> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others NETWORK CD RECEIVER SYSTEM X-HM76D X-HM76 X-HM86D XC-HM86D NETWORK CD RECEIVER Instruction Manual Before Start What's in the box .......................................................................... 2 Part Names Front Panel ................................................................................... 4 Rear Panel (X-HM76D, X-HM86D, XC-HM86D) ..........................
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others What's in the box Before Start X-HM76D : 12356 X-HM76 : 12456 X-HM86D : 123567 XC-HM86D : 123 E N Indoor FM antenna (1) Main unit (1) Remote controller (RC-945S) (1), Batteries (AAA/R03) (2) Speaker system (2) DAB/FM wire antenna (1) Speaker cable (1.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others E N Non-skid pads (8) 0 The power cord must be connected only after all other cable connections are completed. 0 Connect speakers with 4 Ω to 16 Ω impedance. 0 We will not accept responsibility for damage arising from the connection of equipment manufactured by other companies.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Front Panel Part Names 4 1. Í STANDBY/ON button: Turns the unit on or to standby mode. 2. INPUT button: Switches the input to be played. 3. Play button: :6 : Return to the beginning of the track being played. Press and hold to rewind the track quickly. (CD) Move to the previous track. (USB, Music Server) 59 : Move to the next track.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Rear Panel (X-HM76D, X-HM86D, XC-HM86D) E N 90° 180° 1. Power cord 2. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH enabled device. Adjust their angles according to the connection status. 3. Speaker terminals: Connect speakers with speaker cables. 4. DAB/FM ANTENNA jack: Connect the supplied DAB/FM wire antenna. 5.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Rear Panel (X-HM76) E N 90° 180° 1. Power cord 2. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH enabled device. Adjust their angles according to the connection status. 3. Speaker terminals: Connect speakers with speaker cables. 4. FM ANTENNA jack: Connect the supplied indoor FM antenna. 5.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Remote Controller 1. Í STANDBY/ON button: Turns the unit on or into standby mode. 2. TIMER button: Used to set the time and set the alarm. 3. SLEEP button: Set the sleep timer. When the time set (30, 60, or 90 minutes) has elapsed, the unit switches to standby. If SLEEP button is pressed after setting, the time remaining until sleep is displayed. 4.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Display E N USB Front Song Artist Album FLAC 44.1kHz/24bit 00:01:45 / 00:03:23 1. The input mode is displayed. (USB Front / USB Rear / CD / Bluetooth / Network / Digital In / Line / Tuner DAB ＊ / Tuner FM) ＊X-HM76D, X-HM86D, XC-HM86D 2. The name of the file, artist, album, station, etc., is displayed. 3. Displays the play status. 4.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Speakers System (X-HM76D, X-HM76) E N There is no distinction between left and right with the included speaker system. There will be no difference in sound quality whichever side you choose to put each speaker. 2 1 1 2 6. Speaker terminals: Connect speakers to the main unit with speaker cables. 1. Tweeter: Plays the mid range and treble. 2. Woofer: Plays the bass. 3.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Speakers System (X-HM86D) E N There is no distinction between left and right with the included speaker system. There will be no difference in sound quality whichever side you choose to put each speaker. 1. Tweeter: Plays the mid range and treble. 2. Woofer: Plays the bass. 3. Grill net fittings: Used to attach the grill nets.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Connect the Speakers Install 1 a a When connecting the speaker system for X-HM76D, XHM76 or X-HM86D, connect the included speaker cables with ends with the red tubing attached to the i jacks on the main unit and the speaker. If connection is wrong, the phase reverses and this makes it harder to output bass. For XC-HM86D, use the illustration as a reference to connect your own speakers.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Connecting the antennas and power cord, etc. X-HM76D, X-HM86D, XC-HM86D Antenna Hookup X-HM76 1 1 Move the antenna around while playing the radio to find the position with the best reception. Power Cord Hookup Connect the power cord to the power outlet after completing all other connections.