Owner's manual

Getting Started04
34
En
Video CD PBC menus
Some Video CDs have menus from which
you can choose what you want to watch.
These are called PBC (Playback control)
menus.
You can play a PBC Video CD without having
to navigate the PBC menu by starting
playback using a number button or track
skip button (¢) to select a track, rather
than the 3 (play) button.
E/
E/
SETUP
TOP MENU
MENU
MULTI SPEED +
ENTER
VIDEO
ADJUST DIMMER
JOG MODE
RETURN
V.A DJ
FL JOG
PLAY MODE SURROUND
873
1 ¡
0987
ENTER
654
C321
CLEAR
TV CONTROL
Button What it does
(RETURN) Displays the PBC menu.
Numbers Use to enter a numbered
menu option. Press ENTER to
select (or wait a few seconds).
4 Displays the previous menu
page (if there is one).
¢ Displays the next menu page
(if there is one).
After I load a DVD disc, it ejects automati-
cally after a few seconds!
Most likely, the disc is the wrong region
for your player. The region number
should be printed on the disc; check it
against the region number of the player
(which you can find on the rear panel).
See also page 9.
If the region number is OK, it may be
that the disc is damaged or dirty. Clean
the disc and look for signs of damage.
See also pages 7273. Check also that
the disc is aligned properly in the disc
tray and that its loaded label-side up.
Why won’t the disc I loaded play?
First check that you loaded the disc the
right way up (label side up), and that its
clean and not damaged. See pages 72
73 for information on cleaning discs.
If a disc loaded correctly wont play, its
probably an incompatible format or disc
type, such as DVD-ROM. See pages 89
for more on disc compatibility.
There’s no picture!
Check the front panel and make sure
that the VIDEO OFF indicator isnt lit. If
it is, press the VIDEO OFF button to
switch the video output back on. See
also page 20.
Also make sure that if your TV isnt
compatible with progressive scan video,
that the PROGRESSIVE indicator isnt lit.
If it is, press the PROGRESSIVE button
to switch the video output back to
interlace. See also page 20.