Instruction Manual HTP-076 HOME THEATER PACKAGE En Table of contents ≫ Connections ≫ - Connecting Speakers ≫ Playback ≫ Setup ≫ Troubleshooting ≫ Appendix ≫ Supplementary Information ≫ Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ What’s in the box Additional Function (Firmware Update) Update Information of the firmware Operation of added new functions Firmware Update Procedure Part Names Front Panel Display Rear Panel Remote Controller Speaker/Subwoofer 4 5 5 5 6 8 8 10 11 13 14 Connecting speakers Speaker Installation Speaker Connections and "Speaker Setup" Settings Speaker combinations Connecting the TV To ARC TV To Non-ARC TV Connecting Playback Devices Connecting an AV Component w
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening Mode Effects Input Formats and Selectable Listening Modes Setup Setup Menu Menu list Menu operations 1. Input/Output Assign 2. Speaker 3. Audio Adjust 4. Source 5. Hardware 6.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ What’s in the box 1. Main unit (VSX-326) (1) 2. Remote controller (RC-971R) (1), Batteries (AAA/R03) (2) 3. Indoor FM antenna (1) 4. AM loop antenna (1) 5. Front speaker (S-13F) (2) 6. Center speaker (S-13C) (1) 7. Surround speaker (S-13S) (2) 8. Subwoofer (S-13W) (1) 9. Speaker cable (10' (3 m)) (4) 10. Speaker cable (26' (8 m)) (2) 11. Non skid pad (20) • When installing front speakers, center speaker, or surround speakers on a rack, etc.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Additional Function (Firmware Update) This unit is equipped with a function to update the firmware via USB port when the firmware update is announced after purchase. This enables various functions to be added and operations to be improved. Depending on the manufacturing timing of the product, the firmware may be switched to the updated one. In such a case, new functions may be added from the start.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Firmware Update Procedure Update 1. Connect the USB storage device to your PC. 2. Download the firmware file from our company's website to your PC and unzip. Firmware files are named as below. PIOAVR_.zip Unzip the file on your PC. The number of unzipped files and folders varies depending on the model. 3. Copy all unzipped files and folders to the root folder of the USB storage device. • Make sure to copy the unzipped files. 4.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connect the USB storage device to an external power source if it has its own power supply. • -51: The firmware file is for another model, or the firmware file is corrupted. Retry from the download of the firmware file. • Others: After removing the power plug once, insert it to the outlet, and then start the operation from the beginning. 6. Select "6. Miscellaneous" - "Firmware Update" - "Update via USB" with the cursors in order, then press ENTER. Setup 1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Part Names Front Panel ❏❏ For details, see ( 8 p9) Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. INPUT SELECTOR dial: Switch the input to be played. 2. 4K indicator: Lights up when doing 4K upscaling or 4K pass through. 3. FL OFF indicator: Lights up when the display is turned off by repeatedly pressing the DIMMER button on the remote controller. 4. ZONE A/B button: Selects an audio output destination from among "ZONE A", "ZONE B" and "ZONE A+B". ( p45) 5. PRESET +/- button: Selects preset radio stations registered when using TUNER. ( p42) 6.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Display 1 2 3 7 45 6 8 9 1. Lights in the following conditions. : Connected by BLUETOOTH. HDMI: HDMI signals are input and the HDMI input is selected. DIGITAL: Digital signals are input and the digital input is selected. 2. Lights according to the type of input digital audio signal and the listening mode. 3. Lights in the following conditions. RDS (European, Australian and Asian models): Receiving RDS broadcasting. TUNED: Receiving AM/FM radio.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Rear Panel ❏❏ For details, see ( 11 p12) Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. HDMI OUT jacks: Transmit video signals and audio signals with a HDMI cable connected to a TV. 3. HDMI IN jacks: Transmit video signals and audio signals with a HDMI cable connected to an AV component. 4.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Remote Controller 1. STANDBY/ON button 2. PERSONAL PRESET 1/2/3 buttons: Registers the current setting conditions such as input selector, listening mode, etc. or call the registered settings. ( p47) 3. Input selector buttons: Switches the input to be played. 4. Play buttons: Used for playback operation of a BLUETOOTH-enabled device.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker/Subwoofer Front Speakers/Surround Speakers Included front speakers and surround speakers can be used for both left and right side. The sound quality does not differ when used for left or right side. The grill net cannot be removed. 