Right]
[Subwoofer]
Network Mode*3
[High Left] [High Right]
[M
id Left] [Mid Right]
[Subwoofer]
Speaker output level
[-24] to [10]
Adjust the speaker output level of the listening position.
1 To
uc h or to select the listening position then
select the output speaker.
2 To
uc h or to adjust the selected speaker output
level.
NOTE
This function is available when [Subwoofer] is set to [On].
[Crossover]*4 Select a speaker unit (filter) to adjust the HPF or LPF cutoff
frequency and the slope for each speaker unit (page 91)
.
[Subwoofer Settings]*4 Select the subwoofer phase (page 91).
[Listening Position]*1
[Off] [Front Left] [Front
R
ight] [Front] [All]
Select a listening position that you want to make as the
center of sound effects.
Menu Item Description