Owner's Manual

27
C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
DMH-160BT
KB010_MLUC(A5_Horizon)
En
English
dealer or your nearest Pioneer service
center.
AMP Error
 This product fails to operate or the
speaker connection is incorrect; the
protective circuit is activated.
–Check the speaker connection. If the
message fails to disappear even after
the engine is switched off/on, contact
your dealer or an authorized Pioneer
Service Station for assistance.
Check Antenna
 The antenna connection is incorrect.
–Check the antenna connection. If the
message fails to disappear even after
the engine is switched off/on, contact
your dealer or the nearest authorized
Pioneer service center for assistance.
Check Tuner
 The SiriusXM Connect Vehicle Tuner
connection is incorrect.
–Check the tuner connection and
battery voltage. If the message fails to
disappear even after the engine is
switched off/on, contact your dealer
or the nearest authorized Pioneer
service center for assistance.
No Signal
 The SiriusXM Connect Vehicle Tuner is
having difficulty receiving the SiriusXM
satellite signal.
–Verify that your vehicle is outdoors
with a clear view of the southern sky.
–Verify that the SiriusXM magnetic
mount antenna is mounted on a metal
surface on the outside of the vehicle.
–Move the SiriusXM antenna away from
any obstructions.
Channel Not Available
 The channel that you have requested is
not a valid SiriusXM channel.
–Visit www.siriusxm.com for more
information about the SiriusXM
channel lineup.
Subscription Updated Press Enter to
Continue
 This product has detected a change in
your SiriusXM subscription status.
–Touch [Enter] to clear the message.
In the U.S.A., visit www.siriusxm.com
or call 1-866-635-2349 if you have
questions about your subscription. In
Canada, visit www.siriusxm.ca or call
1-877-438-9677 if you have questions
about your subscription.
Channel Not Subscribed. Call SiriusXM to
Subscribe.
 The channel that you have requested is
not included in your SiriusXM
subscription package.
–Check the content of your SiriusXM
subscription package.
In the U.S.A., visit www.siriusxm.com
or call 1-866-635-2349 if you have
questions about your subscription
package or would like to subscribe to
this channel. In Canada, visit
www.siriusxm.ca or call 1-877-438-
9677.
Channel Locked Please Enter the Lock
Code
 Locked by the radio Parental Control
feature.
–Release the channel lock.
Memory Full
 The memory has become full while
playback was paused.
–Resume playback.
Common
SiriusXM® Satellite Radio
Memory Nearly Full
 The memory has become nearly full
while playback was paused.
–Resume playback.
Error-02-9X/-DX
 Communication failed.
–Turn the ignition switch OFF and back
ON.
–Disconnect the USB storage device.
–Change to a different source. Then,
return to the USB storage device.
Unplayable File
 There is no playable file in the USB
storage device.
–Check that the files in the USB storage
device are compatible with this
product.
 Security for the connected USB storage
device is enabled.
–Follow the USB storage device
instructions to disable security.
Skipped
 The connected USB storage device
contains DRM protected files.
–The protected files are skipped.
Protect
 All the files on the connected USB
storage device are embedded with
DRM.
–Replace the USB storage device.
Incompatible USB
 The connected USB storage device is
not supported by this product.
–Disconnect your device and replace it
with a compatible USB storage device.
Check USB
 The USB connector or USB cable has
short-circuited.
– Check that the USB connector or USB
cable is not caught in something or
damaged.
 The connected USB storage device
consumes more than maximum
allowable current.
– Disconnect the USB storage device
and do not use it. Turn the ignition
switch to OFF, then to ACC or ON and
then connect a compliant USB storage
device.
HUB Error
 The connected USB hub is not
supported by this product.
– Directly connect the USB storage
device to this product.
No Response
 This product cannot recognize the
connected USB storage device.
– Disconnect the device and replace it
with another USB storage device.
USB was disconnected for device
protection. Do not re-insert this USB
memory into the unit. Please restart the
unit.
 The USB connector or USB cable has
short-circuited.
– Check that the USB connector or USB
cable is not caught in something or
damaged.
 The connected USB storage device
consumes more than maximum
allowable current.
– Disconnect the USB storage device
and do not use it. Turn the ignition
switch to OFF, then to ACC or ON and
then connect a compliant USB storage
device.
 The USB interface cable for iPhone has
short-circuited.
– Confirm that the USB interface cable
for iPhone or USB cable is not caught
in something or damaged.
USB storage device
Pioneer MNR.book Page 27 Thursday, July 30, 2020 8:44 AM