Owner's manual

Controls and Displays 03
20
En
8 8 (pause)
Press to pause playback. Press again to
restart
9 3 (play)
Press to start or resume playback (when in
standby, this button will also switch the
power on)
10 ¡ ¢ (forward scan/skip)
• Press and hold for fast forward scanning
• Press to jump to the next chapter or track
11 4 1 (reverse scan/skip)
• Press and hold for fast reverse scanning
• Press to jump back to the beginning of the
current chapter or track, then to previous
chapters/tracks
12 Display
See page 22 for a description of the display
13 Remote control sensor
The remote control has a range of up to
about 7m.
14
This mark indicates compatibility with
DVD-RW discs recorded on a DVD recorder
in Video Recording mode.
1
STANDBY/ON
Press to switch the player on or off (the
player can be put into standby using the
remote control; the standby indicator above
the button lights when in standby)
2 i.LINK indicator
Lights when audio is being sent over the
i.LINK interface to a compatible component.
3 PROGRESSIVE button/indicator
Press to switch the progressive video output
mode between progressive and interlace.
The indicator lights in progressive scan
mode. See also Component Out on page 58.
4 VIDEO OFF button/indicator
Press to switch the video output on/off. The
indicator lights when the video output is
switched off (when listening to a DVD-Audio
disc, for example)
5 Disc tray
6 0 OPEN/CLOSE
Press to open or close the disc tray (when in
standby, this button will also switch the
power on)
7 7 (stop)
Press to stop the disc (you can resume
playback by pressing 3 (play))
STANDBY/ON
Î
‹
PLAY
AUDIO/VIDEO
‹
OPEN/CLOSE
)
*&
$! ⁄›
PROGRESSIVE VIDEO OFF
76
1
5
2 3
4
8 9
11121314 10
RW
COMPATIBLE
Front panel