Full Product Manual

16.DISASSEMBLY AND ASSEMBLY FOR COMPRESSOR AND MOTOR
Outdoor unit
48K/60K
Important: Before disassembly and assembly, make sure that the power to the system
has been disconnected and
verified as voltage free.
Step Illustration Handling Instruction
1. Remove external casing
1.
Remove the top cover, handle and
valve cover.
2.
Remove the outer case and right
side plate.
2. Remove motor
1.
Remove the blade nut and then
remove the blade.
2.
Remove the motor from motor
supporter.
3. Remove gas liquid
separator
1.
Reclaim the refrigerant from the
entire system.
2.
Unsolder the 4-way valve piping assy
from gas liquid separator.
3.
Remove the gas liquid separator.
4. Remove compressor
1.
Reclaim the refrigerant from the entire
s
y
stem.
2.
Unsolder the 4-way
v
alve piping assy
from
c
ompressor.
3.
Remove the compressor mounting
bolts.
4.
Carefully remove the compressor from
chassis.
5. Assemble unit
Assemble the unit in the reverse
order of disassembly.
66