Manual

The Initial Settings Menu
DTS Out
• Default setting: Off
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one, of the digital
outputs.
_.lnitial Settings '
J
[.Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language
Display 96 kHz PCM Out
Options
If your AV receiver (or other connected
component) has a built-in DTS decoder, set
this to DTS, otherwise set to Off. Check the
manual that came with the ,other component
if you're unsure whether it is DTS compat-
ible.
D Note
• If you set to DTS with a non-DTS
compatible amplifier, noise will be
output when you play a DTS disc.
96kHz PCM Out
• Default setting: 96kHz > 48kHz
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
If your AV receiver (or other connected
component) is compatible with high
sampling rates (96 kHz), set this to 96kHz,
otherwise set it to 96kHz > 48kHz (96 kHz
audio is converted to a more compatible 48
kHz). Check the manual that came with the
other component if you're unsure whether it
is 96 kHz compatible.
MPEG Out
• [Default setting: MPEG > PCM
You only need to make this setting if you
conne.cted this system to an AV receiver (or
other component) using one of the digital
outputs.
_ _ !:_ t _i¸
[Digital Audio Out Digital Out
VldeQ Output Dolby Digital Out
Language DTS Out
Display g6 kHz PCM Out
Opltlona
If your AV receiver (or other connected
component) is compatible with MPEG audio,
set this t:o MPEG, otherwise set it to MPEG >
PCM (MPEG audio is converted to more
compatible PCM audio). Check the manual
that came with the other component if you're
unsure whether it is MPEG audio compat-
ible.
initial Settings
f
Digital Audio Out
Video Output
Language
Display
Options
En