4mm 1. Wall mount hole: the speaker system may be mounted to a wall by suspending speakers on wooden screw using the wall mount hole. • Wooden wall mount screw is not included.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Center Speaker The grill net cannot be removed. 4mm 1. Speaker jack: use the included speaker cable to connect to the main unit. 2. Wall mount hole: the speaker system may be mounted to a wall by suspending speakers on wooden screw using the wall mount hole. • Wooden wall mount screw is not included. Please consult with a construction service personnel and prepare screw considering its type, material, and length so it provides sufficient support.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Subwoofer 1. Speaker jack: use the included speaker cable to connect to the main unit.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Notice Maintenance • Do not place objects on the speaker system. The speaker system may drops or fall over by losing balance and may cause an injury. • Do not place on a shaky platform, sloping surface, or other unstable place. The speaker system may drop or fall over by losing balance and may cause an injury. • Please select an installation site that has stable floor.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connections Connecting speakers Connecting the TV Connecting Playback Devices Connecting an AV Component in a Separate Room (ZONE B Connection) Connecting Antennas Connecting the Power Cord 19 29 32 34 35 36 18 Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting speakers You can select the layout of speakers to be installed from various patterns when using this unit. Use the following flow chart to select the speaker layout that suits your speakers and usage environment. You can check the connection method and default settings. Use height speakers? Yes • 3.1.2 Channel System ( No p27) • 5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker Installation 5.1 Channel System 2 5 6 This is a basic 5.1 Channel System. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals. Surround speakers create the back sound field. Subwoofer reproduces the bass sound, and creates the rich sound field.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3.1.2 Channel System A 3.1.2 Channel System is a speaker layout consisting of a 3.1 Channel System that includes front speakers, center speaker and subwoofer, and added height speakers. Select the height speakers that suit your speakers and usage environment from the following three types.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏ Front High Speakers Installation Example 4 3´ (0.9 m) or more 3 2 6 This is a 3.1-channel system consisting of front speakers, a center speaker, and a subwoofer, with the installation of front high speakers, a type of height speaker. Installing the height speakers will enrich the sound field feeling in the upper space. Front high speakers should be situated at least 3'/0.9 m higher than the front speakers.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏ Ceiling Speakers Installation Example 2 6 This is a 3.1-channel system consisting of inclueded front speakers, a center speaker, and a subwoofer, with the addition of top middle speakers sold separately, a type of height speaker. Installing the height speakers will enrich the sound field feeling in the upper space. Fit top middle speakers on the ceiling directly above the listening position.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏ Dolby Enabled Speakers (Dolby Speakers) Installation Example 4* 2* 6 5 Separately sold Dolby-enabled speakers have been selected as the height speakers for this system. Dolby enabled speakers are special speakers designed to face the ceiling, so that the sound is heard from overhead by bouncing the sound off the ceiling. Place Dolby enabled speakers (front) above the front speakers.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker Connections and "Speaker Setup" Settings Connections (Note) Speaker Impedance When using the included speakers, setup explained in this section is not required. When using speakers sold separately, use speakers with impedance of 4 Ω to 16 Ω. If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set "Speaker Impedance" to "4 ohms" for "Speaker Setup" in the Initial Setup section ( p85).
