DVD Recorder Operating Instructions DVR-420H, DVR-520H

Recording
06
51
En
VCR Plus+ programming with the power off
You can enter a PlusCode number when the recorder is
in standby. Note that the recording is always made to the
HDD. If you want to record to a DVD disc, you’ll need to
switch on the power and use the full VCR Plus+ program
screen.
Important
• You can’t use this feature until you have set up the
guide channels. See
VCR Plus+ CH Setting on
page 96.
• You can’t change the recording mode.
• You can’t program daily or weekly timer recordings.
1 Press ‘VCR Plus+’.
The front panel display shows the current recording
mode and prompts you to enter the PlusCode number.
2 Use the number buttons to enter the PlusCode
number.
• To clear the last digit entered, press CLEAR .
3 Press ENTER.
The display shows the timer settings:
Date
 Start time  End time  HDD and Recording
channel.
• If
CODE ERROR appears in the display, check that
the PlusCode number is correct and that the guide
channel is set (see
VCR Plus+ CH Setting on
page 96), then set the timer recording again.
• If
CAN’T SET appears in the display, it means that
although you entered a valid PlusCode number, the
program has already finished.
Extending a timer recording in progress
You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.
Moving the end time by 30-minute blocks
1 During timer recording, press and hold  REC for
three seconds.
The timer indicator disappears from the front panel
display.
2 Press  REC repeatedly to extend recording in 30
minute increments.
Programming a new end time
1 During timer recording, press TIMER REC to
display the Timer Recording screen.
You can also access the Timer Recording screen from
the Home Menu (press
HOME MENU , select Timer
Recording
, then Timer Recording (View) ).
ENTER
CLEAR
VCR Plus+
PLUSCODE
29324
HOME
MENU
ENTER
CLEAR
REC
PREV NEXT
STOP REC TIMER REC

HDD Remain ---h--m(FINE)
DVD Remain 0h43m(FINE)
New Input
Date Start Stop CH Mode Rec to Confirm
1/1
Timer Recording
12/13 MON
12/14 TUE
7:00 PM
9:00 PM
8:00 PM
10:00 PM
32
43
FINE
FINE
HDD
HDD
OK
OK
DVR-04_HDD_KU.book 51 ページ ２００４年４月１５日 木曜日 午前１０時４８分