Operation Manual
C
:
\P
rogram
Fil
es
(x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
DMH-WT8600NEX/DMH-WT7600NEX/DMH-WC6600NEX/DMH-
W4660NEX/DMH-W4600NEX
20M_DMH_UC_EN(A6_Vertical)
English
- 93 -
NOTE
When the serial number input is required, input the device number of this product.
3 Install the vehicle/head unit-specific firmware on your iDatalink Maestro module.
4 Connect this product to the iDatalink Maestro and install this product to the
vehicle.
The iDatalink function will be active.
NOTES
• For details on installing the firmware, refer to iDatalink Maestro website.
• F
or details on connecting this product to iDatalink Maestro, refer to the Installation Manual.
• Y
ou can also check the device number on the [Firmware Information] screen of this product
(page 106).
Starting procedure
1 Connect the iDatalink Maestro adaptor to this product.
For details, refer to the Installation manual.
2 Touch .
3 Touch then .
4 Touch [Input/Output settings].
5 Touch [AV Input].
6 Confirm that [iDataLink] is selected.
7 Touch then swipe left on the screen.
8 Touch [Car Sources] or [Car Features].
The menu screen you touched appears.
NOTE
The iDataLink function is available only when the input signal is received by the iDatalink Maestro
adaptor.
Car Sources is operated almost the same way as the built-in AV sources on this product is
operated. For details on the operation, refer to the following relevant pages.
• Oper
ating via USB/iPhone (page 52) (page 59)
• Oper
ating via SiriusXM (page 80)
• Oper
ating via Bluetooth audio (page 31)
• Operating via Hands-free phone (page 26)
Using the functions on Car Sources
3LRQHHU015ERRN3DJH:HGQHVGD\-DQXDU\$0