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5.1 Channel System 2 6 5 "Speaker Setup" settings during Initial Setup ( p86) 1 Speaker Setup Speaker Channels 4 5.1 ch Subwoofer Yes Height Speaker --- 3 Select how many speakers you have. • • • • This is a basic 5.1 Channel System. For details of the speaker layout, refer to "Speaker Installation" ( 26 p20). ENTER Next Speaker Channels: 5.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3.1.2 Channel System 4 2 6 3 5 "Speaker Setup" settings during Initial Setup ( p86) 1 Speaker Setup Speaker Channels 3.1.2 ch Subwoofer Height Speaker Yes Front High Select how many speakers you have. ENTER Next • Speaker Channels: 3.1.2 ch • Subwoofer: Yes • Height Speaker: Select the type of height speaker actually installed. • Speaker Impedance: Set any value ( p25) This is a combination of the 3.1 Channel System and front high speakers.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker combinations Speaker Channels FRONT CENTER SURROUND HEIGHT SUBWOOFER 2.1 ch 3.1 ch 4.1 ch 5.1 ch 2.1.2 ch 3.1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting the TV Connect this unit between a TV and AV component. Connecting this unit with the TV can output the video and audio signals of the AV component to the TV, or play the audio of the TV on this unit. Connection with the TV differs depending on whether the TV supports the ARC (Audio Return Channel) function or not. The ARC function transmits the audio signals of the TV via an HDMI cable, and plays the audio of the TV on this unit.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ To ARC TV If the TV supports the ARC (Audio Return Channel) function (*), use only the HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the TV for connection. You connect the HDMI cable to the port labeled OUT on the receiver side. • If a 4K high-quality video is played, use a Premium High Speed HDMI Cable or Premium High Speed HDMI Cable with Ethernet whose package has a "PREMIUM Certified Cable" label.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ To Non-ARC TV If the TV does not support the ARC (Audio Return Channel) function (*), connect an HDMI cable and digital optical cable. If the TV does not have a DIGITAL OPTICAL OUT jack, you can use an analog audio cable to connect with the AUDIO IN TV jack. • If you use a cable set-top box, etc.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting Playback Devices Connecting an AV Component with HDMI Jack Mounted This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the HDMI CEC function (*) that enables linking with input selectors, etc.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using a digital coaxial cable or analog audio cable.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting an AV Component in a Separate Room (ZONE B Connection) Connecting a Pre-main Amplifier (ZONE B) While performing playback in the main room (ZONE A), you can enjoy 2-ch audio of the same source in the separate room (ZONE B) at the same time. Use an analog cable to connect the ZONE B LINE OUT jack of this unit and the LINE IN jack of the pre-main amplifier in the separate room. a LINE IN Premain Amp.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting Antennas Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Connecting the Power Cord Connect the power cord after all the connections are completed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Playback AV Component Playback BLUETOOTH® Playback Listening To the AM/FM Radio ZONE B Playback Convenience functions Listening Mode 38 39 40 45 47 52 37 Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫ AV Component Playback You can play the audio from AV components, such as Blu-ray disc players through this unit. Basic Operations Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. 2. Press the input selector whose name is the same as that of the jack to which the player is connected. For example, press BD/DVD to play the player connected to the BD/DVD jack.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ BLUETOOTH® Playback You can wirelessly play the audio on a BLUETOOTH-enabled device, such as a smartphone. Basic Operations Perform the following procedure when this unit is on. Pairing 1. When you press the BLUETOOTH button, "Now Pairing..." is displayed on this unit's display, and the pairing mode is enabled. 2. Enable (turn on) the BLUETOOTH function of the BLUETOOTH-enabled device, and then select this unit from among the devices displayed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening To the AM/FM Radio You can receive AM and FM radio stations on this unit with the built-in tuner. Tuning into a Radio Station Perform the following procedure when this unit is on. Tuning Automatically 1. Press TUNER repeatedly to select either "AM" or "FM". 2. Press MODE repeatedly to display "TunMode: Auto" on the display. 3. When you press the cursors / , automatic tuning starts, and searching stops when a station is found.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ When FM broadcasts reception is poor: Perform the procedure for "Tuning Manually" ( p41). Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception. Tuning Manually Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception. 1. Press TUNER repeatedly to select either "AM" or "FM".