System information

Evan Knoble – KNOBLE ARTS

Unlock Your DVD Region Code

2. Using the remote press 2, 8, 1, 2

3. The display should show a hidden dialog where you can change the region

code (9 = Region Free)

Decca DV-2110

1. Press SETUP on the remote

2. Press STOP on the player

3. Press PREVIOUS

4. Press NEXT

A menu should appear (codefree=Bypass) where MacroVision also can be

disabled.

Decca DDV-2120

1. Open tray to make sure no disc inside

2. Press SETUP

3. Move cursor down to highlight to the peferences bar

4. Press 4, 9, 5, 4, 0 in rapid succession

The current version will be displayed

5. Move cursor down to highlight version bar

6. Press PLAY, then right arrow key to highlight version number

7. Use UP/DOWN keys to set the version number

8. Press PLAY, SETUP

Decca DDV-2141

1. Press the OPEN/CLOSE button on the player

2. Press SETUP on your remote

3. Press 4, 9, 5, 4, 0

4. The word Version will appear on the onscreen display

5. Select the new Version option from the menu

(0 for multi-region)

You can also enable VCD, SVCD and WMA playback from this menu

Denon DN-V300

1. Turn the unit on

2. Press the OPEN/CLOSE button

3. Press CLEAR, 1, 4, 7, 0, CLEAR - "TEST MODE" will appear on the display.

4. Press UP; "00 XX" (XX is a numerical value) will appear on the display. The

first two digits are incremented by one, every time you press UP

5. Press the UP key until you see "12 XX" (default is 24) on the display

6. Press 2, 3, ENTER

7. Press UP key again and you will see "13 XX" (default is 23). If it does not say

"23", press 2, 3 on the remote and then the ENTER button

8. Press the UP key again and you will see "14 XX" (default is 01).

9. Press 0, 0, ENTER

10. Press RETURN

11. Press CLEAR twice