Operation Manual

The Initial Setup menu
16
120
En
Colour RGB (0–255) Use if colours are weak and black appears to ‘float’ on the
RGB (16–235) setting.
RGB (16–235) Use this setting if colours appear overly rich and the black
too deep on the RGB (0–255) setting.
YCbCr 4:2:2 The video signal is output as a YCbCr 4:2:2 component
signal. This is the standard setting for HDMI-compatible
devices.
YCbCr 4:4:4 The video signal is output as a YCbCr 4:4:4 component
signal.
• Depending on the connected device some settings may not be available.
• When a DVI device is connected, the YCbCr 4:2:2 and YCbCr 4:4:4 options are not available.
• You cannot choose YCbCr 4:2:2 when the Screen Resolution is set to 720 x 480i.
Audio Output Auto • Dolby Digital, MPEG and DTS sources are output as a
bitstream signal. However, depending on the Audio Out
setting, number of audio channels, and the HDMI-connected
device, Linear PCM audio may be output.
PCM All audio signals are converted to Linear PCM (except DTS).
Bitstream
Priority
Select if the connected device is compatible with bitstream
audio.
This setting is not available when a DVI device is connected.
HDMI Control On • Enables the HDMI Control function. Select this option when
connected to an HDMI Control-compatible Pioneer Flat
Panel TV or AV system (amplifier or AV receiver etc.).
Off Disables the HDMI Control function. Select this option when
not connected to an HDMI Control-compatible component,
or when connected to a component manufactured by a
company other than Pioneer.
• The KURO LINK function name used on the web and in catalogues is referred to as HDMI Control in the operating
instructions and on the product.
• For more information about HDMI Control, see HDMI Control on page 23.
• This setting is available even if you are not connected to an HDMI device.
• For more information, see Troubleshooting on page 132.
Setting Options Explanation
17 Initial_Settings.fm 120 ページ ２００８年２月７日 木曜日 午後５時５５分