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Presetting a Radio Station Registration Procedure You can preset up to 40 of your favorite AM/FM radio stations. After tuning in to the AM/FM radio station you want to register, perform the following procedure. 1. Press +Fav so that the preset number on the display blinks. 2. While the preset number is blinking (approx. 8 seconds), repeatedly press the cursors / to select a number between 1 and 40. 3. Press +Fav again to register the station.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Selecting a Preset Radio Station 1. Press TUNER. 2. Press the cursors / to select a preset number. Deleting a Preset Radio Station 1. Press TUNER. 2. Press the cursors / to select the preset number to delete. 3. After pressing +Fav, press CLEAR while the preset number is blinking, and delete the preset number. When deleted, the number on the display disappears.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Using RDS (European, Australian and Asian models) RDS stands for Radio Data System, and is a method of transmitting data in FM radio signals. In regions where RDS can be used, when you tune in to a radio station broadcasting program information, the radio station name is displayed on the display. When you press on the remote controller in this state, you can use the following functions. • If no stations are found, the message "Not Found" is displayed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ZONE B Playback While performing playback in the main room (ZONE A), you can enjoy the audio of the same source in the separate room (ZONE B) at the same time. Playing Back 1. Press ZONE A/B to select an audio output destination. • ZONE A: Outputs audio only to the main room (ZONE A). "A" on the display of the main unit lights up. • ZONE B: Outputs audio only to the separate room (ZONE B). "B" on the display of the main unit lights up.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ • If "ZONE A+B" is selected as an audio output destination, you can select only the "Stereo" listening mode for the main room (ZONE A) when using the 2.1ch speaker layout. When using a speaker layout of 3.1ch or more, you can select only the "Ext.Stereo" listening mode.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Convenience functions Using PERSONAL PRESET Registration You can register settings ( p48) such as the current input selector and listening mode with the three PERSONAL PRESET buttons, and call a registered setting in a single operation. e.g.) Pressing the PERSONAL PRESET button will automatically switch the input selector to "TUNER" to receive the registered station. Also, the listening mode and volume level are switched as registered.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Settings that can be registered The following settings can be registered with PERSONAL PRESET. –– Input selector (AM/FM radio stations can also be registered.) –– Listening mode –– Volume level (Upper limit "-32 dB") –– Output destination (Zone) –– Sound Retriever function's "On" and "Off" –– TREBLE/BASS/DIALOG, etc. * When AM/FM radio stations are registered, TUNER's preset numbers "38", "39" and "40" ( p42) are overwritten. Using the registered settings 1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Adjusting the tone Adjusting TREBLE/BASS You can adjust the sound quality of the speakers. 1. Press TONE repeatedly to select Treble or Bass and adjust the content. Treble: Enhances or moderates the high-tone range of the speakers. Bass: Enhances or moderates the low-tone range of the speakers. 2. Press + or - for adjustment. Adjusting DIALOG Emphasizes movie lines and music vocals to listen to them more easily. It is effective to movie lines in particular.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 2. Press + or - to adjust the level between "-15.0 dB" and "+12.0 dB". • If you set the unit to the standby mode, the adjustments you made will be restored to the previous statuses.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Sleep Timer You can allow the unit to enter standby automatically when the specified time has elapsed. Press SLEEP button on the remote controller to select the time from "30 min", "60 min" and "90 min". "Off": The unit does not automatically enter standby mode. You can also set this by pressing the button on the remote controller and selecting "5. Hardware" - "Power Management" - "Sleep Timer" ( p81) on the Setup menu.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening Mode You can change the listening mode during play by pressing repeatedly "AUTO/DIRECT", "SURR", or "STEREO". Selecting a Listening mode • Each of AUTO/DIRECT, SURR, and STEREO buttons stores the listening mode that was selected last. If content incompatible of the listening mode selected last is played, the most standard listening mode for the content is automatically selected.