enginno_usergd.r1.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 2 Contents Quick Start 1. Charge battery for at least 8 hours (page 12). 2. Set up your inno™ (page 20). 3. Activate your XM subscription (page 18). 4. Listen to and record live XM* (pages 26 and 33). 5. Listen to recorded content (page 37). 6. Buy songs from XM+Napster (page 55). 7. Manage your songs and playlists from your computer (page 56). Introduction ...................................... 4 Features ....................................................
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 4 Introduction Introduction Features inno™, Undocked Congratulations on your purchase of the Pioneer inno™. It’s the next-generation XM2go® radio, with an XM receiver, built-in antenna, and storage for XM, MP3, or WMA music files in one portable device.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 6 Introduction Introduction inno + Dock + Antenna + PC ■ Manage content using inno or your PC ■ Listen to XM Radio Online ■ Purchase music from XM+Napster and upload it to your inno Safety Instructions Please read and understand all the instructions to avoid injury to yourself and/or damage to your inno. Please be aware that Pioneer claims no responsibility for damage from data loss due to breakdown, repair, or other causes.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 8 Introduction Introduction Battery Charger Safety Protect Your Ears Caution: Opening the case may result in electric shock. Caution: The uninsulated parts inside the power adapter and dock may cause electric shock or fire. For your safety, please do not open these components. Do not let metallic objects, such as necklaces or coins, come into contact with the power adapter plugs or battery terminal.
enginno_usergd.r1.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 12 Introduction Introduction Charging the Battery inno Controls Charge the battery for at least 8 hours before using inno for the first time, or if you have not used it for several months. Be sure to charge the battery in a place where the temperature is between 32°F and 113°F (0°C to 45°C). USB jack Display Mode – Switch between “Live XM” or “My Music” (recorded content). 2. Insert battery into player. 1. Open battery compartment.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 14 Introduction Introduction inno Controls Using This Guide Throughout this guide, you will see instructions such as “Select XM ➝ Settings ➝ Setup ➝ Antenna Aiming.” This tells you to perform the following actions: When you put inno in its home dock, both the display and arrow buttons rotate by 90° so that “up” really points up! 1. Press the XM button. 2. You will see a menu whose last option is “Settings.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 16 Introduction Introduction inno Display Remote Available memory or signal strength – Green portion indicates amount of storage taken up by locked XM songs (page 40). In “Live XM” mode, you will see a signal strength indicator instead. Indicates XM channel, playlist, or MP3 genre. Battery charge Power button Mode – (((XM))) shows you’re listening to live XM. (((My Music))) shows you’re listening to stored XM content or MP3/WMA tracks.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 18 Subscribing to XM Before you can listen to or record XM content, you must activate your inno. Product registration 1. Set up your inno, dock station, power adapter, and antenna (page 20 or page 22). Make sure inno can receive the XM signal. Visit us at the following site: 2. Place inno in the “Live XM” mode (page 26). 3. Find the 8-character XM Radio ID, which is printed on the package or in the battery compartment underneath the battery.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 20 Using Your inno Alone Using Your inno Alone Setup To AC power adapter At Home 1. Insert inno into home dock. 2. Connect inno to your audio system as shown. If your audio system does not have a line-level input, use inno’s built-in FM transmitter (page 66). Connect power adapter and home antenna. Point antenna toward the southern sky through a window.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 22 Using Your inno Alone Using Your inno Alone Setup 2. Insert inno into car dock. In a Vehicle (requires Car Accessory Kit CD-INCAR1, sold separately) 3. Connect car dock to antenna cable and power adapter. Every vehicle is different; for your safety, follow all instructions carefully. Consult a professional installer if you have questions. You can listen to your inno through your car stereo by using inno’s built-in FM transmitter.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 24 Using Your inno Alone Using Your inno Alone 4. To install the swivel mount, first find a suitable location. The swivel mount’s adhesive is very strong and may be difficult to remove. Do not install this mount on leather surfaces and make sure the air temperature is at least 60°F (15°C). 5. To install the vent mount, find a horizontal vent that is strong enough to hold your inno and dock.