User's Manual

Unless [VR Catalog Mode] is turned off, this
navigation system tries to acquire the informa-
tion needed to operate iPod with voice com-
mands. It may take a short period of time to
transfer the information. Change the setting
according to your usage.
The navigation system starts acquiring/catalo-
ging music information (1) when the iPod is
connected or when the system boots up while
the iPod is connected and (2) when iPod is the
selected and displayed AV Source, unless [VR
Catalog Mode] is turned off.
p If you do not use iPod, this setting is un-
necessary.
p During transfer, iPod operations (such as
[Shuffle], [Menu], or [Video]) are not
available.
p Once the cataloging is completed, you can
deactivate [VR Catalog Menu] until you
update the content/data on iPod. If you up-
date the iPod data, activate [VR Catalog
Menu] again to transfer the music informa-
tion and synchronize the music information
for voice commands with the data on iPod.
p After you select “Off” in [VR Catalog
Mode], the system doesn’t catalog the
data on the iPod. In such case, the pre-
viously cataloged data are available as
voice commands.
p Once you start the cataloging process, only
a few basic voice commands can be used
for iPod until the process has completely
finished.
p If unreadable characters are included in
the data on your iPod, names or types may
not be available as voice commands.
Important Notice regarding Voice
Control for iPods
Voice Control for iPods may be limited if cata-
loging of iPod content is not completed. Cata-
loging of iPod content only occurs when the
system is in “AV Source” mode and the “iPod”
is the selected and displayed “AV Source”
screen. Cataloging of iPod content will not
occur if the system is off, if any other “AV
Source” is selected (aside from iPod), or if the
system is in any other mode (aside from “AV
Source” mode) such as “Destination Menu”,
“Contacts List”, “Settings Menu”, “Phone
Menu” or the map screen. If you wish to use
Voice Control for all iPod content, it is recom-
mended that you first connect your iPod, se-
lect “iPod” as the AV source, and keep the
iPod screen displayed until cataloging is com-
pleted — cataloging of iPod content should
only take a few minutes, and will depend on
the size of the conent stored on your iPod. A
message will be displayed when cataloging is
completed.
1 Touch [VR Catalog Menu] on the “AV
System Settings” menu.
= For details, refer to Displaying the “AV Sys-
tem Settings” menu on page 159.
2 Touch [On] or [Off] to activate or deacti-
vate “VR Catalog Mode”.
Displaying your DivX VOD
registration code
In order to play DivX VOD (video on demand)
content on this navigation system, you first
need to register the unit with your DivX VOD
content provider. You do this by generating a
DivX VOD registration code, which you submit
to your provider.
p New translation required.
% Touch [DivX VOD] on the “AV System
Settings” menu.
Your 8-digit registration code is displayed.
p Make a note of the code as you will need it
when you register with a DivX VOD
provider.
Customizing preferences
En
162
Chapter
32