RDS AV RECEIVER Operation Manual Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Contents ■ Bluetooth ......................... 20 Bluetooth connection .............................................. Bluetooth settings..................................................... Switching the connected Bluetooth device .... Hands-free phoning.................................................. Bluetooth audio ......................................................... 20 20 21 22 27 Using AppRadio Mode +......................................... Starting procedure..................................
Basic operation ........................................................... 50 ■ Pandora®.......................... 54 Video settings ............................................................. 92 Listening to Pandora................................................. 54 Basic operation ........................................................... 55 Creating a shortcut ................................................... 93 Selecting a shortcut..................................................
Using app-based connected content .............. Pandora®..................................................................... Spotify® ....................................................................... Notice regarding video viewing ........................ Notice regarding MP3 file usage ....................... Using the LCD screen correctly .......................... Specifications............................................................
Precaution Information to user –This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. –Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment. –NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
CAUTION This product is evaluated in moderate and tropical climate condition under the Audio, video and similar electronic apparatus - Safety requirements, IEC 60065. The Safety of Your Ears is in Your Hands ▶ESTABLISH A SAFE LEVEL: – Set your volume control at a low setting. – Slowly increase the sound until you can hear it comfortably and clearly, without distortion. – Once you have established a comfortable sound level, set the dial and leave it there.
Parking brake interlock Certain functions (such as viewing of video image and certain touch panel key operations) offered by this product could be dangerous (possibly resulting in serious injury or death) and/or unlawful if used while driving. To prevent such functions from being used while the vehicle is in motion, there is an interlock system that senses when the parking brake is set and when the vehicle is moving.
• Do not take any steps to tamper with or disable the parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or death. • To avoid the risk of damage and injury and the potential violation of applicable laws, this product is not for use with a video image that is visible to the driver.
Handling the USB connector CAUTION Failure to operate After-sales service for Pioneer products Please contact the dealer or distributor from which you purchased the product for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below. Please do not ship your product to the companies at the addresses listed below for repair without making advance contact.
• To protect the LCD screen from damage, be sure to touch the touch panel keys only with your finger and do so gently. Notes on internal memory About this manual This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used. Meanings of symbols used in this manual 0000NEX This indicates model names that are supported by the described operations.
Parts and controls Main unit English 2400NEX 2300NEX 1400NEX NOTE For MVH-2400NEX/MVH-2300NEX, press buttons on the main unit, and for MVH-1400NEX, touch buttons on the main unit.
Press (touch) to switch between the Application screen and the AV operation screen. For MVH-2400NEX/MVH-2300NEX, press and hold to switch to the camera view mode, and for MVH-1400NEX, touch and hold to turn off the display. RESET Remote Control 2400NEX 2300NEX Volume (+/-) MODE SRC TOP MENU MENU Thumb pad MUTE Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode.
AUDIO SUBTITLE ANGLE BAND/ESC RETURN or FOLDER/P.CH Press to select the tuner band when tuner is selected as a source. Press to cancel the control mode of functions. Press to return to the specified point and start playback from there. Press to pause or resume playback. For audio: Press and hold to perform fast reverse or fast forward. For video: Press to perform fast reverse or fast forward. Press to return to the previous track (chapter) or go to the next track (chapter). Press to answer or end a call.
Basic operation Resetting the microprocessor English 2400NEX 2300NEX CAUTION • Pressing the RESET button resets settings and recorded contents to the factory settings. – Do not perform this operation when a device is connected to this product. – Some of the settings and recorded contents will not be reset. • The microprocessor must be reset under the following conditions: – Prior to using this product for the first time after installation. – If this product fails to operate properly.
CAUTION • Remove the battery if the remote control is not used for a month or longer. • There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. • Do not handle the battery with metallic tools. • Do not store the battery with metallic objects. • If the battery leaks, wipe the remote control completely clean and install a new battery.
4-speaker system with front and rear speakers, or a 6-speaker system with front and rear speakers and subwoofers. [Network Mode] 3-way system with a high range speaker, middle range speaker and subwoofer (low range speaker) for reproduction of high, middle and low frequencies (bands). 5 6 Touch [OK]. Initial Legal Disclaimer screen appears. Touch [OK]. The top menu screen appears. NOTE Once the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings.
Operating list screens English Touching an item on the list allows you to narrow down the options and proceed to the next operation. Appears when all characters are not displayed on the display area. If you touch the key, the rests are scrolled for display. NOTE This function is available only when you stop your vehicle in a safe place and apply the parking brake. Appears when items cannot be displayed on a single page. Drag the side bar, the initial search bar or the list to view any hidden items.
Switches the dimmer duration by day or night. Switches between playback and pause. Skips files forward or backward. Performs fast reverse or fast forward. Displays setting menu screen (page 78). Closes the menu bar. Top menu screen - 18 - English NOTE When AppRadio Mode + is on, AppRadio Mode + SideControlBar is displayed.
Favorite source icons AV operation key Displays the current source. TIP When the last source is displayed behind the key, you can switch the source by touching the key. Setting the time and date (page 94) Settings (page 78) and Favorite menu (page 93) Connected device key Displays connected device. Switches the source or application with connected devices such as AppRadio Mode +, external navigation system, etc.
