Operating instructions

The System Setup menu08
66
En
Chapter 8
The System Setup menu
Using the System Setup menu
The following section shows you how to make
detailed settings to specify how you’re using
the system, and also explains how to fine-tune
individual speaker system settings to your
liking.
1 Switch on the system and your TV.
Use the  SYSTEM button to switch on.
2 Press on the remote control,
then press the
SETUP button.
1
An on-screen display (OSD) appears on your
TV. Use /// and ENTER on the remote
control to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
3 Select the setting you want to adjust.
• Auto MCACC – This is a quick and
effective automatic surround setup (see
Automatically setting up for surround
sound (MCACC) on page 45).
• Manual SP Setup – Specify the number,
distance and overall balance of the
speakers you’ve connected (see Manual
speaker setup below).
Manual speaker setup
These settings are designed to fine-tune your
system, but if you’re satisfied with the settings
made in Automatically setting up for surround
sound (MCACC) on page 45, it isn’t necessary
to make all of these settings.
Caution
• The test tones used in the System Setup
are output at high volume.
1 Select ‘Manual SP Setup’ then press
ENTER .
Note
1 • You can’t use the System Setup menu when the iPod/USB input is selected.
• Press SETUP at any time to exit the System Setup menu.
• The OSD will not appear if you have connected using the HDMI output to your TV. Use composite connections for
system setup.
TOP
MENU
HOME
MENU
PTY SEARCH
AUDIO
PARAMETER
iPod CTRL
MASTER
VOLUME
TOOLS
MENU
RETURN
ST/MONO
SETUP
ENTER
TV CONTROL
CH
INPUT
INPUT SELECT SOURCE
SYSTEM
SYSTEM
TUNER EDIT
System Setup
1.Auto MCACC
2.Manual SP Setup
Return
System Setup
1.Auto MCACC
2.Manual SP Setup
Return
2.Manual SP Setup
Return
a.Speaker Setting
b.Channel Level
c.Speaker Distance
HTP-700_VYXCN_En.book 66 ページ ２００９年９月１５日 火曜日 午前９時４２分