Operation Manual
- 14 -
C
:
\P
rogram
Fil
es
(x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
DMH-WT8600NEX/DMH-WT7600NEX/DMH-WC6600NEX/DMH-
W4660NEX/DMH-W4600NEX
20M_DMH_UC_EN(A6_Vertical)
English
Important
• Do not store the remote control in high temperatures or direct sunlight.
• Do not let the remote control fall onto the floor, where it may become jammed under the brake or gas
pedal.
Starting up the unit
1 Start the engine to boot up the system.
The [Select Program Language] screen appears.
NOTE
From the second time on, the screen shown will differ depending on the previous conditions.
2 Select the language.
3 Touch .
The [Speaker Mode Settings] screen appears.
4 Select the speaker mode.
[Standard Mode]
4-speaker system with front and rear speakers, or a 6-speaker system with front and
r
ear speakers and subwoofers.
[Netw
ork Mode]
3-way system with a high range speaker, middle range speaker and subwoofer (low
r
ange speaker) for reproduction of high, middle and low frequencies (bands).
WARNING
Do not use the unit in Standard Mode when a speaker system for 3-way Network Mode is
connected to the unit. This may cause damage to the speakers.
5 Touch [OK].
Initial Legal Disclaimer screen appears.
6 Touch [OK].
The home menu screen appears.
NOTE
Once the speaker mode is set, the setting cannot be changed unless this product is restored to the
default settings. Restore the default settings to change the speaker mode setting (page 120).
To change the speaker mode, you need to restore this product to the default settings.
1 Restore the default setting (page 120).
Switching the speaker mode
3LRQHHU015ERRN3DJH:HGQHVGD\-DQXDU\$0