Owner's Manual
(_
c_o_n_n_e
_c_
ti
_n_g_t_h_e_u_n_i_
ts
_~)
Connecting
the
speaker/
subwoofer
output
terminals
1
Use
wire
cutters
or
a utility knife
to
strip the end
of
the speaker/subwoofer
wires
to
expose about 10
mm
(3/8
in.)
of
wire
and then
twist
the
wire.
Tw
ist
------,~
I· 1 • I
10mm
(3/8
i
n.
)
2 Connect the speaker/subwoofer wires
to
the speaker/subwoofer
output
term-
inals.
Fi
x
the
wires
securely
with
the
terminal
sc
rews.
CD
Terminal screws
Tighten
the
screws with a
1.
5
mm
(1
/8 in.)
hexagonal wrench
for
terminal screws
of
the speaker and a 3
mm
(1/8 in.) hexagonal
wrench
for
terminal screws
of
the
subwoo-
fer.
@ Speaker wires
® Speaker output terminals
® Subwoofer wires
® Subwoofer output
terminals[!]
En
(_
l_
ns
_t_
a_lla
_
t_io_n
_____
)
Before installing
the
amplifier
AwARNING
•
To
ensure proper installation, use
the
supplied
parts in the manner specifi
ed.
If any parts
other than those supplied are used, they may
damage internal parts
of
the amplifier,
or
be
-
come loose causing the amplifier
to
shut
down.
• Do
not
install in:
- Places where it could injure the
dr
iver
or
passengers if
the
vehicle stops suddenly.
- Places where it may interfere with the
dr
i-
ver,
such as on the floor in front
of
the
dri-
ver's seat.
• Install tapping screws in such a way
that
the
screw tip does
not
touch any wire. This is im-
portant to prevent wi
res
from being
cut
by
vi
-
bration
of
the car, which can result in fi
re.
• Make su
re
that wires do not get caught in the
sliding mechanism of the seats
or
touch the
legs
of
a person in the vehicle as short-circuit
may result.
• When drilling
to
install the amplifier, always
conf
irm no parts are behind the panel and
protect all cables and important equipment
(e.g. fue
l/
brake lines, wiring)
from
damage.
AcAUTION
•
To
ensure proper heat dissipation
of
the
ampli-
fier, ensure the following
dur
ing installation:
- All
ow
adequate space above the
amp
lifier
for
proper ventilation.
- Do not cover the amp I ifier with a floor
mat
or
carpet.
• Place all cables away from hot places, such
as near the heater outlet.
• The optimal installation location differs de-
pending on the
car
mode
l.
Secure
the
ampli-
fier
at
a sufficiently rigid location.
• Check all connections and systems before
final installation.
• After installing the amplifi
er,
confirm
that
the
spare tire,
ja
ck and tools can be easily r
e-
moved.
C!J