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ AUTO/DIRECT button SURR button Press repeatedly and the listening modes suited to the input signal are switched between "Auto Surround", "Direct", and "Pure Direct". After selecting one of them, "Auto Surround" (or "Direct" or "Pure Direct") is displayed, then the most suitable listening mode for the audio format is selected automatically (DTS for multichannel input signals, Stereo for 2 channel input signals, etc.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Checking the input format and listening mode Pressing button on the remote controller or STATUS button on the main unit repeatedly will switch the display of the main unit in the following order. • When using a BLUETOOTH connection, press the STATUS button on the main unit. • Not all the information is necessarily displayed. Input source and volume Listening mode Input format The display is switched in a few seconds.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Listening mode Speaker layout 2.1 ch 3.1 ch 4.1 ch 5.1 ch 2.1.2 ch DD (Dolby Audio - DD) (*1) (*1) (*1) DD+ (Dolby Audio - DD+) (*1) (*1) (*1) (*1) (*1) DTHD (Dolby Audio - TrueHD) (*1) (*1) (*1) (*1) (*1) (*2) Atmos Atmos 2.0/2.1 Atmos 3.0/3.1 Atmos 4.0/4.1 Atmos 5.0/5.1 Atmos 2.0.2/2.1.2 Atmos 3.0.2/3.1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening mode Speaker layout 2.1 ch 3.1 ch 4.1 ch 5.1 ch 2.1.2 ch 3.1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening Mode Effects Updating of listening modes Unlike existing surround systems, Dolby Atmos does not rely on channels, but rather enables the accurate placement of sound objects that have independent motion in a 3D space with even greater clarity. Dolby Atmos is an optional audio format for Blu-ray Discs and achieves a more stereophonic sound field by introducing a sound field above the listener. Listening modes such as Atmos 2.0 and DSur 2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ • When "Speaker Virtualizer" ( p75) is set to "Off" (Default: On), modes other than DSur cannot be selected. DD+ (Dolby Audio - DD+) This mode faithfully reproduces the sound design recorded in the Dolby Digital Plus audio format. The Dolby Digital Plus format has been improved based on Dolby Digital, increasing the number of channels and endeavoring to improve sound quality by giving more flexibility in data bit rates.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ • To enable transfer of this audio format, connect via a digital cable and set audio output on the player to Bitstream output. DTS-HD Master Audio is an optional audio format based on 5.1 ch for Bluray Discs. It is possible to record a maximum of 7.1 channels with additional channels such as the surround back channel using the lossless audio reproduction technology. 96 kHz/24 bit is supported for 7.1 ch, and 192 kHz/24 bit is supported for 5.1 ch.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Ent.Show (Entertainment Show) • This mode cannot be selected when DTS signal is input. • This mode cannot be selected when "Speaker Virtualizer" ( "Off" (Default: On). Suitable for rock or pop music. Listening to music in this mode creates a lively sound field with a powerful acoustic image, like being at a club or rock concert.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Formats and Selectable Listening Modes You can select a variety of listening modes according to the audio format of the signal to be input. • The Stereo mode can be selected with any audio format. • When analog signals are being input in the Pure Direct mode, the modes switches to the Analog Direct mode which passes signals directly to the amplifier without passing through the DSP (Digital Signal Processor).
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode Multich PCM Stereo DSD Stereo PCM*1 *4 *5 Atmos DSur DTS Neural:X DTS Neural:X Unplugged DTS Virtual:X*2 *3 DTS Virtual:X*3 *4 Ent.Show Classical*4 Classical*5 Drama Unplugged*4 Unplugged*5 Ext.Stereo Ent.Show*4 Ent.Show*5 Ext.Mono Drama*4 Drama*5 F.S.Surround*2 Classical Ext.Stereo Ext.Stereo Ext.Mono Ext.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format DD Listening Mode Input Format Stereo DD+ Listening Mode DD*1 *2 *4 *5 DTHD*1 *2 DSur DSur Classical*4 Classical*3 Unplugged*3 Unplugged*4 Unplugged*3 Ent.Show Ent.Show Ent.Show*3 *3 *4 Drama*3 Drama*4 Ext.Stereo*4 Ext.Stereo*5 Ext.Mono*4 Ext.Mono Drama*3 Ext.Mono*4 *1 *2 *3 *4 *5 *6 F.S.Surround*5 *6 Surround Enhancer *5 Cannot be selected when the input format is 2 ch.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS Stereo DTS 96/24 Stereo DTS Express Stereo DTS DTS 96/24 *1 *2 DTS Neural:X DTS Virtual:X Classical *3 *4 *5 *6 *7 DTS Neural:X *4 *5 DTS Virtual:X Classical *3 DTS Neural:X*3 *4 *5 DTS Virtual:X*4 *5 Classical*6 *6 Unplugged *6 Unplugged*6 *6 Ent.Show*6 Ent.Show*6 Ent.Show*6 Drama*6 Drama*6 Drama*6 Ext.Stereo*7 Ext.Stereo*7 Ext.