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Power On & Initial Setup Initial Setup 1 Starting up: When you press Í STANDBY/ON, the power indicator on the main unit slowly blinks blue, then "Hello" is displayed on the display about 20 seconds later. After this, the display goes blank, then after the Pioneer logo is displayed, you can start operating the unit.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others To make Wi-Fi settings, select "Wi-Fi". If you have connected with an ethernet cable, select "Wired(Exit)" and confirm. If you select "Wi-Fi", select the method for setting in the next screen (for example "Scan Networks"). Wireless Enter Password XXXXXX". 3. After establishing the connection, select "Done" on the screen of the iOS device. 4.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others E N 15
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Time settings 1 By setting the time, you can use the alarm to start play (ÄP33). 1. Press TIMER. CLOCK Sun 0:00 2. Press ENTER. 3. Set the day of the week with w/x, then press ENTER. 4. In the next screen, use w/x to select either "24H" (24-hour display) or "12H" (12-hour display) and press ENTER. 5. In the next screen, set the time with w/x, then press ENTER. 6.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Playing CDs Playback 1 a b This unit can also play CD-R recorded with MP3 or WMA format files, along with commercially available music CDs. 0 The supported sampling rates for MP3 files are 8 kHz to 48 kHz, and supported bitrates are between 64 kbps and 384 kbps. 0 The supported sampling rates for WMA files are 32 kHz, 44.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others a b c d Playing MP3/WMA discs Program play (Music CDs) 1. Turn the unit on. 2. Press CD to change input to CD. 3. Press < on the main unit to open the disc tray. 4. Put the disc on the tray, then press < to close the tray. 5. When reading of the disc is complete, the numbers of folders containing MP3/WMA files and track numbers are displayed. You can program up to 32 tracks to play. 1.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others USB Storage Device/HDD Basic operations 1 a E N You can play music files by connecting a USB storage device or HDD (hard disk drive) to the USB port on the front or rear of the unit. 0 The USB port on the front supports a maximum 5 V/0.5 A power supply. If the HDD requires more than this, connect to the USB port (maximum 5 V/1 A) on the rear of the unit. 1. Turn the unit on. 2.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others DSD (DSF only) format music files. The formats for embedded images are JPEG and PNG. 0 Characters that cannot be displayed by this unit appear as "¢". 0 The USB port of this unit conforms with the USB 2.0 standard. The transfer speed may be insufficient for some content you play, which may cause some interruption in sound. Repeat/Shuffle 1.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Internet Radio Basic operations 1 E N When this unit is connected to a network, you can listen to TuneIn or other preregistered Internet radio services. Depending on the internet radio service, the user may need to register from their computer first. 1. Turn the unit on. 2. Press NETWORK. Network TuneIn Radio a Spotify Deezer TIDAL b c 3.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Spotify Basic Operation 1 a Wi-Fi b c d 2 3 4 Pioneer HMXX xxxxxx 22 Spotify Connect play is possible by connecting this unit to the same network as a smart phone or tablet. To enable Spotify Connect, install the Spotify application on your smartphone or tablet and create a Spotify premium account. 1. Connect the smartphone to the network that this unit is connected to. 2.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Listening to the FM Radio 1 Tuning Automatically a d b c e E N 1. Turn the unit on. 2. Repeatedly press TUNER to switch input to Tuner FM. Tuner FM AUTO 87.50 d MHz f e 3. When you press TUNE i/j (b) on the remote controller, automatic tuning starts, and searching stops when a station is found. "Tuned Stereo" or "Tuned Mono" is displayed when FM stations are being received.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Selecting registered stations 1. Repeatedly press TUNER to switch input to Tuner FM. 2. Press PRESET i/j (a) on the remote controller to select a preset number. Tuner FM 87.50 MHz 3. Select the station you want to listen to while pressing TUNE i/j (b) on the remote controller. 0 The frequency changes by 1 step each time you press the button.