User Manual

Black plate (14,1)
Specifications
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system ................... Negative type
Current consumption ............ 15 A (at continuous power,
4 W)
Average current consumption
..................................................... 1.7 A (4 W for four channels)
1.7 A (4W for two channels)
1.7 A (2W for four channels)
Fuse ................................................ 15 A
Dimensions (W × H × D) ... 181 mm × 38 mm × 64 mm
(7-1/8 in. × 1-1/2in. ×
2-1/2 in.)
Weight .......................................... 0.55kg (1.2 lbs)
(Leads for wiring not in-
cluded)
Maximum power output ....... 100 W × 4 (at 14.4 V, 4 W)/
200 W × 2 (at
14.4 V,4WBRIDGE)
Continuous power output ... 45 W × 4 (at 14.4 V, 4 W,20
Hz to 20 kHz, ≦ 1% THD)
90 W × 2 (at 14.4 V, 4 W
BRIDGE, 1 kHz, ≦ 1% THD)
45 W × 4 (at 14.4 V, 2 W,1
kHz, ≦ 1% THD)
Load impedance ...................... 4 W (2 W to 8 W allowable)
Frequency response ............... 10 Hz to 40 kHz (+0 dB,
–3 dB)
Signal-to-noise ratio ............... 90 dB (IHF-A network)
Distortion ..................................... 0.05 % (4 W, 1 kHz)
Low pass filter:
Cut off frequency ........... 80 Hz
Cut off slope ..................... –12 dB/oct
High pass filter:
Cut off frequency ........... 80 Hz
Cut off slope ..................... –12 dB/oct
Gain control:
RCA ...................................... Fixed 28 dB
Speaker .............................. Fixed 8 dB
Maximum input level / impedance:
RCA ...................................... 1.0 V / 22 kW
Speaker .............................. 10.0 V / 22 kW
CEA2006 Specifications
Power output ............................. 45 W RMS × 4 Channels (at
14.4 V, 4 W and ≦ 1 % THD
+N)
S/N ratio ....................................... 74 dBA (reference: 1 W into
4 W)
Notes
! Specifications and the design are subject to
modifications without notice.
! The average current consumption is nearly
the maximum current consumption by this
unit when an audio signal is input. Use this
value when working out total current con-
sumption by multiple power amplifiers.
En
14
Appendix
Additional information


5707000009391V<14>