Manual

o_
,m
==
0
Item
Aspect
Digital
output
Video
output
Down
sampling
Details
When watching wide mode software, this lets you adjust aspect ratio to
suit your TV
You can switch between audio output from the player's digital output jack or
the digital coaxial PCM/rlrliack Dolby Digital (sound system used at cinemas
etcl and Linear PCM (the same digital signal as CDs) are the two standards
for DVDs
This lets you select between component output and regular output of video
signals rf you select component output, the signal from the video output
jack becomes black and white. You cannot switch to Component for watching
video on LDs, CDVs or CDs bearing the GRAPHICS mark With these discs,
the player automatically switches to (S) video output
96 kHz: Wilh PCM audio sources that have a sampling frequency of 96 kHz,
this assures high sound quality With audio sources that have a sampling
frequency of 48 k Hz, play is performed with sampling frequency unchanged
at 48 kHz
48 kHz: During play this compresses sampling frequency of 96 kHz discs
to 48 kHz 48 kHz discs are played as they are, at a sampling frequency of
48 kHz
• You can select the sampling frequency to match that of the audio signal
recorded on a disc Simultaneous switching of the Analog output and Digital
output is performed to match your selected sampling frequency
• Some 96 kHz DVDs are copy protected With this kind of disc, no signal is
output from the digitar output terminal
Settings status
Initial settings
(factory settings )
Wide
I PCM/DOLBY DIGITAL
Automatically selects
between Dolby Digital
This is when using an
amp with a Dolby
Digital (AC-3) decoder
(S) video output
96 kHz
Pan & Scan Letterbox
PCM
Dolby Digital and
linear PCM signals are
output in line with the
linear PCM standard
This is when using a
regular amp or Dolby
Pro Logic amp
Component output
48 kHz
To return to the initial factory settings if they have been changed since you first purchased the player, perform the following
procedures. _ ,;,_
If power to the player is ON, switch it OFF While power is OFF, press the button while pressing the 0 button
Outline of GUI (Graphical
42 User Interface) operation