Owner's manual

The Video Settings Menu 07
54
En
Creating your own presets
You can create up to three presets of your
own.
1 Select one of the Memory presets (see
above).
2 Use the joystick (down) to select
‘Detailed Settings’ then press ENTER.
Memory1
Detailed Settings
Video Adjust
3 Adjust the picture quality settings.
Recall Settings
Prog. Motion
PureCinema
YNR
CNR
MNR
BNR
Memory1
Auto
Memory1 1/ 3
fast slow
off max
off max
off max
off max
• Use the joystick (up/down) to select a
setting.
• Use the joystick (left/right) to adjust the
current setting.
• Press DISPLAY to switch between full
and single view.
• You can change the preset number from
the Recall Settings menu item.
You can adjust any or all of the following
picture quality settings:
• Prog. Motion – Adjusts the motion and
still picture quality when the player is
set to progressive video output.
• PureCinema – When watching DVD
movies, PureCinema optimizes the
picture quality. The default setting is
Auto, but if the picture appears unnatu-
ral, then set to On or Off, as appropriate.
Video Adjust
• Default setting: Professional
From the Video Adjust screen you can select
the standard video presentation or define
presets of your own.
1 Press SETUP and select ‘Video Adjust’
from the on-screen display.
You can also access these settings by
pressing V.ADJ (VIDEO ADJUST).
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
Video Adjust
2 Use the joystick (left/right) to select a
preset.
Professional
Video Adjust
• TV (CRT) – Optimized display for a
regular CRT TV
• PDP – Optimized display for a plasma
display screen
• Professional – Optimized for a profes-
sional video monitor
• Memory1–3 – Use for saving your own
presets (see below)
3 Press ENTER to make the setting and
exit the Video Adjust screen.
• Depending on the disc and the TV/
monitor, you may not see the effect
clearly.