User's Manual

To set the illumination color, display the “Illu-
mination Color” screen.
1 Display the “System Settings” screen.
2 Touch [Illumi Color].
The “Illumination Color” screen appears.
Selecting the color from the preset
colors
1 Display the “Illumination Color” screen.
2 Touch the color you want.
Available options;
! Colored keys — Selects the desired preset
color
! Memory 1/Memory 2/Memory 3 — Col-
ors registered in the memory
= For details, refer to Creating a user-de-
fined color and storing it to memory on
this page.
! Scan — Shifts between the eight default
colors in sequence gradually.
Creating a user-defined color and
storing it to memory
You can create a user-defined color and set it
as the illumination color.
1 Display the “Illumination Color” screen.
2 Touch [Custom].
The “Illumination Color” screen appears.
p If [Scan] is set, [Custom] cannot be se-
lected.
3 Touch [+] or [-] to adjust the values for
Red, Green and Blue to create a favorite
color.
Watch the illumination of hardware keys while
adjusting the color.
Each time you touch [+]or[-] increases or de-
creases the value of the selected item. +31 to
+00 is displayed as the value is increased or
decreased.
p An entry cannot be stored with all of the va-
lues set to “+00”.
4 Touch [Memory 1], [Memory 2] or
[Memory 3] to store the illumination color.
5 Touch [OK] to return to the previous
screen.
Checking the version information
1 Display the “System Settings” screen.
2 Touch [Service Information].
The “Service Information Screen” screen ap-
pears.
3 Check the version information.
Replicating the settings
You can import settings you have made on the
utility program “NavGate FEEDS” which is
available separately to the navigation system.
Customizing preferences
En
99
Chapter
13
Customizing preferences