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 26 Using Your inno Alone Using Your inno Alone Live XM ✍ NOTE: You must receive a live XM signal for at least 8 hours a month (which may be split over several listening sessions). This authenticates your XM subscription and ensures that you can continue to enjoy your recorded XM content and live XM programming. If you do not dock your inno as described, you will lose access to your recorded content and live XM programming.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 28 Using Your inno Alone Using Your inno Alone Favorite Channels TuneSelect™ You can save your favorite channels in an easily accessible list. TuneSelect™ finds your favorite artist or song whenever they’re currently being played on any XM channel. 1. While you’re tuned to a channel, press the XM button. 2. Select Favorites ➝ Add Channel. 3. Once you’ve saved your favorites, you can quickly access the list.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 30 Using Your inno Alone Using Your inno Alone TuneSelect also allows you to type an artist name or song title even if the song isn’t currently playing on your inno. 1.Select XM ➝ Settings ➝ Preferences ➝ TuneSelect ➝ Edit List ➝ Add TuneSelect. 2. Press the up or down arrow buttons to choose the artist or song title field. Info Extras XM Satellite Radio broadcasts information such as sports scores, stocks, and other features from time to time.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 32 Using Your inno Alone Using Your inno Alone 4. Continue selecting letters by using the arrow and XM buttons. Recording XM 5. Select “Enter” when you’ve entered the entire stock symbol. Your inno is smart enough to automatically complete some stock symbols. Your inno enables you to record XM content for personal, non-commercial use. You may record XM content while listening to live XM or by scheduling a recording session.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 34 Using Your inno Alone Using Your inno Alone Recording a Channel Scheduling a Recording Session 1. While you’re listening to live XM, select XM ➝ Record ➝ Rec Channel. You will record the channel you’re currently listening to. You can set inno to record XM at a later time. When you schedule a recording session, remember that inno must be able to receive a live XM signal when the session begins. 2.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 36 Using Your inno Alone 3. To edit an existing session, select XM ➝ Record ➝ Schedule Recording. You will see a list of sessions. Highlight the session you wish to edit. Using Your inno Alone Listening to Recorded XM Content (My Music) When you see “My Music” at the top of the display, you’re listening to XM content that you have recorded and any MP3/WMA files you have transferred to your inno. 1. To switch to “My Music” from “Live XM,” press the Mode button. 2.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 38 Using Your inno Alone Using Your inno Alone Organizing Your Music Finding Your Music All songs and tracks that are stored in your inno are normally played in the order that they were recorded or transferred into your inno. You can also sort the selections by artist, category, or channel. 1. While listening to recorded tracks in “My Music,” select XM ➝ Find. Shows the artist’s songs in the order they were recorded.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 40 Using Your inno Alone Using Your inno Alone Locking and Unlocking XM Content Playlists – Adding Songs When you record XM, your inno records over the oldest XM tracks first. This ensures that you always hear the latest XM content. You can “lock” a song or track to prevent inno from recording over it. Locked songs occupy memory on your inno and reduce your available recording time.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 42 Using Your inno Alone Using Your inno Alone Playlists – Removing Entries Playlists – Playing You can remove entries from a playlist. Remember that removing a song from one playlist does not remove it from any other playlist, and does not delete that song from inno. 1. Select XM ➝ Playlists ➝ (playlist name) ➝ Select. To remove one or more songs from a playlist: 3. You will see the following options: 2.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 44 Using Your inno Alone Using Your inno Alone Playlists – Other Options Bookmarking Songs Normally, the songs in a playlist appear in the order that they were added. “Bookmarks” are a great way to remember interesting songs. You can view all your bookmarks through the XM+Napster application, look up information about the artist or album, or purchase a complete, high-fidelity version of the song that you may play on multiple devices through XM+Napster.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 46 Using Your inno Alone Using Your inno Alone Deleting Songs To delete multiple songs from “My Music”: When you’re no longer interested in a song or track, you can delete it from your inno. “Deleting” a song permanently erases it from memory, and is different from “removing” a song from a playlist. 