Bluetooth Bluetooth connection 4 5 6 Turn on the Bluetooth function on the device. Press (touch) . Touch then . The Bluetooth screen appears. Touch [Connection]. Touch . The unit starts to search for available devices, then displays them in the device list. Touch the Bluetooth device name. After the device is successfully registered, a Bluetooth connection is established by the system. Once the connection is established, the device name is displayed on the list.
CAUTION Never turn this product off and disconnect the device while the Bluetooth setting operation is being processed. Description [Connection] Connect, disconnect, or delete registered Bluetooth device manually. Touch to delete registered device. To connect a registered Bluetooth device manually, touch the name of the device. To disconnect the device, touch the name of the connected device in the list.
Hands-free phoning To use this function you need to connect your cellular phone to this product via Bluetooth in advance (page 20). CAUTION For your safety, avoid talking on the phone as much as possible while driving. Making a phone call 1 2 3 Press (touch) . Touch . The phone menu screen appears. Touch one of the call icons on the phone menu screen.
The following items are displayed. • Name of the current cellular phone • List number of the current cellular phone • Reception status of the current cellular phone • Battery status of the current cellular phone English TIP If you connect two cellular phones to this product at the same time, you can switch between the cellular phones using the switch devices key. Switches the search language to English or system language. NOTE It may not appear depending on the system language setting.
2 3 4 Touch . Touch or . On the [Phone Book] screen, touch the desired name to display the contact’s phone number. Touch . English ▶Dialing from the preset dial list 1 2 Touch . Touch the desired entry on the list to make a call. The dial screen appears and dialing starts. ▶Deleting a phone number 1 2 3 4 5 Press (touch) Touch . Touch . Touch . . Touch [Yes]. Receiving a phone call 1 Touch Touch TIPS • Touch • Touch to answer the call. to end the call.
1 2 3 Press (touch) Touch . . Touch . The voice recognition function launches and the voice control screen appears. Minimizing the dial confirmation screen 1 Touch . TIP To display the dial confirmation screen, touch again. NOTES • The dial confirmation screen cannot be minimized on the AV operation screen. • AV sources cannot be selected even if the dial confirmation screen is minimized while talking on the phone or receiving an incoming call. Phone settings 1 2 Press (touch) Touch then . .
1 Touch or to turn private mode on or off. Adjusting the other party’s listening volume This product can be adjusted to the other party’s listening volume. 1 Touch to switch between the three volume levels. Notes for hands-free phoning ▶General notes • Connection to all cellular phones featuring Bluetooth wireless technology is not guaranteed.
▶The received call and dialed number histories • You cannot make a call to the entry of an unknown user (no phone number) in the received call history. • If calls are made by operating your cellular phone, no history data will be recorded in this product. • If there are more than 1 000 phone book entries on your cellular phone, not all entries may download completely. • Depending on the phone, this product may not display the phone book correctly.
The Bluetooth audio playback screen appears. Basic operation Bluetooth audio playback screen English Track number indicator Switches between playback and pause. Skips files forward or backward. • By pressing (touching) then touch or forward or backward. • By pressing (touching) then touch and hold perform fast reverse or fast forward. , you can also skip files or , you can also Sets a repeat play range. Plays files in random order. Selects a file or folder from the list to playback.
AppRadio Mode + You can operate iPhone or smartphone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. WARNING Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.
• If you connect your device to this product while an AppRadio Mode + compatible application is already running, the application operation screen will appear on this product. • The desired application is launched, and the application operation screen appears. to go back to the top menu screen. • Press (touch) AppRadio Mode + English Displays the current source. Displays the launcher application screen. Displays the previous screen. Displays the menu screen.
For smartphone (Android) users NOTES • [USB MTP] is set to [Off] to use AppRadio Mode + (page 79). • The video playback capability depends on the connected Android device. 1 Touch . Touch [AppRadio Mode]. Touch desired icon in the tab. The AppRadio app is launched. Using the keyboard When you tap the text input area of an application for iPhone, a keyboard will be displayed on the screen. You can input desired text directly from this product.
The audio mix menu will be displayed on the screen. English Touch to mute. Touch again to cancel mute. Adjusts the audio volume. TIP The AV operation screen and the Application screen can be switched by pressing (touching) - 32 - .
AV source Supported AV source Displaying the AV operation screen 1 Press (touch) then touch the AV operation key. The AV operation screen appears. Displays the source list. - 33 - English You can play or use the following sources with this product. • Radio • USB The following sources can be played back or used by connecting an auxiliary device.
Selecting a source Source on the AV source selection screen Press (touch) then touch . Touch the source icon. When you select [Source OFF], the AV source is turned off. Source on the source list 1 2 3 Press (touch) Touch then touch AV operation key. . Touch the source key. When you select [Source OFF], the AV source is turned off. Changing the display order of source NOTE This function is available only when you stop your vehicle in a safe place and apply the parking brake.
Adjusting the range of favorite source icons area NOTE This function is available only when you stop your vehicle in a safe place and apply the parking brake. 3 Press (touch) . Touch and hold . appears at the top left of the favorite source icons. Drag to the desired position. To finish the adjusting, touch any place of the display except for the favorite source icons area.
