Operation Manual

3 Touch desired stage setting.
p “Living Room” setting that emphasizes
mid-range sound hardly has any effect near
the maximum volume level.
p When you set staging to an option other
than “Off”, the high pass filter (HPF) setting
turns “Off”.
= For details, refer to Using the high pass filter
on the previous page.
Adjusting a position effect
You can select a listener position that you
want to make as the centre of sound effects.
1 Display the “AV Sound Settings”
screen.
= For details, refer to Displaying the “AV
Sound Settings” screen on page 138.
2 Touch [Staging].
3 Touch [Position].
4 Touch desired position.
Replicating the settings
You can import settings you have made on the
utility programme navgate FEEDS which is
available separately to the navigation system.
1 Use navgate FEEDS to replicate the set-
tings and store them on an SD memory
card.
2 Insert an SD memory card into the SD
card slot.
= For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 13.
3 Press the HOME button to display the
“Top Menu” screen.
4 Touch [Settings].
The “Settings Menu” screen appears.
5 Touch [Setting Replicator].
A message confirming whether to update the
settings appears.
6 Touch [Yes].
Update starts.
After the settings are updated, a message con-
firming whether to restart the navigation sys-
tem appears.
7 Touch [OK].
The navigation system restarts.
Setting the safe mode
For safety reasons, you can limit the functions
that are available while your vehicle is in mo-
tion.
1 Press the HOME button to display the
“Top Menu” screen.
2 Touch [Settings].
The “Settings Menu” screen appears.
Engb
143
Chapter
26
Customising preferences
Customising preferences