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Folk music Documentary 0 The information displayed may sometimes not match the content being broadcast by the station. 3. "FINISH" is displayed when a station is found and the frequency display flashes. Press ENTER (g) while this is happening to start receiving that station. If you don't press ENTER (g), the unit continues to search for another station.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Listening to DAB Digital Radio (X-HM76D, X-HM86D, XC-HM86D) Tuning 1 Tuner DAB 1. Turn the unit on. 2. Repeatedly press TUNER to switch input to Tuner DAB. 0 The very first time you select Tuner DAB, the Auto Tuning function automatically scans the DAB Band 3 for the multiplexes (i.e., stations) available in your area.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others BLUETOOTH® Pairing Pairing Playing Back 1 E N 1. Turn the unit on. 2. When you press the button on the remote controller, "Now Pairing... " is displayed on the display, and the pairing mode is enabled. 1 Bluetooth Now Pairing... --:--:-- / --:--:-- 2 Pioneer HMXX xxxxxx 2 Pioneer HMXX xxxxxx 3.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others 4. Play the music files. Increase the volume of the BLUETOOTH enabled device to an appropriate level. 0 Due to the characteristics of BLUETOOTH wireless technology, the sound produced on this unit may slightly be behind the sound played on the BLUETOOTH enabled device.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others AirPlay® 1 Basic Operation 3 Wi-Fi iPhone Pioneer HMXX 2 4 E N You can wirelessly enjoy the music files on an iPhone®, iPod touch®, or iPad® connected to the same access point as this unit. Update the OS version on your iOS device to the latest version. 1. Turn the unit on. 2. Connect the iOS device to the same network as this unit. 3.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Playing audio from an external device Connections 1 3. Start play on the player. 0 When connected by a digital optical cable, this unit supports linear PCM signals of up to 192 kHz/24 bits for input. a b Playing Back 1. Turn the unit on. 2. When playing a device connected to the DIGITAL IN OPTICAL terminal, press LINE/DIGITAL repeatedly to change the input on this unit to "Digital In".
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Music Server It is possible to stream music files stored on PCs or NAS devices connected to the same network as this unit. The network servers this unit is compatible with are those PCs with players installed that have the server functionality of Windows Media® Player 11 or 12, or NAS that are compatible with home network functionality.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others You can use this unit to play music files stored on your PC by operating the PC inside your home network. The unit supports remote playback with Windows Media® Player 12. 1. Turn on your PC and start Windows Media® Player 12. 2. Open the "Stream" menu and check that "Allow remote control of my Player..." is checked. Click "Turn on media streaming" to list players in the network. 3.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Using the alarm to start play Settings At the set time, the unit switches on and starts play of the desired source. You can set two different timers, "TIMER 1" and "TIMER 2". Make sure that the clock on this unit is set correctly. You cannot use the timers if the clock has not been set. 1. Press and hold TIMER for 2 seconds. TIMER 1 6.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Entering text, adjusting sound quality, etc. a Entering text Emphasizing the low range (P.BASS) Text entry, for passwords, etc., uses the following remote controller buttons. 1. Press SOUND button (g) three times. 2. Press w/x buttons (d) to select "On" and press ENTER (e). SHUFFLE/REPEAT button (a): Each press changes text type in the order upper case → lower case → numbers → symbols.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Advanced Settings Advanced Setup 1 The unit allows you to configure advanced settings to provide you with an even better experience. 1. Press SETUP on the remote controller. E N Setup Network Setting Option Setting System Info Factory Reset 2.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Make Wi-Fi connection settings. (ÄP13) This can be set only when "Wi-Fi" is selected in "Connection". 0 You can make Wi-Fi connection settings using a web browser on a computer. For details, refer to “Web Setup” (ÄP38). For details on how to enter text, refer to "Entering text" (ÄP34). After finishing input, press ENTER. ■ DHCP You can check the network connection.