Manual

< Connecting Up
Easy connections
P-T_I1_1
/
1
TV
II_0 n 1
r
AC IN
The setup described here is a basic setup
that allows you to play dis,cs using just the
cables supplied with the player, In this setup,
stereo audio is played through the speakers
in your-iV.
A Important
• This player is equipped with copy
protection technology. Do not connect
this player to your TV via a VCR (or your
VCR via this player) using AV cables, as
the picture from this player will not
appear properly on your-iV. (This player
may also not be compatible with some
combination TV/VCRs for the same
reason; refer to th_ manufacturer for
more information.
_To power outlet
1 Connect the VIDEO OUT and AUDIO
OUT 1L/R jacks to a set of A/V inputs on
your TV.
Use the supplied red/white stereo audio
cable and the yellow video cable. Make sure
you match up the left and right audio
outputs with their corresponding inputs for
correct stereo sound,
• The two pairs of analog audio outputs
are exactly the same; use whichever is
convenient,
• See the following page if you want to
use S-Video or component video cables
for the video connection.
2 Connect the supplied AC power cord
to the AC IN inlet, then plug into a power
outlet.
En