Owner's Manual

Settings
22
C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
DMH-160BT
KB010_MLUC(A5_Horizon)
En
You can adjust various settings in the main menu.
Displaying the setting screen
1 Touch .
2 Touch .
3 Touch one of the following categories, then select the options.
System settings (page 22)
Display settings (page 23)
Audio settings (page 23)
Bluetooth settings (page 8)
Camera settings (page 24)
Phone Connectivity Settings (page 25)
System settings
The menu items vary according to the source.
Menu Item Description
[Language] Select the system language.
• If the embedded language and the selected language setting are
not the same, the text information may not display properly.
• S
ome characters may not be displayed properly.
[Date&Time] Set the clock by touching or .
You can operate the following items: Year, month, date,
hour
, minute.
• You can change the time display format to [12H] or [24H].
• Y
ou can change the order of the month/date display format: [dd/
mm/yyyy], [mm/dd/yyyy].
[Beep Tone] Set off to disable the beep sound when the button is
touched or the screen is touched.
[SiriusXM settings] (page 20)
[Radio settings] (page 12)
[Reset All] Touch [OK] to restore the settings to the default settings.
Do not turn off the engine while restoring the settings.
• T
his setting is available only when you stop your vehicle in a safe
place and apply the parking brake.
• T
he source is turned off and the Bluetooth connection is
disconnected before the process starts.
• Bef
ore starting the restore process, disconnect any device that is
connected to the USB port. Otherwise, some settings may not be
restored correctly.
[About] Displaying and updating the firmware version.
• The USB storage device for updating must contain only the
correct update file.
• Nev
er turn this product off, disconnect the USB storage device
while the firmware is being updated.
• Y
ou can only update the firmware when the vehicle is stopped
and the parking brake is engaged.
1 Download the firmware update files into your
computer.
2 C
onnect a blank (formatted) USB storage device to
your computer then locate the correct update file and
copy it onto the USB storage device.
3 C
onnect the USB storage device to this product
(page 13).
4 T
urn the source off (page 11).
5 Displa
y the [System settings] screen (page 22).
6 T
ouch [About].
7 T
ouch [Update].
[License] Displaying the open source license.
NOTES
TIPS
CAUTION
NOTES
CAUTION
Follow the on-screen instructions to finish updating the
firmware.
NOTES
• This product will reset automatically after the firmware
update is completed if the update is successful.
• If an error message appears on the screen, touch the display
and perform the above steps again.
Menu Item Description
Pioneer MNR.book Page 22 Thursday, July 30, 2020 8:44 AM