1. Select XM ➝ Organize ➝ Songs. To delete one song from “My Music”: 3. Select XM ➝ Select Song. The song’s name will be displayed in green. 1.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 48 Using inno with a PC Using inno with a PC System Requirements Setup The inno will not work with all computers. We recommend reading this entire section before using your inno with a PC. The PC system must meet the following requirements: To connect your inno to your PC: ■ Intel® Pentium®- class CPU 1. If you haven’t done so already, disconnect your inno and its dock from your PC.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 50 Using inno with a PC Using inno with a PC 4. Reboot your PC if necessary, then launch the XM+Napster program from the shortcut on your desktop. 5. Set up inno as shown and plug the USB cable into the PC. You can also connect the USB cable directly between your PC and inno without using the home dock, home antenna, and AC power adapter. WARNING: Only use the USB cable supplied in the package.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 52 Using inno with a PC To register, follow these steps: 1. Click File/Sign In on the XM+Napster application. Click on the link for new members. 2. Follow the directions indicated on the registration screen. You must provide your active XM Radio ID and billing ZIP code to register. Using inno with a PC 3. If you choose XM+Napster, you must provide a valid credit card.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 54 Using inno with a PC Using inno with a PC What Can You Do with XM+Napster? Purchasing Music Using XM+Napster, you can: The XM+Napster store allows you to stream, download, or buy songs or albums. ■ Manage songs, playlists, and recording sessions on your inno. ■ Stream – Listen to a song while your PC is connected to the Internet. ■ Transfer MP3 and WMA files between inno and your PC.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 56 Using inno with a PC Using inno with a PC Organizing Your Music Recording Sessions The “Folder” pane lets you view the tracks stored on inno or on your PC, playlists, recording sessions, bookmarks, and more. Click on the desired folder to see its contents on the main pane. View and edit your inno recording sessions by selecting Library/inno/XM Recordings on the XM+Napster application. The main pane shows the contents of a folder.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 58 Using inno with a PC Using inno with a PC Playlists Transferring Between PC and inno You can manage your inno playlists using XM+Napster. Simply dock your inno, then select Library/inno/Playlists. You can create new playlists, or edit or delete any playlists that are stored in your inno.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 60 Using inno with a PC Using inno with a PC Disconnecting Your inno From the PC Listening to XM Radio Online (XMRO) Before you remove your inno from its dock or unplug the USB cable from the dock or the PC, you must disconnect using one of the following methods: XM Radio Online gives you access to over 75 channels of the same amazing programming you hear on XM Satellite Radio, plus 10 select AOL Radio channels for even more choice.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 62 Using inno with a PC Using inno with a PC Using Your CDs or MP3/WMA Files Burning CDs Use the XM+Napster application to rip tracks from a CD into your Napster library. Transfer MP3 and WMA files onto a recordable CD or DVD. Please note that the content recorded from XM cannot be burned onto a CD or DVD or otherwise transferred off your inno. 1. Insert an audio CD into your PC’s CD drive. 1. Insert a recordable CD or DVD into your PC’s CD/DVD drive. 2.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 64 Updating inno Firmware Updating inno Firmware Occasionally we make improvements to the inno firmware, which is the software that makes your inno work. Updating the firmware is a quick and easy process. Remember that: ■ Your inno must be docked with a power adapter and must be connected to your PC. You cannot update the firmware if inno is not docked and powered.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 66 Settings Settings FM Modulator FM Frequency Set the FM frequency that inno transmits on. Your inno contains a built-in FM modulator (or FM transmitter) that allows you to listen to whatever your inno is playing using an ordinary FM radio. All you have to do is set your inno and the FM radio to the same frequency. 1. Place inno in the home or car dock. 2. Find an unused FM frequency on your FM radio. Note that FM frequency.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 68 Settings Settings FM Level Aiming the Antenna When listening to your inno using the FM modulator, you can adjust its volume level to match other audio sources (your CD player, other FM stations, or MP3 player). For optimal reception of XM’s live satellite signal, your inno antenna should have an unobstructed view of the XM satellites in the southern sky. In large cities, XM also has a network of ground repeaters to help increase the signal coverage. 