Manual

D The Audio Settings Menu
Audio DRC
• Default setting'. Off
When watching Dotby Digital DVDs at low
volume, it's easy to lose the quieter sounds
completely--including some of the dialog,
Switching Audio DRC (Dynamic Range
Control) to On can help by bringing up the
quieter sounds, while controlling loud peaks.
How much of a difference you hear depends
on the material you're listening to. If the
material doesn't have wide variations in
volume,.you may not notice much change.
1 Press SETUP and select'Audio Set-
tings" from the on-screen display.
I%_ Audio Settings
2 Highlight Audio DRC, then use the
<-/ + buttons (cursor left/right) to change
to "On" or "Off', as required.
G Note
• Audio DRC is only effective with Dolby
Digital audio sources,
• Audio DRC is only effective through the
digital output when Digital Out is set to
On, and Dolby Digital Out is set to
Dolby Digital > PCM. See page 46
• The effect of Audio DRC depends on
your speakers and AV receiver settings.
Virtual Surround
• Default setting: Off
Switch on Virtual surround to enjoy surround
sound effects from just two speakers,
When you play a Dolby Digital 3/2.1 channel
soundtrack Virtual Dolby Digital, which uses
TruSurround technology from SRS, produces
a deep, realistic 3D soundspace from a pair
of stereo speakers.
When playing CDs Video CDs and
2 channel Dolby Digital software, SRS 3D
Surround works to simulate surround sound.
3 Press ENTER to make the setting and
exit the Audio Settings screen.
LI_I
TruSurround
by SRS CO_)"
En