Owner's Manual

(_s_e_tt_in_g_t_h_e_u_n_it ____ )
Relationship between amplifier gain
and head unit output power
Head unit volume steps Head unit volume steps
Amplifier gain -----. Amplifier gain
(normal) (maximum)
If amplifier gain is raised improperly, this will
simply increase distortion, with little increase
in power.
Signal waveform when outputting at
high volume using amplifier gain
control
Normal gain ! Maximum gain !
Signal
waveform
• • • • • Equal power • • •
Signal
waveform
Amplifier gain -----• Amplifier gain
(normal) (maximum)
If the signal waveform is distorted due to high
output, even if the amplifier gain is raised, the
output power wi 11 change only slightly.@
En
(
Conneding the units )
-- ----~
Connection diagram
CD
V
CD Battery wire (sold separately)
@)
• The maximum length of the wire be-
tween the fuse and the positive 8, term-
inal of the battery is 30 cm (12 in.).
• For the wire size, refer to Connecting the
power terminal. The battery wire, the
ground wire and the optional direct
ground wire must be same size. After
making all other connections at the am-
plifier, connect the battery wire terminal
of the amplifier to the positive 8, term-
inal of the battery.
® Fuse (100 A) (sold separately)
Each amplifier must be separately fused at
100A.
@ Positive 8, terminal
@ Negative (8) terminal
® Battery (sold separately)
® Ground wire, Term inal (sold separately)