Operation Manual

En/ChH

Getting Started4

開始使用

Improving FM stereo sound

If you’re listening to a stereo FM broadcast, but find that

there is a lot of noise because of a weak signal, try

switching to mono.

1 Press SYSTEM MENU and select TUNER

MENU.

TUNER MENU

• Change menu options using the 2 and 3 buttons.

Press

ENTER to select the currently displayed option.

2 Select FM AUTO/MONO from the tuner

menu.

FM AUTO/MONO

• Change menu options using the 2 and 3 buttons.

Press

ENTER to select the currently displayed option.

3 Select FM AUTO or FM MONO.

• Change menu options using the 5 and ∞ buttons.

Press

ENTER to select the currently displayed option.

When listening in mono, the

indicator lights in the

display.

Saving station presets

If you often listen to a particular radio station, it's

convenient to have the receiver store the frequency for

easy recall whenever you want to listen to that station.

This saves the effort of manually tuning in each time.

This system can save up to 30 station presets. When

saving FM frequencies, the receiver also saves the mono

setting (see above).

1 Tune to a station you want to memorize.

See Listening to the radio on the previous page for