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS-HD HR Stereo DTS-HD MSTR Stereo DTS-ES Stereo *1 *2 DTS-HD MSTR DTS DTS Neural:X*3 DTS-HD HR DTS Neural:X*3 DTS Neural:X DTS Virtual:X*4 *5 DTS Virtual:X*4 *5 DTS Virtual:X*1 *2 Classical Classical Classical*3 *6 Unplugged *2 *3 *4 *5 *6 *7 *6 Unplugged *6 Unplugged*3 *6 Ent.Show*6 Ent.Show*6 Ent.Show*3 Drama*6 Drama*6 Drama*3 Ext.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Input Format Listening Mode DTS:X Stereo DTS:X DTS Virtual:X*1 *2 Classical*3 Unplugged*3 Ent.Show*3 Drama*3 Ext.Stereo*4 Ext.Mono*4 F.S.Surround*1 *1 *2 *3 *4 Cannot be selected if "Speaker Virtualizer" is set to "Off". Cannot be selected when height speakers are installed. Surround speakers or height speakers need to be installed. A center speaker, surround speakers, or height speakers need to be installed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setup Menu Menu list You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations" ( 1. Input/Output Assign 1. TV Out / OSD 2. HDMI Input 3. Digital Audio Input 4. Analog Audio Input 5. Input Skip p69). Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. Change input assignment between the input selectors and HDMI IN jacks.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5. Hardware 1. HDMI 2. Bluetooth 3. Power Management Change the settings for the HDMI functions. Change the settings for the Bluetooth function. Change the settings for the power-save function. p79 p80 p81 6. Miscellaneous 1. Tuner 2. Firmware Update 3. Initial Setup 4. Lock Change the frequency step for the tuner. Change the settings for Firmware Update. Make the initial setup from the setup menu.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Menu operations Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Setup menu. Setup 1. Input/Output Assign 1. TV Out / OSD 2. Speaker 2. HDMI Input 3. Audio Adjust 3. Digital Audio Input 4. Source 4. Analog Audio Input 5. Hardware 5. Input Skip 6. Miscellaneous 6.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. Input/Output Assign 1. TV Out / OSD Setting Item Default Value Setting Details Impose OSD On Set whether or not to display information such as volume adjustment or switching of input on the TV screen. "On": OSD is displayed on the TV. "Off": OSD is not displayed on the TV. • OSD may not be displayed depending on the input signal even if "On" is selected. In this case, change the resolution of the connected device.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3. Digital Audio Input 4. Analog Audio Input Change input assignment between the input selectors and DIGITAL IN COAXIAL/ OPTICAL jacks. If you do not assign a jack, select "---". Change input assignment between the input selectors and AUDIO IN jacks. If you do not assign a jack, select "---".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5. Input Skip 6. PERSONAL PRESET Information You can skip inputs to which nothing is connected when selecting them with the INPUT SELECTOR dial on the main unit. Confirm the registered contents of 1 to 3 buttons of PERSONAL PRESET. The registered settings are displayed in the list. Setting Item Default Value Setting Details Setting Item Default Value Setting Details BD/DVD Use Set whether to skip the BD/DVD input selector.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 2. Speaker 2. Crossover Change the settings of crossover frequencies. 1. Configuration Change the settings of connection environment of the speakers. Setting Item Default Value Setting Details Speaker Channels 5.1 ch Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "2.1.2 ch" or "3.1.2 ch" to suit the number of speaker channels connected. Subwoofer Yes Set whether a subwoofer is connected or not.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Surround Small Set the low range capabilities for each channel by setting either small or large. "Small": For small speakers whose low range capabilities may be limited "Large": For full-range speakers with sufficient low range capabilities • When "Front" is set to "Small", this is set to "Small".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 4. Channel Level 5. Dolby Enabled Speaker Adjust the volume level of each speaker. Change the settings of Dolby Enabled Speakers. Setting Item Default Value Setting Details Setting Item Front Left 0.0 dB Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Dolby Enabled 6.0 ft/1.80 m Speaker to Ceiling Center 0.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3. Audio Adjust 3. DTS Change the setting of when DTS signals are input. 1. Dual Mono / Mono Change the settings of multiplex audio playback. Setting Item Default Value Setting Details Dual Mono Main Set the audio channel or language to be output when playing multiplex audio or multilingual broadcasts, etc. "Main": Main channel only "Sub": Sub channel only "Main/Sub": Main and sub channels are output at the same time.