When using an iPod/iPhone or a smartphone with this product, the settings are automatically configured according to the device to be connected. This section describes source compatibility for each device with the connection. NOTES • Operation methods may vary depending on the iPod/iPhone model or smartphone and its software version. • Depending on the software version of iPod/iPhone or the version of smartphone OS, it may not be compatible with this unit.
TIP You can connect and control an iPod/iPhone compatible with this product by using separately sold connector cables. Connecting via Bluetooth 2 3 Press (touch) then touch . Touch compatible desired source. Connecting via CD-IU52 The following sources are available when an iPod/iPhone with a Lightning connector is connected to the unit via CD-IU52 (sold separately). • iPod • Pandora • Spotify 1 Connect an iPod/iPhone to USB port of this product by CD-IU52. 2 3 Press (touch) then touch .
• Connecting via CD-IU51* (page 38) * Sold separately Compatible iPhone model • iPhone 4s For details about iPhone compatibility with this product, refer to the information on our website. Connecting via Bluetooth The following sources are available when an iPhone is connected to the unit via Bluetooth. • iPod • Pandora • Spotify • Bluetooth audio 1 Connect an iPhone with this product via Bluetooth (page 20). 2 3 Press (touch) then touch . Touch compatible desired source.
* Sold separately Compatible smartphones Compatibility with all smartphones is not guaranteed. For details about smartphone compatibility with this product, refer to the information on our website. Connecting via Bluetooth 2 3 Press (touch) then touch . Touch compatible desired source. Connecting via CD-MU200 The following sources are available when a smartphone is connected to the unit via CDMU200. • AppRadio Mode + 1 Connect a smartphone to USB port of this product by CD-MU200.
Radio Starting procedure Press (touch) then touch . Touch [Radio]. The Radio screen appears. Basic operation Radio screen Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. Displays the preset channel list. Select an item on the list ([1] to [6]) to switch to the preset channel. Selects the FM1, FM2, FM3 or AM band. Performs BSM (best stations memory) function (page 41).
Manual tuning Seek tuning or non stop seek tuning Releasing the key in a few seconds skips to the nearest station from the current frequency. Keep holding the key for long seconds to perform, performs non stop seek tuning. then touch or , you can also switch the preset channels.
Menu Item Description [Local] Local seek tuning allows you to only tune into [Off] radio stations with sufficiently strong signals. FM: [Level1] [Level2] [Level3] [Level4] NOTE AM: [Level1] [Level2] [Level4] for FM and [Level2] for AM are available only with the stations with the strongest signals.
Compressed files Plugging/unplugging a USB storage device Plugging a USB storage device 1 2 Pull out the plug from the USB port of the USB cable. Plug a USB storage device into the USB cable. NOTES • This product may not achieve optimum performance with some USB storage devices. • Connection via a USB hub is not possible. • A USB cable is required for connection. USB cable USB storage device Unplugging a USB storage device 1 Pull out the USB storage device from the USB cable.
2 3 Plug the USB storage device into the USB cable (page 43). Touch [USB]. Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files. Audio source Audio source screen 1 (Example: USB) Displays the link search screen. Touch the song to play back followed by touching the song information, after switching to Music Browse mode (page 46). TIP If you touch the artwork, the list of songs in the album is displayed.
Sets a repeat play range for all files/the current folder/the current file. Displays the hidden function bar. TIP You can also display the hidden function bar by flicking the bar from the right to the left. Switches the following media file types. [Music]: Compressed audio files [Video]: Compressed video files [Photo]: Image files Selects a file from the list. Touch a file on the list to playback. TIP Touching a folder on the list shows its contents. You can play a file on the list by touching it.
Displays the hidden function bar. TIP You can also display the hidden function bar by flicking the bar from the left to the right. Selects the previous folder or the next folder. Switches the current music information display. ▶Selecting a file using Music Browse mode You can select files to play back using the category list if the files contain tag information. NOTES • This function is available for the USB storage device only. • Music Browse mode cannot be held once the power is turned off.
Video source screen (Example: USB) English Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Performs fast reverse or fast forward. Touch again to change the playback speed. Stops playback. Performs frame-by-frame playback. Performs slow-motion playback. Sets a repeat play range for all files/the current folder/the current file. Switches the audio/subtitle language. TIP The icons vary according to the file.
Selects a file from the list. Touch a file on the list to playback. TIP Touching a folder on the list shows its contents. You can play a file on the list by touching it. Skips files forward or backward. English Still image source TIPS • Image files are not displayed in the rear display. • By pressing (touching) then touch and hold or on the still image file, you can search through 10 image files at a time.
Saves the current images as the wallpaper. Touch the following items then touch [Yes] to overwrite the image. [As AVScreen]: Saves the image as the wallpaper for the AV screen. [As HomeScreen]: Saves the image as the wallpaper for the top menu screen. [As Both]: Saves the image as the wallpaper for both the AV screen and top menu screen. Rotates the displayed picture 90° clockwise. Sets a repeat play range for all files/the current folder.
iPod Connecting your iPod NOTES • Depending on the generation or version of the iPod, some functions may not be available. • Do not delete the Apple Music® app from your iPod, since some functions may not be available. 1 2 3 Connect your iPod. Press (touch) then touch . Touch [iPod]. Basic operation TIPS • By pressing (touching) • By pressing (touching) forward. then touch or , you can also skip files forward or backward.
