User's Manual

Pioneer IP-BUS
accessories
Navigation system
(AVIC-U220 (sold
separately)).
Antenna input
IP-BUS cable
IP-BUS input
(Blue)
26 pin cable (Supplied with Navigation system)
Insert the 26 pin cable in the direction
indicated in the figure.
Please contact your dealer to inquire
about the connectable navigation system.
Connection method
1. Clamp the lead.
2. Clamp firmly with
needle-nosed pliers.
Note:
· The position of the parking brake switch depends on the vehicle model. For details,
consult the vehicle Owner’s Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking
brake. This lead must be connected to the power
supply side of the parking brake switch.
Blue/white
Connect to system control terminal of the power amp or
auto-antenna relay control terminal (max. 300 mA 12 V DC).
Ground side
Power supply side
Parking brake
switch
With a 2 speaker system, do not connect anything to the speaker leads
that are not connected to speakers.
Note:
· Change the initial setting of this unit. The
subwoofer output of this unit is monaural.
En
75
Section
16
Installation
Installation