Operation Manual

Copying and backup
09
84
En
•Actual recordable capacity of discs vary
so there may be cases where the
contents of the disc you’re backing-up
will not fit on to a particular blank disc. If
this happens, please try another brand of
disc.
• DVD-R/-RW discs can only be backed up
to DVD-R/-RW discs; DVD+R/+RW
discs can only be backed up to DVD+R/
+RW discs.
7 Select ‘Start’ to start writing the
backed-up data to the blank disc.
• To see the progress of the backup, press
DISPLAY.
• You can cancel the backup process by
pressing ONE TOUCH COPY for more
than one second. However, this will
make the disc unusable (although if you
are using a DVD-RW or DVD+RW disc
you can re-initialize it in order to make it
usable again — see Initializing recordable
DVD discs on page 50.)
8 After the recorder has finished
recording the backup disc, you can select
whether to make another backup of the
same data or exit.
• Select Start to make another backup
copy or Ca
ncel to finish. If you want to
make another backup copy, return to
step 7 above.
9 If you don’t need to keep the backup
data on the HDD, you can delete it now.
Select Yes to delete the data from the HDD;
select No to keep it (you can delete it later if
you want to).
• If you decide to leave the backup data on
the HDD, you can make backup copies
to recordable DVD discs anytime from
the Disc Back-up menu.
Write back-up data from Hard Disk Drive.
The disc contents will be overwritten.
OK to start?
Start
Cancel
Disc Back-up
Disc back-up finished.
To make another back-up copy, please load
a recordable disc.
Start
Cancel
Disc Back-up
The backed-up data is still on the HDD.
Erasing it will increase the free space
available. OK to Erase?
Yes
No
Disc Back-up
DVR660HK_KC_EN.book 84 ページ ２００８年２月７日 木曜日 午後２時３４分