Displays the link search screen. Select a song from the list related to the song currently playing. TIP If you touch the artwork, the list of songs in the album is displayed. Switches between playback and pause. Skips files forward or backward. Sets a repeat play range for all in the selected list/the current song. Plays songs within the selected list/album randomly. Displays the hidden function bar. Switches among connected devices. Selects a song from the list.
Audio source screen 2 English Changes the audiobook speed. Normal—Fast—Slow Displays the hidden function bar. Apple Music® Radio source Important Apple Music Radio may not be available in your country or region. For details about Apple Music Radio, visit the following site: http://www.apple.
Displays the pop-up menu for Apple Music Radio. • Touch [Play More Like This] to play back songs similar to the current song. • Touch [Play Less Like This] to set it not to play back the current song again. • Touch [Add to iTunes Wish List] to add the current song to the iTunes® wish list. Skips tracks forward. - 53 - English NOTE This function may not be used depending on your Apple Music account status.
Pandora® WARNING Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing. Important • Create a free or a paid account online.
3 4 Touch [Pandora]. Launch the Pandora application on the mobile device and start playback. • For details on Bluetooth connection, see page 20. • For details on USB connection, refer to the Installation Manual. English Basic operation Playback screen Recalls the preset station stored to a key from the memory. Stores the current station to a key. Displays the preset station list. Select an item on the list ([1] to [6]) to switch to the preset station. Switches between playback and pause.
Adds information for the track currently playing to bookmarks. Switches among connected devices. • • • : Switches to the station list. : Switches to the genre list. : Plays only one track based on particular musical characteristics from several shuffled stations. • : Deletes the station. • A-Z: Sorts the items in the list alphabetically. • Date: Sorts the items in the list in the order of the dates. TIP Shared stations are indicated by * and . are not available when using a shared station.
Spotify® WARNING Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing. Important • Confirm the requirements to access Spotify using Pioneer car audio/video (page 36).
Press (touch) Touch then . . Touch [AV Source Settings]. Confirm that [Spotify] is turned on. Press (touch) then touch English 2 3 4 5 6 7 . Touch [Spotify]. NOTES • For details on Bluetooth connection, see page 20. • For details on USB connection for iPhone, refer to the Installation Manual. Basic operation Playback screen 1 (Track) Switches between playback and pause. Skips tracks forward or backward. TIP By pressing (touching) then touch , you can skip tracks forward.
Displays the hidden function bar. TIP You can also display the hidden function bar by flicking the bar from the right to the left. Switches among connected devices. Playback screen 2 (Track) Displays the hidden function bar. TIP You can also display the hidden function bar by flicking the bar from the left to the right. Sets a repeat play range. Plays tracks in random order. - 59 - English Selects a track or station from the list.
Playback screen 1 (Radio mode) English Switches between playback and pause. Skips tracks forward or backward. TIP By pressing (touching) then touch , you can skip songs forward. Starts new radio mode. Saves or deletes the current song information to or from Your Music. Displays the hidden function bar. TIP You can also display the hidden function bar by flicking the bar from the right to the left. Switches among connected devices. Selects a track or station from the list.
Playback screen 2 (Radio mode) English Displays the hidden function bar. TIP You can also display the hidden function bar by flicking the bar from the left to the right. Gives a Thumbs Up to the playing track. Gives a Thumbs Down to the playing track and skips to the next track.
SiriusXM® Satellite Radio Subscribing to the SiriusXM Satellite Radio service 1 2 3 4 Press (touch) then touch . Touch [SiriusXM]. You should be able to tune in to Channel 1. If you cannot get Channel 1, ensure that your SiriusXM Connect Vehicle Tuner is installed correctly. Switch to Channel 0 and check the Radio ID. The SiriusXM Radio ID can be found by tuning in to Channel 0. You will need this number to activate your subscription.
Listening to SiriusXM 1 2 Press (touch) then touch . Touch [SiriusXM]. TIPS • By pressing (touching) then touch or , you can move the preset channels up or down on the current channel screen, and skip files forward or backward on the play time indicator screen. • By pressing (touching) then touch and hold or , you can move channels up or down on the current channel screen, and perform fast reverse or fast forward on the play time indicator screen.
Performs TuneScan™ (page 65). Switches TuneMix™ to on or off. You can use TuneMix™ from each of the music channels stored as presets on the current band. Performs channel number down/up. Performs fast channel number down/up. Switches to the channel broadcasting the traffic and weather information for the selected city (Traffic & Weather Now™). Touch the desired city to access the latest Traffic & Weather report for your favorite market. To cancel Traffic & Weather Now™, touch .
Selects a channel from the list. Select the category name or the list of all channels then touch the desired channel. To switch the display list, touch . NOTES • The types of categories available depend on the types of channels available. • It may take time to display the channel list depending on the SiriusXM reception condition. Replay™ Mode (Time bar display) Switches between playback and pause. Performs content forward or backward. Performs fast forward or rewind.