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Select the language displayed on the display. English (Default Value), German, French, Spanish, Italian, Dutch, Swedish, Russian, Chinese Bluetooth Select whether or not to use the BLUETOOTH function. "On" (Default Value): Enables connection with a BLUETOOTH enabled device by using the BLUETOOTH function. Select "On" also when making various BLUETOOTH settings.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Factory Reset Reset the settings of this unit to the status at the time of shipment. We recommend that you take a note of the settings you have changed before going ahead with a factory reset. Select "Start" and confirm to go ahead. The unit will be placed on standby automatically when initializing is completed. Update "Update" is not displayed if there are no firmware updates.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Firmware Update Firmware Update The updating function on this unit How to update This unit has functionality to update the firmware (the system software) over a network or by the USB port. This enables us to make improvements to a variety of operations and to add features. There are two methods for updating the firmware: via network and via USB.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others 0 ＊ -01, ＊ -10: Ethernet cable not found. Connect the Ethernet cable properly. 0 ＊-02, ＊-03, ＊-04, ＊-05, ＊-06, ＊-11, ＊-13, ＊-14, ＊16, ＊-17, ＊-18, ＊-20, ＊-21: Internet connection error. Check the following: – The router is turned on – This unit and the router are connected via the network Try to disconnect and then connect again the power to the unit and router. This may solve the problem.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Troubleshooting Others Before starting the procedure When operation is unstable, problems may be solved by simply turning the power on or to standby or disconnecting/ connecting the power cord, rather than reviewing settings and operations. Try the simple measures on both the unit and the connected device.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Cannot play discs 0 Place the disc in the disc tray so the label is facing up. 0 Play may not be possible if the disc is scratched or dirty. Cannot Play USB storage device / HDD 0 Check whether the USB storage device or USB cable is correctly inserted to the USB port of the unit. 0 Disconnect the USB storage device from the unit, and then try reconnecting.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others device is set low, the playback of audio may be unavailable. Turn up the volume on the BLUETOOTH enabled device. 0 Some BLUETOOTH enabled devices may be equipped with a Send/Receive selector switch. Select Send mode. E N Sound is interrupted 0 There may be a problem with the BLUETOOTH enabled device. Check the information on the internet.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others General Specifications Analog Audio Output Section RMS Output Power 0 X-HM76D, X-HM76 : 50 W + 50 W 0 X-HM86D, XC-HM86D : 65 W + 65 W (4 ohms, 1 kHz THD 10%) Tone Control Characteristics 0 w10 dB (100 Hz (BASS)) 0 w10 dB (10 kHz (TREBLE)) CD Section Media/Format 0 CD : Standard CD 0 CD-R/RW : CD format/MP3, WMA File Digital Audio Input Front/Rear USB 0 Type A, USB2.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others Dimensions (W t H t D) 0 290 mm t 98 mm t 333 mm Weight 0 3.5 kg Speaker (X-HM76D, X-HM76, X-HM86D) Type 0 Bass-reflex bookshelf type Dimensions (W H D) 0 X-HM76D : 148 mm t 263 mm t 217 mm 0 X-HM76 : 148 mm t 263 mm t 213 mm 0 X-HM86D : 165 mm t 280 mm t 259 mm E N Weight 0 X-HM76D : 3.4 kg/each 0 X-HM76 : 3.3 kg/each 0 X-HM86D : 4.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others License and Trademark Information BLACKFIRE The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance®. This Mark Certifies that this product is compliant with the BLACKFIRE ALLIANCE Standard. Please refer to WWW.BLACKFIREALLIANCE.COM for more information. BLACKFIRETM is a Registered Trademark (No. 85,900,599) of BLACKFIRE RESEARCH CORP. All rights reserved.
2-3-12 Yaesu, Chuo-ku, Tokyo 104-0028 JAPAN 18 PARK WAY, UPPER SADDLE RIVER, NEW JERSEY 07458, U.S.A. Tel: 1-201-785-2600 Tel: 1-844-679-5350 Hanns-Martin-Schleyer-Straße 35, 47877 Willich, Germany Tel: +49(0)2154 913222 E N Anteros Building, Odyssey Business Park, West End Road, South Ruislip, Middlesex, HA4 6QQ United Kingdom Tel: +44(0)208 836 3612 6, Avenue de Marais F - 95816 Argenteuil Cedex FRANCE Tel: +33(0)969 368 050 Корпорация О энд Пи 2-3-12, Яэсу, Чуо-ку, г.
