Stereo System User Manual

This indication shows the number of tracks in the se-
lected group.
3 Press the corresponding number button
to select the desired group title.
That selection will begin to play.
Note
You can also use c, d and a to select and play
the desired group title.
Pausing MD playback
Pause lets you temporarily stop playback of
the MD.
1 Press FUNC and then press PAUSE to se-
lect the pause mode.
2 Press PAUSE to turn pause on.
The light illuminates. Play of the current track
pauses.
# To turn the pause off, press PAUSE again.
Note
You can also turn pause on or off by pressing
PAUSE in the following display.
Using disc title functions
When playing an MD, you can switch text dis-
play such as disc title and track title. When
the text is longer than 32 letters, you can scroll
the text to the left so that the rest of the title
can be seen.
1 Press TITLE to switch the title mode.
2 Press the corresponding button to dis-
play the desired title.
FORM1 and FORM3
Button Operation
D.TTL Displays disc title.
G.TTL Displays group title.
T.TTL Displays track title.
SCROLL Scrolls the displayed title.
FORM2
Button Operation
TTL1 Displays group title and track title.
TTL2 Displays disc title and track title.
SCROLL Scrolls the displayed title.
Notes
! If you do not operate the function within about
eight seconds, the display is automatically re-
turned.
! You cannot use a/b/c/d to select a group or
track in title mode.
! When you select the display FORM2, the titles
are displayed up to 24 letters long.
! If no title has been entered for the currently
playing disc, No title is displayed.
! G.TTL, TTL1 and TTL2 are displayed only
when playing a group-recorded MD.
Built-in MD Player
En
31
English
Section
07