Operating instructions

Connecting up 02
31
En
English Deutsch Italiano EspañolFrançais
Nederlands
Connecting your component with no HDMI terminal
This diagram shows connections of a TV and DVD player (or other playback component) with no
HDMI terminal to the system.
1 Connect the composite video output on
your DVD player to the VIDEO BD/DVD input
on this system.
Use a standard RCA video cable.
2 Connect the audio output on your DVD
player to the AUDIO BD/DVD IN inputs on this
system.
Use a stereo RCA phono cable. If your component
has a digital output, you can also use an optical
cable or coaxial cable for the connection.
1
3 Connect the MONITOR OUT on this system
to the composite video input on your TV.
Use a standard RCA video cable.
1
1 2
1
2 3
VIDEO INVIDEO OUT
ANALOG
RL
AUDIO OUT
DIGITAL OUT
OPTICALCOAXIAL
TV
DVD player, etc.
Select one
Note
1 In this case, you’ll need to tell the system which digital input you connected the component to (see Choosing the input
signal on page 48).
HTP-700_VYXCN_En.book 31 ページ ２００９年９月１５日 火曜日 午前９時４２分