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 4. Source 2. Name Edit Set an easy name for each input. The set name appears on the main unit’s display. Select the input selector to make the setting. 1. Input Volume Absorber Adjust the volume level when there are differences in volume level among multiple devices connected to this unit. Select the input selector to make the setting. Setting Item Default Value Setting Details Input Volume Absorber 0.0 dB Select a value between "-12.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3. Audio Select Select the priority for input selection when multiple audio sources are connected to one input selector. The setting can be separately set to each input selector. Select the input selector to make the setting. Note that some of the default values cannot be changed.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5. Hardware 1. HDMI Change the settings of the HDMI function. Setting Item Default Value Setting Details HDMI CEC Off Setting this to "On" enables the input selection link and other link functions with HDMI-connected CECcompatible device. "On": When this function is used "Off": When this function is not used When this setting is changed, turn off and then on again the power of all connected devices.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Audio TV Out Off You can enjoy audio through the speakers of the TV while this unit is on. "On": When this function is used "Off": When this function is not used • Listening mode cannot be changed while "Audio TV Out" is set to "On" and audio is being output from the TV. • Depending on your TV or input signal of the connected device, audio may not be output from the TV even if this is set to "On".
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details Pairing Information - You can initialize the pairing information saved on this unit. Pressing ENTER when "Clear" is displayed initializes the pairing information stored in this unit. • This function does not initialize the pairing information on the BLUETOOTH wireless technology enabled device.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Default Value Setting Details USB Power Out at Standby Off When this function is set to "On", electricity can be supplied to the Streaming media player connected to the POWER OUT port even if this unit is in standby mode. • The POWER OUT jack is cannot supply power to smart phones/tablets or other devices.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ AV Adjust Menu operations You can quickly adjust the settings you frequently use, such as tone adjustments, etc. You can make the settings on the TV screen while playing something. Press on the remote controller to display the AV Adjust menu. AV Adjust BD/DVD HDMI Sound Delay Audio Audio Return Channel DSP Level Select the item with the cursor / buttons of the remote controller and press ENTER to confirm your selection.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Audio Sound Retriever: Improve the quality of the compressed audio. Playback sound of lossy compressed files such as MP3 will be improved. The setting can be separately set to each input selector. The setting is effective in the signals of 48 kHz or less. The setting is not effective in the bitstream signals. • It cannot be set if the listening mode is Direct or Pure Direct. Midnight: Make small sounds easily heard.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Initial Setup with Auto Start-up Wizard Operations When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for startup using simple operations following on-screen guidance. 1. Switch the input of the TV to the input connected to the unit. 2. Put batteries into the remote controller of this unit. 3. Press on the remote controller to turn the unit on. 4.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ • To perform the Initial Setup again after the setting is completed, press select "6. Miscellaneous" - "Initial Setup", and press ENTER. , 1. Speaker Setup 1. Select the connected speaker configuration, and press ENTER. Note that the image on the screen changes each time you select the number of channels in "Speaker Channels". Speaker Setup Speaker Channels 5.1 ch Subwoofer Yes Height Speaker --- Select how many speakers you have. ENTER Next 2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Troubleshooting Tuner BLUETOOTH function ZONE B function Remote Controller Display Others Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/ connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ When the unit is operating erratically ❏❏Try restarting the unit Restarting this unit may solve the problem. After turning the unit to standby mode, press and hold the STANDBY/ON button of the main unit for at least 5 seconds, and then restart the unit. (The settings on this unit are kept.) If the problem persists after restarting the unit, unplug and plug the power cords or HDMI cable of this unit and connected devices.