1 Touch to display the following display. English Continues playing the current scanning song or channel. Skips to the previous/next song during TuneScan™ or to the previous/next channel during category scan. Cancels scan play and returns to the previous channel. SportsFlash™ SportsFlash™ will notify you when a big play happens during a game with one of your favorite sports teams. Choose to tune in and hear the play unfold like it was live.
How to access Parental lock The Parental Control feature allows you to limit access to any SiriusXM channels, including those with mature content. When enabled, the Parental Control feature requires you to enter a passcode to tune to the locked channels. For details, see [Parental Control] in SiriusXM settings (page 67). SiriusXM settings 1 2 3 4 Press (touch) . Touch then . The system setting screen appears. Touch [AV Source Settings]. Touch [SiriusXM settings].
Menu Item Description [Featured Favorites] [On] [Off] Set to [On] to allow you to discover new channels created by the SiriusXM Programming department. NOTE If the Featured Favorite Band needs to update, the Featured Band Update message will appear. To be notified when the featured seasonal theme is updated. [SportsFlash] [On] [Off] Activates the SportsFlash™ function. • Touch [Play] to listen to the notified channel. • Touch [Ignore] to stay tuned to the current channel.
AUX You can display the video image output by the device connected to video input. NOTE A Mini-jack AV cable (CD-RM10) (sold separately) is required for connection. For details, refer to the Installation Manual. Starting procedure 1 2 3 4 5 6 Press (touch) Touch then . . Touch [Input/Output settings]. Confirm that [AUX Input] is turned on. Press (touch) then touch . Touch [AUX]. The AUX screen appears.
Hides the touch panel keys. To display the keys again, touch anywhere on the screen. TIP You can set the screen size for the video image (page 94). Switches between the video input and audio input.
AV input You can display the video image output by the device connected or the camera to video input. For details, refer to the Installation Manual. Starting procedure 1 2 3 4 5 6 7 Press (touch) Touch then . . Touch [Input/Output settings]. Touch [AV Input]. Touch [On]. Press (touch) then touch . Touch [AV]. The image is displayed on the screen. - 71 - English CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion.
MIXTRAX MIXTRAX is an original technology for creating non-stop mixes of selections from your audio library, complete with DJ effects. English MIXTRAX EZ operation You can use this unit to play USB audio files. MIXTRAX EZ is used to add a variety of sound effects between songs for arranging the pauses between songs. It allows you to enjoy listening to music non-stop. NOTES • This function is only available when a file on a USB storage device is being played.
MIXTRAX settings 1 2 . Touch then . The system setting screen appears. English 3 4 Press (touch) Touch [AV Source Settings]. Touch [MIXTRAX Settings]. Menu Item Description [Short Playback Mode] [Off] [60s] [90s] [120s] [150s] [180s] [Random] Specify the playback portion. [Display Effect] [On] [Off] Set the effect display for MIXTRAX. [Cut-In Effect] [On] [Off] Set the effect tone that sounds when you skip tracks forward or backward.
iDatalink Using iDatalink NOTE Since the type of module varies depending on the vehicle model, search for your vehicle at the following URL to determine what features are available for each module. Remember to select the correct radio model for accurate results. http://maestro.idatalink.com/support Important • For details about vehicle models that are compatible with the iDatalink adapter, refer to the information on our website. • After installing the iDatalink adapter, be sure to check the operations.
3 4 NOTE When the serial number input is required, input the device number of this product. Install the vehicle/head unit specific firmware on your iDatalink Maestro module. NOTES • For details on installing the firmware, refer to iDatalink Maestro website. • For details on connecting this product to iDatalink Maestro, refer to the Installation Manual. • You can also check the device number on the [Firmware Information] screen of this product (page 84).
Displays the Climate screen. Displays the Parking Assist screen.
Parking Assist screen English Displaying obstacle detection information CAUTION This function is intended solely to assist the driver’s vision. It does not detect all dangers and obstacles and is not a substitute for your attentiveness, judgement, and care while parking your vehicle. NOTE This function is only available for vehicles equipped with a parking sensor system. iDatalink settings 1 2 3 Press (touch) Touch . then . Touch [OEM Settings] or [OEM Volume Settings].
Settings You can adjust various settings in the main menu. 1 2 3 Press (touch) Touch . . Touch one of the following categories, then select the options. System settings (page 78) Theme settings (page 85) Audio settings (page 86) Video settings (page 92) Bluetooth settings (page 20) System settings The menu items vary according to the source.
[Auto Mix] Menu Item Description [Auto Mix] [On] [Off] Select whether to perform mixing the sound output from AppRadio Mode + and AV source sound automatically. English [Input/Output settings] Menu Item Description [USB MTP] [On] [Off] Select whether or not to activate USB MTP (Media Transfer Protocol) connection. [AppRadio Mode Sound] Set where the sound for AppRadio Mode + is output when it is used with a smartphone. [AVH] The sound is output from the speakers of this unit.
NOTE To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On] (page 80). CAUTION Menu Item Description [Back Camera Input] [On] [Off] Setting rear view camera activation. CAUTION Do not set to [On] unless the rear view camera is connected since the screen may not be displayed. [Camera Polarity] Setting the polarity of the rear view camera. [Battery] The polarity of the connected lead is positive. [Ground] The polarity of the connected lead is negative.
