Operation Manual

Adjusting the screen brightnes s
“Brightness” modifies the black level of the
screen.
1 Touch [Picture Adjustment] on the “Sys-
tem Settings” menu.
= For details, refer to Displaying the “System
Settings” menu on page 120.
2 Touch [+] or [-] to adjust the brightness.
Each time you touch [+]or[-] increases or de-
creases the level. 10 to 00 is displayed as the
level is increased or decreased.
3 Touch
to return to the previous
screen.
p You can also start the adjustment by keep
pressing MAP button.
Setting the illumination colour
The illumination colour can be selected from
11 different colours. Furthermore, the illumina-
tion colour can switched between these 11 col-
ours in order.
Selecting the colour from the preset
colours
1 Touch [Illumi Color] on the “System Set-
tings” menu.
= For details, refer to Displaying the “System
Settings” menu on page 120.
2 Touch desired colour.
Current colour balance
Available options;
! Coloured keys — Selects the desired preset
colour
! Memory 1/Memory 2/Memory 3 — Col-
ours registered in the memory
= For details, refer to Creating a favourite
colour and storing it to memory on this
page.
! Scan — Shifts between the eight default
colours in sequence gradually.
Creating a favourite colour and
storing it to memory
You can create a favourite colour and set it as
the illumination colour.
1 Touch [Illumi Color] on the “System Set-
tings” menu.
= For details, refer to Displaying the “System
Settings” menu on page 120.
2 Touch [Custom].
p If [Scan] is set, [Custom] cannot be se-
lected.
3 Touch [+] or [-] to adjust the values for
Red, Green and Blue to create a favourite
colour.
Watch the illumination of hardware keys while
adjusting the colour.
Each time you touch [+]or[-] increases or de-
creases the value of selected item. +31 to +00
is displayed as the value is increased or de-
creased.
p An entry cannot be stored with all of the va-
lues set to “+00”.
Customising preferences
Engb
123
Chapter
21
Customising preferences