1.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 70 Settings Settings Audio Display Tone Brightness and Contrast You can adjust the audio tone quality to suit the kind of music you’re listening to. To change the screen’s brightness and contrast: 1. Select XM ➝ Settings ➝ Preferences ➝ Set Tone. 1. Select XM ➝ Settings ➝ Preferences ➝ Change Display ➝ Brightness. 2. Press the up or down arrow buttons to select either “Bass” or “Treble.” Adjust the tone settings by pressing the left or right arrows. 2.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 72 Settings Settings Stock Ticker Channel Access If you created a stock ticker, you will see stock symbols and their prices displayed at the bottom of inno’s display. You can control the way the ticker is displayed. Direct Tune 1. Select XM ➝ Settings ➝ Preferences ➝ Change Display ➝ Display Appearance ➝ Stock Ticker.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 74 Settings Settings Channel Skip/Add You can simplify the list of channels that you see when you press the up and down arrow buttons. To skip a channel: Clock and Sleep Timer Time 1. Select XM ➝ Settings ➝ Preferences ➝ Channel Access ➝ Channel Skip/Add. 1. The time is automatically set using the XM signal. Select XM ➝ Settings ➝ Setup ➝ Set Time ➝ Set Clock ➝ Select Time Zone to set the correct time zone for your location. 2.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 76 Settings Settings Vehicle Mode Memory Partition If you listen to your inno in a vehicle, you’ve probably plugged the power adapter into the cigarette lighter socket. In some vehicles, the cigarette lighter is turned on or off with the ignition key; in other vehicles, the cigarette lighter is powered all the time.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 78 Settings Restoring Factory Defaults To restore all inno settings and preferences to a “factory fresh” state: 1. Select XM ➝ Settings ➝ Setup ➝ Factory Defaults. 2. You should see this display: Restore just the settings to factory defaults. Restore settings to factory defaults and erase all music. 3. Confirm by selecting Yes, or cancel by selecting No.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 80 Customer Support Customer Support Troubleshooting Troubleshooting If your inno does not work the way you expect, first consult this troubleshooting guide. To reset your inno, remove the battery then re-insert it. If you see this on the display: You should: No Signal Something is blocking the XM signal. Move your inno away from the obstructed area (e.g., an underground garage). Antenna Plug the antenna into the home or car dock.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 82 Customer Support Customer Support Troubleshooting Specifications If this happens: You should: inno Player inno does not communicate with your PC. Check the power and USB connections between the dock and your PC. Be sure to use the supplied USB cable; any others may prevent your inno from charging or communicating properly with your PC. Remove your inno from its dock station, then re-insert. Dimensions 56 mm (W) x 94 mm (H) x 16 mm (D) 2.2 in (W) x 3.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 84 Customer Support Customer Support Patent Information Specifications Remote Dimensions 39 mm (W) x 95 mm (H) x 12 mm (D) 1.5 in (W) x 3.7 in (H) x 0.47 in (D) Weight 40 g 1.4 oz Battery Type: CR2032 Voltage: 3 V Model Numbers inno player GEX-INNO1 Home kit CD-INHOME1 Car accessory kit CD-INCAR1 Technology.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 86 Customer Support Customer Support FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 88 Customer Support PRODUCT WARRANTY PERIOD Portable Satellite Radio……………………………...… 1 Year Parts & Labor Portable Satellite Radio Battery……………………… 90 Days Parts & Labor The warranty period for retail customers who rent the product commences upon the date product is first put into use (a) during the rental period or (b) retail sale, whichever occurs first.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 90 Customer Support Customer Support On all complaints and concerns call Customer Support at 1-800-421-1404 DISPUTE RESOLUTION Following our response to any initial request to Customer Support, should a dispute arise between you and Pioneer, Pioneer makes available to you, without charge, it’s Complaint Resolution Program.
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 92 PIONEER ELECTRONICS SERVICE, INC. P.O. BOX 1760 LONG BEACH, CALIFORNIA 90810 1-800-421-1404 http://www.pioneerelectronics.com XM respects copyrights. This device is for personal use only. XM Programming stored on the device cannot be transferred off the unit. Download legally. Buy digital music from XM+Napster. The XM name, related logo, and TuneSelect are trademarks of XM Satellite Radio Inc. All rights reserved.