[Restore Settings] Menu Item Description [All Settings] Touch [Restore] to restore the settings to the default settings. NOTES • This setting is available only when you stop your vehicle in a safe place and apply the parking brake. • The source is turned off and the Bluetooth connection is disconnected before the process starts. [Keyboard] Menu Item Description [Keyboard] You can use the keyboard in AppRadio Mode + by setting the language of the keyboard for iPhone.
Description [Touch panel calibration] 1 Touch [Yes]. 2 Touch two corners of the screen along the arrows then touch the centers of the two [+] marks at the same time twice. . 3 Press (touch) The adjustment results are saved. 4 Press (touch) once again. Proceed to 16-point adjustment. 5 Gently touch the center of the [+] mark displayed on the screen. The target indicates the order. • When you press (touch) , the previous adjustment position returns.
Menu Item Description [Dimmer Duration] Adjust the time that the dimmer is turned on or off by dragging the cursors or touching or . You can use this function when [Dimmer Trigger] is set to [Time]. NOTE The time display of the dimmer duration adjusting bar depends on the clock display setting (page 94). [Picture Adjustment] You can adjust the picture for each source and rear view camera. CAUTION For safety reasons, you cannot use some of these functions while your vehicle is in motion.
* With some pictures, you cannot adjust [Hue] and [Color]. [System Information] Menu Item Description [Firmware Information] Displaying the firmware version. [Firmware Update] CAUTION • The USB storage device for updating must contain only the correct update file. • Never turn this product off, disconnect the USB storage device while the firmware is being updated. • You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
[OEM Settings] Menu Item Description [OEM Settings] (page 77). Menu Item Description [OEM Volume Settings] (page 77). Theme settings The menu items vary according to the source. Menu Item Description [Background] [Home] [AV] Select the wall paper from the preset items in this product or original pictures via the external device. The wall paper can be set from selections for the top menu screen and AV operation screen. Preset Display Select the desired preset background display.
Menu Item (off ) Description Hides the clock display. *1 Refer to Still image source (page 48). *2 You can preview the top menu screen or the AV operation screen by touching [Home] or [AV] respectively. English Audio settings The menu items vary according to the source. Some of the menu items become unavailable when the volume is set to mute or the source is off.
Menu Item [Off] [Source Level Adjuster] [-4] to [+4] Description The volume does not change. TIP If you directly touch the area where the cursor can be moved, the SLA (source level adjustment) setting will be changed to the value of the touched point. NOTES • Settings are based on the FM tuner volume level, which remains unchanged. • This function is not available when the FM tuner is selected as the AV source. • This function is available only for the currently selected source.
Description [Time Alignment] [On] [Off] Listening position*1*2 [Off] [Front-L] [Front-R] [Front] [All] Standard Mode*3*5 [Front Left] [Front Right] [Rear Left] [Rear Right] [Subwoofer] Network Mode*3*5 [High Left] [High Right] [Mid Left] [Mid Right] [Subwoofer] Distance [0] to [140] Select or customize the time alignment settings to reflect the distance between the listener’s position and each speaker. You need to measure the distance between the head of the listener and each speaker unit.
Menu Item Description [Automatic Level Control] Corrects automatically the audio level difference between the music files or the sources. Turns the auto level control setting off. [Mode1] Corrects a little the audio level difference between the music files or the sources (for the narrow dynamic range audio signal). [Mode2] Corrects widely the audio level difference between the music files or the sources (for the wide dynamic range audio signal).
▶Before operating the Auto EQ function – The reflected sound within the vehicle is strong and delay occurs. – The LPF on active subwoofers or external amps delay the lower sounds. • If an error occurs during measurement, check the following before measuring the vehicle’s acoustics.
3 4 Turn on the ignition switch (ACC ON). If the vehicle’s air conditioner or heater is turned on, turn it off. Switch the AV source to [Source OFF] (page 34). Press (touch) Touch then . English 5 6 7 8 9 Disconnect the iPhone or smartphone device. . Touch [A-EQ&TA Measurement]. Connect the microphone for acoustical measurement (sold separately) with this product. Plug the microphone into the AUX input jack on the back panel of this product.
NOTE [Subwoofer Settings] is available only when [Subwoofer] is [On]. Press (touch) Touch . then . Touch [Crossover] or [Subwoofer Settings]. Touch or to switch the speaker. Drag the graph line to set the cutoff position. Drag the lowest point of the graph to set the cutoff slope. The following items can also be set. Switches the subwoofer phase between normal and reverse position. LPF/HPF Switches the LPF/HPF setting to [On] or [Off].
Favorite menu Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the [Favorites] screen. Creating a shortcut 1 2 Press (touch) then touch . Touch the star icon of the menu item. The star icon for the selected menu is filled in. TIP To cancel the registration, touch the star icon in the menu column again. Selecting a shortcut 1 2 3 Press (touch) Touch then touch . . Touch the menu item.