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Troubleshooting Power ❏❏When the power is turned on, "AMP Diag Mode" appears on the display of the main unit. • The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an abnormality with the speaker cable connection.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ❏❏No sound from a connected player • Change the input selector on this unit to the position of the terminal to which the player is connected. • Check the digital audio output setting on the connected device. On some game consoles, such as those supporting DVD, the default setting may be off. • For some DVD-Video discs, you need to select an audio output format from a menu.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Listening Modes • To enjoy digital surround playback in formats such as Dolby Digital, you need to make a connection for audio signals with an HDMI cable, digital coaxial cable or digital optical cable. Also, audio output need to be set to Bitstream output on the connected Blu-ray Disc player, etc. • Press on the remote controller several times to switch the display of the main unit, and you can check the input format.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Video • Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct. • Make sure that none of the connecting cables are bent, twisted, or damaged. • When the TV image is blurry or unclear, the power cord or connection cables of the unit may have interfered. In such a case, keep distance between TV antenna cable and cables of the unit.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Tuner ❏❏Poor reception or much noise • • • • • • • • Recheck the antenna connection. Move the antenna away from the speaker cord or power cord. Move the unit away from your TV or PC. Passing cars or airplanes in the vicinity can cause interference. If radio waves are blocked by concrete walls, etc., radio reception may be poor. Change the reception mode to mono ( p41). Operating the remote controller during AM reception may cause noise.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ZONE B function ❏❏Cannot ZONE B-output the audio of externally connected AV components • To output audio to ZONE B, set the audio output destination to "ZONE A+B" or "ZONE B". ( p45) ( p13) Remote Controller • • • • Make sure that the batteries are inserted with the correct polarity. Insert new batteries. Do not mix different types of batteries, or old and new batteries.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ About HDMI Compatible functions transmitted to the TV. HDMI (High Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, digital tuners, and other video components. Several separate video and audio cables have been required to connect AV components so far.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Supported Audio Formats 2 ch linear PCM: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit Multi-channel linear PCM: Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit Bitstream: Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS:X, DTS-HD High Resolution Audio, DTS-HD Master Audio, DTS 96/24, DTS-ES, DTS Express DSD: Supported sampling rates: 2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ General Specifications Amplifier Section Rated RCA Output Level and Impedance 1 V/470 Ω (SUBWOOFER PRE OUT) 1 V/2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ BLUETOOTH Section 40.1 W (No-sound) (North American) 36.1 W (No-sound) (Others) 26.0 W (HDMI Standby Through) (North American) 24.4 W (HDMI Standby Through) (Others) Dimensions (W × H × D) 435 mm × 148 mm × 321 mm 17-1/8" × 5-13/16" × 12-5/8" Weight 8 kg (17.6 lbs.) Maximum radio-frequency power transmitted in the frequency band(s) (European) 2402 MHz - 2480 MHz (4 dBm (e.i.r.p)) Communication system BLUETOOTH Specification version 4.2 Frequency band 2.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Audio Inputs Center speaker (S-13C) Digital OPTICAL (TV) COAXIAL (CD) Analog CD, TV, CBL/SAT, AUX (front) Speaker Type 1-Way, Closed-box bookshelf Drivers 3" (7.7 cm) Cone Frequency Response 70 Hz - 20 kHz Output Sound Pressure Level 80 dB/W/m Maximum Input Power 150 W Normal Impedance 6Ω Dimensions (W × H × D) 220 mm × 97 mm × 100 mm 8-11/16" × 3-13/16" × 3-15/16" Weight 0.6 kg (1.
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Subwoofer (S-13W) Speaker Type Bass-Reflex Drivers 6-7/16" (16 cm) Cone Frequency Response 28 Hz - 5 kHz Output Sound Pressure Level 78 dB/W/m Maximum Input Power 120 W Normal Impedance 6Ω Dimensions (W × H × D) 230 mm × 393 mm × 331 mm 9-1/16" × 15-1/2" × 13-1/16" Weight 4.6 kg (10.1 lbs) Others USB: 1 (Only for supplying power to Streaming media player, 5 V/1.0 A) Specifications and features are subject to change without notice.
SN 29403619A_EN © 2019 Onkyo & Pioneer Corporation. All rights reserved. “Pioneer” is a trademark of Pioneer Corporation, and is used under license.
