Operation Manual

Connections
15
En
02
Chapter 2
Connections
Rear panel connections
1 ANTENNA IN (RF IN)/OUT
Connect your TV antenna to the ANTENNA
IN (RF IN) jack. The signal is passed through
to the ANTENNA OUT jack for connection to
your TV.
2 INPUT 3
Stereo analog audio, video and S-Video
inputs for connection to a satellite receiver,
set top box, etc.
3 OUTPUT 2
Stereo analog audio, video and S-video
outputs for connection to a TV or AV
amplifier/receiver.
4 LAN (10/100)
(DVR-660H-K only)
Ethernet port for 10BASE-T (10 Mbps)/
100BASE-TX (100 Mbps) network connection
(page 26).
5HDMI OUT
HDMI output for high quality digital audio
and video.
6 DIGITAL AUDIO OUT (COAXIAL)
Coaxial digital audio jack for connecting to
an AV amplifier/receiver, Dolby Digital/DTS/
MPEG decoder or other equipmen
t with a
digital input.
7 INPUT 1/AUTO START REC
Stereo analog audio, video and S-video
inputs for connection to a satellite receiver,
set top box, etc.
8 COMPONENT VIDEO OUT
A high-quality video output for connecting to
a TV or monitor with a component video
input.
9 OUTPUT 1
Stereo analog audio, video and S-Video
outputs for connection to a TV or AV
amplifier/receiver.
10 CONTROL IN
Use to control this recorder from the remote
sensor of another Pioneer component with a
CONTROL OUT terminal and bearing the
Pioneer  mark. Connect the CONTROL
OUT of the other component to the
CONTR
OL IN of this recorder using a mini-
plug cord.
11 AC IN – Power inlet
Connect to a power outlet using the supplied
power cable after making all other
connections.
AC IN
CONTROL
IN
S-VIDEO
VIDEOAUDIO
L
R
ANTENNA
IN
OUT
S-VIDEO
VIDEOAUDIO
L
R
Y
P
B
P R
OUTPUT 1
OUTPUT 2
COMPONENT VIDEO OUT
INPUT 1 / AUTO START REC
INPUT 3
COAXIAL
DIGITAL OUT
LAN(10/100)
HDMI OUT
1 2
7
8 9 10 11
3 54 6
DVR-660H-K
DVR660HK_KC_EN.book 15 ページ ２００８年２月７日 木曜日 午後２時３４分