Other functions Setting the time and date Touch the current time on the screen. Touch or to set the correct time and date. You can operate the following items: Year, month, date, hour, minute. TIPS • You can change the time display format to [12hour] or [24hour]. • You can change the order of date display format: Day-month, Month-day. Changing the wide screen mode You can set the screen mode for AV screen and image files. 1 Touch the screen display mode key.
[Trimming] An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is. If the screen ratio differs from the image, the image may be displayed partly cut off either at the top/bottom or sides. NOTE [Trimming] is for image files only. NOTES • Image files can be set to either [Normal] or [Trimming] in wide screen mode. • Depending on the software version of this unit, this function may vary.
Apple CarPlay™ You can operate iPhone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. NOTE The compatible finger gestures vary depending on the application for the iPhone. WARNING Certain uses of the iPhone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked.
3 4 Touch [Driving Position]. English Touch the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure 1 2 3 4 5 Connect an Apple CarPlay compatible device to this product via USB. Press (touch) Touch . . Touch [Apple CarPlay]. Touch Apple CarPlay icon in the tab. The application screen appears. TIP You can use Siri function by pressing (touching) once Apple CarPlay is activated.
Touch [+]/[-] to adjust the guidance volume. Displays the main sound volume. To adjust the main sound volume, press (touch) VOL (+/-) on the unit or touch [+]/[-]. NOTE The volume menu is displayed for four seconds. If the menu disappears, press (touch) VOL (+/-) again. The menu reappears. - 98 - English Touch to mute. Touch again to cancel mute.
Android Auto™ 2400NEX 2300NEX Compatible Android devices Requires the Android Auto app on Google Play and an Android compatible smartphone running Android 5.0 Lollipop or higher. NOTES • [USB MTP] is set to [Off] to use Android Auto (page 79). • The compatible finger gestures vary depending on the application for the smartphone. WARNING Certain uses of the smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions.
The system setting screen appears. 3 4 Touch [Driving Position]. English Touch the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure 1 2 3 4 5 Connect an Android Auto™ compatible device to this product via USB. Press Touch . . Touch [Android Auto]. Touch Android Auto icon in the tab. The application screen appears. TIP You can use voice recognition function by pressing once Android Auto is activated.
Touch [+]/[-] to adjust the guidance volume. Displays the main sound volume. To adjust the main sound volume, press VOL (+/-) on the unit or touch [+]/[-]. NOTE The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The menu reappears. Setting the auto-launch function If this function is set to on, Android Auto will launch automatically when an Android Auto compatible device is connected to this product.
Appendix for Apple CarPlay and Android Auto When problems occur with this product, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, record the error message and contact your dealer or your nearest Pioneer service center. Apple CarPlay Attempting to connect to Apple CarPlay. • Communication failed and the system is trying to connect. • Wait for a while.
Please note that the use of this accessory with an Apple product may affect wireless performance. iPhone, iPod, iPod nano, iPod touch, and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries. Detailed information regarding connected iPod devices iOS Apple CarPlay Apple CarPlay is a trademark of Apple Inc.
app-based connected content via 3G, EDGE and/or LTE (4G) networks. • Connection to the Internet via 3G, EDGE, LTE (4G) or Wi-Fi network. • Optional Pioneer adapter cable connecting your iPhone to this product. driving), but the extent to which content can be used is determined by the App providers.
Appendix Troubleshooting Common problems A black screen is displayed, and operation is not possible using the touch panel keys. → [Power OFF] mode is on. – Press (touch) any button on this product to release the mode. → [Back Camera Input] is set to [On] in [Camera settings] without connecting the rear view camera. – MVH-2400NEX/MVH-2300NEX: Press the RESET button. – MVH-1400NEX: Disconnect the (-) battery cable then reconnect it, or remove this product then reinstall it.
– Park your vehicle in a safe place, and then turn off the ignition switch (ACC OFF). Subsequently, turn the ignition switch to on (ACC ON) again. – Update the iPod software version. → Cables are not connected correctly. – Connect the cables correctly. No back camera image when the vehicle is in reverse. → The back camera input setting on the receiver is set to Off. – Change the back camera setting to On in the settings menu. (Refer to the System Settings section of this manual to adjust.
– Press (touch) to display the top menu screen. → The smartphone OS may be awaiting screen operation. – Stop the vehicle in a safe place and check the screen on the smartphone. The smartphone was not charged. → Charging stopped because the temperature of the smartphone rose due to prolonged use of the smartphone during charging. – Disconnect the smartphone from the cable, and wait until the smartphone cools down. → More battery power was consumed than was gained from charging.
Poor network connection. Listening will resume when it’s restored. → The Pandora application is accessed/ relocated from outside the licensing region. – Access Pandora from within the licensing region. No Spotify → The Spotify application is not installed in the connected device. – Install the Spotify application in your mobile device. Update App → The Spotify application is out of date. – Update to the latest Spotify application. Login Please → You are not logged in to the Spotify application.
– Verify that your vehicle is outdoors with a clear view of the southern sky. – Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on the outside of the vehicle. – Move the SiriusXM antenna away from any obstructions. Channel Not Available → The channel that you have requested is not a valid SiriusXM channel. – Visit www.siriusxm.com for more information about the SiriusXM channel lineup.
