Installation guide

<CRD4324A/U> 11
10
ENG/MASTER 96
English
Español
Deutsch
Français
Italiano
Nederlands
(*8)
Blue (*6)
RCA connector 1 16 cm
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect *6 and
*7 when Pin 5 is an aerial control type. In
other types of vehicle, never connect *6 and *7.
Blue (*7)
To auto-aerial relay control terminal.
If the vehicle has a glass antenna, connect to
the antenna booster power control terminal
(max. 300 mA 12 V DC).
Yellow/black (MUTE)
If you use equipment with a mute function, connect that equipment to the
Audio Mute lead. If not, keep the Audio Mute lead free of any connections.
Power cord
Note:
Audio source will be set to mute or attenuate, while the following sounds
will not be muted or attenuated. For details, see the operation manual.
- voice guidance of the navigation
- incoming ringtone and incoming voice of the mobile phone that is
connected to this navigation system via Bluetooth wireless technology
The navigation unit
Note:
The aerial will automatically retract or turn off, yet the
timing varies depending on the setting. (Refer to page
5.)
For more detailed information on changing the “Auto
ANT” mode, refer to “Switching the auto aerial
setting” in the operation manual.
02_CRD4324-A_inst_001_029_UK 08.1.28 2:56 PM Page 11
<CRD4324-A> 11