Skipped → The connected USB storage device contains DRM protected files. – The protected files are skipped. Incompatible USB → The connected USB storage device is not supported by this product. – Disconnect your device and replace it with a compatible USB storage device. Check USB → The USB connector or USB cable has short-circuited. – Check that the USB connector or USB cable is not caught in something or damaged. → The connected USB storage device consumes more than maximum allowable current.
Bluetooth Detailed information for playable media Compatibility Common notes about the USB storage device • Do not leave the USB storage device in any location with high temperatures. • Depending on the kind of the USB storage device you use, this product may not recognize the storage device or files may not be played back properly. • The text information of some audio and video files may not be correctly displayed. • File extensions must be used properly.
• For details on the DivX video versions that can be played on this product, refer to Specifications (page 119). • For more details about DivX, visit the following site: http://www.divx.com/ USB storage device File system: FAT16/FAT32/NTFS Maximum number of directory: 8 Maximum number of folders: 1 500 Maximum number of files: 15 000 Playable file types: MP3, WMA, AAC, WAV, FLAC, DivX, H.264, H.263, MPEG-2, MPEG-4, VC-1, FLV, MKV, JPEG, PNG, BMP MP3 compatibility • Ver. 2.
AAC compatibility • This product plays back AAC files encoded by iTunes. FLAC compatibility USB storage device File extension: .flac Sampling frequency: 8 kHz to 192 kHz DivX compatibility • This product is not compatible with the following: DivX Ultra format, DivX files without video data, DivX files encoded with LPCM (Linear PCM) audio codec • If a file contains more than 4 GB, playback stops before the end. • Some special operations may be prohibited because of the composition of DivX files.
• Files may not be able to be played back depending on the bit rate. .flv Format: H.264 Compatible video codec: H.264 (Baseline Profile/Main Profile/High Profile) Maximum resolution: 1 920 pixels × 1 080 pixels Maximum frame rate: 30 fps • Files may not be able to be played back depending on the bit rate. .m4v Format: MPEG-4/H.264/H.263 Compatible video codec: MPEG-4 (Simple Profile/Advanced Simple Profile)/H.264 (Base Line Profile/Main Profile/High Profile)/H.
SiriusXM® Satellite Radio WMA Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc. FLAC Copyright © 2000-2009 Josh Coalson Copyright © 2011-2013 Xiph.
it may become jammed under the brake or gas pedal. • For details, refer to the iPod manuals. AAC AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG-2 and MPEG-4. Several applications can be used to encode AAC files, but file formats and extensions differ depending on the application which is used to encode. This unit plays back AAC files encoded by iTunes.
Apple Music Apple Music is a trademark of Apple Inc., registered in the U.S. and other countries. Using app-based connected content Important Requirements to access app-based connected content services using this product: • Latest version of the Pioneer compatible connected content application(s) for the smartphone, available from the service provider, downloaded to your smartphone. • A current account with the content service provider. • Smartphone Data Plan.
may constitute an infringement on the author’s rights as protected by the Copyright Law. Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e.
LED (light-emitting diode) backlight Specifications General Rated power source: 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system: Negative type Maximum current consumption: 10.0 A Dimensions (W × H × D): (MVH-2400NEX/MVH-2300NEX) D Chassis: 178 mm × 100 mm × 164 mm (7 in. × 37/8 in. × 6-1/2 in.) Nose: 171 mm × 97 mm × 14 mm (6-3/4 in. × 3-7/8 in. × 1/2 in.) (MVH-1400NEX) D Chassis: 178 mm × 100 mm × 164 mm (7 in. × 37/8 in. × 6-1/2 in.) Display Screen size/aspect ratio: (MVH-2400NEX/MVH-2300NEX) 6.
kHz/4 kHz/5 kHz/6.3 kHz/8 kHz/10 kHz/ 12.5 kHz Slope: -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 dB/oct, -30 dB/oct, -36 dB/oct, OFF Subwoofer: Frequency: 25 Hz/31.5 Hz/40 Hz/50 Hz/63 Hz/80 Hz/100 Hz/125 Hz/160 Hz/200 Hz/250 Hz Slope: -12 dB/oct, -18 dB/oct, -24 dB/oct, -30 dB/oct, -36 dB/oct, OFF Gain: +10 dB to -24 dB (1 dB/step) Phase: Normal/Reverse Time alignment: 0 to 140 step (1 inch/step) Bass boost: Gain: +12 dB to 0 dB Speaker level: +10 dB to -24 dB (1 dB/step) USB USB standard spec: USB 1.1, USB 2.
Usable sensitivity: 12 dBf (1.1 μV/75 Ω, mono, S/N: 30 dB) Signal-to-noise ratio: 72 dB (IHF-A network) AM tuner Frequency range: 530 kHz to 1 710 kHz Usable sensitivity: 28 μV (S/N: 20 dB) Signal-to-noise ratio: 62 dB (IHF-A network) CEA2006 Specifications Power output: 14 W RMS × 4 Channels (4 Ω and < = 1% THD+N) S/N ratio: 91 dBA (reference: 1 W into 4 Ω) NOTE Specifications and design are subject to possible modifications without notice due to improvements. Bluetooth Version: Bluetooth 4.
© 2017 PIONEER CORPORATION. All rights reserved.
